Used Hurlimann 913 Xt for sale (1,215)

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: Gtedsxd U Saepfx Afaou The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: new, empty load weight: 480 kg, maximum load weight: 820 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,530 mm, loading space height: 450 mm, tire size: 195/50R13C, Lowering trailer with dropside kit from trailer manufacturer STEMA model WOM XT - STS XT O2 13-25-15.1. A Senkomat or lowering lift trailer is often purchased by motorcyclists. It is well suited for one or two motorcycles, but also for quad bikes, ATVs, lawn mowers and small machines. A three-sided perforated railing and a perforated profile in the middle of the floor secure the load. The trailer is lowered using a manual hydraulic system. The car trailer is characterized by its user-friendliness and stability. The standard equipment of the lowerable car trailer includes the three-sided perforated railing, removable attachment, lashing profile in the middle of the floor, support wheel, fold-down license plate holder, manual hydraulics, sturdy welded frame, hot-dip galvanized and a V-drawbar. Gtjdpfxjq Ru S Do Afasu As accessories we have motorcycle rockers, motorcycle stand rails, tarpaulin and frame, side wall attachment, 100 km/h damper and TÜV, tool box, motorcycle lashing straps, lashing straps and trailer lock.

Condition: new, empty load weight: 480 kg, maximum load weight: 820 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,530 mm, tire size: 195/50r13c, Lowering trailer from trailer manufacturer STEMA model WOM XT - STS XT O2 A Senkomat or lowering lift trailer is often purchased by motorcyclists. It is well suited for one or two motorcycles, but also for quad bikes, ATVs, lawn mowers and small machines. A three-sided perforated railing and a perforated profile in the middle of the floor secure the load. The trailer is lowered using a manual hydraulic system. The car trailer is characterized by its user-friendliness and stability. The standard equipment of the lowerable car trailer includes the three-sided perforated railing, lashing profile in the middle of the floor, support wheel, fold-down license plate holder, manual hydraulics, sturdy welded hot-dip galvanized frame and a V-drawbar. The exact equipment and technical details can be found below. As accessories we have motorcycle rockers, motorcycle stand rails, tarpaulin and frame, side wall attachment, 100 km/h damper and TÜV, tool box, motorcycle lashing straps, lashing straps and trailer lock. Gtedpfx Asfr Uxbofasu

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: electric, drive type: Elektro, Pressure Washer Condition: New Gtedpfxsxmb Sfe Afaju Technical Condition: New Description: New

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: electric, drive type: Elektro, Industrial vacuum cleaner Condition: New Technical condition: New Gtodpfx Afexmb R Ueaou Description: New

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 51 54 3, Spiral drill grinding machines - Year of manufacture: 2006 - Fully functional, ready for demonstration - Grinding range: 3 – 21 mm - Conical surface grinding - Cross-point grinding Gtsdpfexnl Ndox Afaeu - Point angle: 118° - 150°, steplessly adjustable - Speed: 2850 rpm - Weight approx. 25 kg - With additional dust extractor

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3520191300779, operating pressure: 220 bar, input voltage: 400 V, overall weight: 85 kg, The Nilfisk MC 5M is equipped with a hose reel and a new rotor nozzle. The water pressure can be adjusted using a dial on the high-pressure cleaner. It is extremely maneuverable and a so that it can also be used on the move in everyday work. Technical data Gtjdouwlxfjpfx Afasu Pressure: 220 bar Cleaning effect: 6.2 Max. Inlet temperature: 60 degrees Dimensions: 890x570x1020 (length x width x height ) in mm Weight: 85

Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, functionality: fully functional, - Top functional packaging machine (thermoforming machine) of the PowerPak series. - Perfect for packaging pasta products. - Viewing under production conditions (packaging of gnocchi) possible at any time. - With matching feed belt and ExaktaPack brand scale (included). Technical details GEA PowerPak: Gsdeua Hchepfx Afastu - Film width: 350 mm lower web, 334 upper web - Approx. 12 cycles / minute - Forming tools: 1.1, 2.1, 2.2 - Rigid film, PP, PET, etc. - Bottom web preheating - Longitudinal and cross cutting with silent edge strip winding - Machine length approx. 9m - Draw-off: 60 mm - Busch vacuum pump (included) - Eject station and distribution pneumatic - Flow cooler for cooling form and seal stations. Additional information on request and/or inspection gladly possible.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Polar Mohr 78 XT Year of manufacture 2004 Program, upgraded air table, left and right storage table; 2 knives, complete documentation, tools Gtedpfswl Am Rex Afaju Visually and technically in perfect condition

