Used Mc Cormick Mtx 165 for sale (2,991)

Condition: used, Year of construction: 1998, stations 16 max. speed sets 3500 /h max. paper size 32 x 47 cm stiching folding unit SPF-10 II Trimmer FC-10 II Gbedpfx Agszvq D Njvst

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 9,613 h, load capacity: 3,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,700 mm, fork length: 1,200 mm, empty load weight: 4,930 kg, drive type: Diesel, Rough terrain forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Gjdezxi Ryjpfx Agvobt Mast type: Telescopic Transmission: Torque converter Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 400x70-20 Rear tire type: Pneumatic Rear tire size: 10x17.5 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and is FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease-to-own and financing options are available on request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Side shifter, 3rd valve, rear work light, front work light, heater, full cabin, interior mirror, exterior mirror, windshield wiper, single pedal, seat.

Condition: used, Year of construction: 2007, Technical Specifications – STAMA MC 334 Manufacturer: STAMA Maschinenfabrik Model: MC 334 Year of Manufacture: 2007 Machine No.: KMM 334 2052 Electrical Data Connection Voltage: 400 V / 3 Phase / 50 Hz Nominal Current: 65 A Recommended Fuse: 3 × 80 A Minimum Connection Cable Cross Section: 35 mm² Total Connected Load: 125 kVA Total Power Requirement: 110 kW Spindle Tool Interface: HSK 63 Spindle Bearing Diameter: 65 mm Spindle Arrangement: a = 400 mm Maximum Torque: 200 Nm (20% duty cycle) Spindle Speed: 20 – 15,000 rpm Travels X-Axis: approx. 900 mm Y-Axis: approx. 900 mm Z-Axis: approx. 1,125 mm Feed Rates Feed Rate (X/Y/Z): 1 – 10,000 mm/min Rapid Traverse: X-Axis: 60 m/min Y-Axis: 60 m/min Z-Axis: 60 m/min Maximum Feed Force X-Axis: 7,000 N Y-Axis: 7,000 N Z-Axis: 8,000 N Tool Magazine Magazine Capacity: 90 tools Tool Clamping Force: 8,000 N Maximum Tool Diameter: 160 mm Maximum Tool Length: 350 mm Tool Data Tool Dimensions: Standard Tool Weight: 1.8 kg Maximum Tool Weight: 12 kg (with every other pocket free) Maximum Tool Diameter: 300 mm Godpfxjznc I Ds Agvebt Machining Capacity Maximum Milling Capacity: 600 cm³ Maximum Drilling Diameter: Ø40 mm Maximum Thread Size: M30 Machine Dimensions Length: 2,500 mm Width: 2,060 mm Height: 3,300 mm

Condition: used, Year of construction: 1998, total width: 2,600 mm, total height: 1,900 mm, Colour: White Empty weight: 6.500 kg Dimensions (LxBxH): 590 x 260 x 190 cm - Details: - └ Description: Gas springs are weak - Year: 1998 - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - Min. planing width [mm]: 15 - Max. planing width [mm]: 230 - Min. planing height [mm]: 10 - Max. planing height [mm]: 150 - Feed table length [mm]: 1570 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.5 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 120 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 24 - └ Feed speed control: Incremental - Transport dimensions: 5900mm x 2600mm x 1900mm (l x w x h) Gbedpoxlthijfx Agvot - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2001, operating hours: 28,000 h, spindle speed (max.): 3,600 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 930 mm, Manufacturer: Spinner Model: MC 500/1000 Year of manufacture: 2001 Control system: Siemens SINUMERIK 810D Turning spindle: 3600 rpm, 11 kW, 172 Nm Technical features: Turning spindle: 3,600 rpm, 11 kW, 172 Nm 12-position tool turret (VDI 30) Hydraulic steady rest, base body manual – MK4 Hydraulic chuck, Ø 250 mm Chip conveyor Coolant pump C-axis: 360° Travel distances Godpjztpvfjfx Agvebt X-axis: 210 mm Z-axis: 930 mm C-axis: 360°

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 18,000 h, control type: CNC control, actuation type: electric, controller model: AMNC-F (FANUC 180i-PB), punching force: 20 t, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, Manufacturer: Amada Model: EM 2510 NT Gbjdpfozzrn Tjx Agvst Punching force: 20 tons (200 kN) Year of manufacture: 2007 Stroke length (X/Y): 2500 x 1270 mm (expandable for larger sheets) with repositioning Turret configuration: 45 stations with 4 automatically indexable stations Control system: AMNC-F (FANUC 180i-PB) Touchscreen operation Power supply: 27 KVA Equipped with brush tables The machine is in very good condition! It can be inspected in working order on site. The machine will be supplied with several tools. Information and price available upon request.

Condition: excellent (used), SPINNER TC52-MC CNC turning machine with bar feeder Year of manufacture: 2004 Gbodpfx Ajzw Avyogvot Control system: Siemens 810 D ShopTurn Turning diameter: 280 mm Turning length: 550 mm Tool holder: VDI 30 Spindle speed max.: 5,000 rpm Tool turret positions: 12 Speed of driven tool: 6,000 rpm Torque of driven tools: 23.5 Nm Rapid traverse X/Z: 15 / 24 m/min Bar diameter: 52 mm

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Gedpfjzvni Aox Agvjbt Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Gedpozwm Akofx Agvebt Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: excellent (used), functionality: fully functional, Stephan MC 15 Vertical Microcutter / Emulsifier Brand: A. Stephan u. Söhne GmbH & Co. Model: MC 15 Power: 11 kW Voltage: 380 V 50 Hz Current: 21.5 A Gjdpfx Agoyr S R Rjvjbt Rotational speed: 2,900 rpm Duty cycle: ED 100 (continuous operation) Protection class: IP 44 The compact vertical Stephan MC 15 emulsifier is a reliable unit for ultra-fine chopping and homogenization