Condition: good (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 15,500 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 15,500 mm, total length: 17,000 mm, total width: 2,500 mm, spindle motor power: 2,400 W, number of spindles: 1, number of slots in tool magazine: 17, Equipment: chip conveyor, rotational speed infinitely variable, The machine is being sold due to company restructuring. Godpfowwm Ayjx Afaetu

Year of construction: 2023, condition: new, functionality: fully functional, Xtrutech XTS 35 for powder coatings (180-350 kg/hr) 1. PURPOSE AND MAIN FUNCTIONS OF THE LINE The extrusion line for powder coating production is part of a whole production process and is used for the production of polymer powder coatings. The extrusion line includes the following technological processes: formation of a homogeneous melt of heated powder coating by mixing, shaping of the melt, subsequent cooling of the product and its crushing into fine fractions. 2. LINE COMPONENTS - Twin-screw extruder type XTS 3. DESCRIPTION OF THE EXTRUDER COMPONENTS 3.1. Twin-screw extruder type XTS 35 The extruder for powder coating production consists of: Gtedpfx Afowz Ntieaeu - 24D hydraulically opening barrels at the top and bottom, providing quick access for cleaning, maintenance and emergency repair of barrel liners and screw element shafts. - Rectangular loading port for dosing of materials which are difficult to dose. - Robust high flow water cooled units with 5 electrically heated (aluminium bronze heating plates of 2 kW each) control zones that provide excellent temperature control. Maximum operating temperature is 350°C. - The barrel on the discharge side is equipped with a cooled discharge adapter and a knife. - Screws with screw elements. Screw speed 0 - 900 rpm. Water cooled AC motor power of 26kW. The stepless (PIV) gearbox is rated at 139Nm and protected by an automatic torque limiter. - Latch lock / quick-release coupling of shaft connection and toothed shaft. Mains supply voltage: 400±6%, 3 phases, 50 Hz (o+earth). Control: 24V. Water-supply: 70 l/min at 15°C and a coolant pressure of 4bar. Approximate dimensions: L=2250mm W=1000mm H=1600mm Approximate weight: 1600kg. High-volume geometry D/d =1.8 AC motor power 26 kW Screw speed 900 rpm Average output 180 - 220 kg/h, max. 350 kg/h

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm Godpfx Ajxvr Upsfaotu - Low and high temperature alarm - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,795 h, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840 D ShopMill, rotational speed (max.): 6,000 rpm, The sliding surface of the base carriage X/Y was renewed in 2022! TECHNICAL DETAILS Travel range X-axis: 1,760 mm Travel range Y-axis: 600 mm Travel range Z-axis: 800 mm horizontal Travel range Z-axis: 770 mm vertical A-axis: ±100° Faceplate diameter: 520 mm Rapid traverse X/Y/Z: 40/40/30 m/min Number of controlled axes: 5 Spindle speed range: 30 - 6,000 rpm Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool stations: 36 MACHINE DETAILS Control: Siemens 840 D ShopMill Dimensions & Weight Required floor space (L x W x H): 5.2 x 3.4 x 3.3 m Machine weight: 12,000 kg Operating hours: 41,795 h Gtjdjyfriaopfx Afaeu EQUIPMENT NC rotary table AXA RTA 4L-520 Manual tailstock, center height 280 mm Internal coolant supply (IKZ): 30 bar Chip conveyor, discharge left Integrated coolant tank 200 l Coolant tank 400 l 3D touch probe, Renishaw RMP 60 with RMI receiver Direct linear measurement system Heidenhain Hardened flat guides Counter-guides coated with sliding material (Turcite)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Gtjdpfjyf E D Rox Afaou Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,696 mm, controller model: KUKA KR C4, Auction of a set consisting of 3 KUKA KR 210 R2700 extra and 1 KUKA KR 210 R2700 extra FLR! Serial numbers: 8104130 / Year: 2020 Serial number: 1348207 / Year: 2020 Serial number: 1348187 / Year: 2020 Serial number: 8101962 / Year: 2020 TECHNICAL DETAILS Payload: 210 kg Reach: 2,696 mm MACHINE DETAILS Controller: KUKA KR C4 Weight per robot: approx. 1,068 kg Power supply: 3 × 400 V / 50–60 Hz EQUIPMENT 4 KUKA KR 210 R2700 extra / FLR industrial robots 4 KUKA KR C4 control cabinets 3 KUKA SmartPad (pendant) 4 robot controller cable sets Gtjdpeyft N Usfx Afasu Note: 2 robots are each missing 2 KSP modules in the control cabinet. 1 robot is missing 1 KSP module and the pendant.

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 560123, functionality: fully functional, volume flow: 16,000 m³/h, total length: 12,000 mm, total width: 2,400 mm, Equipment: CE marking, TECHNICAL DETAILS Capacity: 16,000 m³/h Number of filter bags: 180 pcs Connection diameter: 600 mm Main fan: 22 pcs MACHINE DETAILS Dimensions (L x W): 12,000 x 2,400 mm Gtedpfx Ajyh Nyfefaou EQUIPMENT CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 4,000 mm, sheet thickness (max.): 6 mm, back gauge: 700 mm, overall weight: 7,500 kg, distance between stands: 4,010 mm, TECHNICAL DETAILS Sheet width: 4,000 mm Sheet thickness: 6 mm Frame gap: 4,010 mm Back gauge: 700 mm MACHINE DETAILS Gsdpfxoyhmfzs Afaotu Machine weight: 7,500 kg Total power: 16 kW

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Gedpfoxd D Nnjx Afastu

Condition: used, Polystruder Extruder with Berringer water ring Pelletizer, 250 HP, 3 phase motor, with screen changer, includes spin dryer, and hopper. Godpfxjxd D I De Afaotu

Condition: good (used), Stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, small load carriers, storage bins, shelf boxes, shelf boxes -Manufacturer: Schoeller, Arca Systems shelving units -Type: 9133 -Number: 1190 boxes available -Price: per piece, minimum order 5 pieces -Dimensions: 595/230/H100 mm -Weight: 0.7 kg/pc. Gedpfx Afouzn Dxjastu

Condition: good (used), axle configuration: 3 axles, first registration: 06/2002, suspension: air, color: blue, Year of construction: 2002, Equipment: ABS, Axle configuration Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.300 kg Carrying capacity: 37.700 kg GVW: 43.000 kg Gjdpfx Afeyilzzjaetu Functional Extendable superstructure: Yes Condition Technical condition: good Visual appearance: good Identification Registration number: OG-45-VS Additional information Please contact Arie or Pedro for more information Extendable: front, middle and back

Condition: good (used), mileage: 381,470 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, fridge, hill-start assist, onboard computer, parking heater, power assisted steering, power mirror, retarder, second fuel tank, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 8.038 kg Carrying capacity: 11.462 kg GVW: 19.500 kg Gjdpfxjyh Hmps Afaetu Maintenance, history and condition APK (MOT): tested until 05/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: good (used), mileage: 424,069 km, power: 346 kW (470.43 HP), first registration: 03/2021, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, fridge, hill-start assist, onboard computer, parking heater, power assisted steering, power mirror, retarder, second fuel tank, spoiler, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 8.083 kg Carrying capacity: 11.417 kg GVW: 19.500 kg Maintenance, history and condition APK (MOT): tested until 04/2026 Technical condition: good Gtjdsyh E Ilspfx Afasu Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: good (used), mileage: 455,440 km, power: 346 kW (470.43 HP), first registration: 03/2021, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, fridge, hill-start assist, onboard computer, parking heater, power assisted steering, power mirror, retarder, second fuel tank, Technical information Godpfxoyh E Dao Afaetu Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 8.098 kg Carrying capacity: 10.902 kg GVW: 19.000 kg Maintenance, history and condition APK (MOT): tested until 04/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: good (used), mileage: 413,779 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, fridge, onboard computer, parking heater, power assisted steering, power mirror, retarder, second fuel tank, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 8.090 kg Carrying capacity: 10.910 kg Gsdpfx Afoyh E Aceaetu GVW: 19.000 kg Maintenance, history and condition APK (MOT): tested until 05/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information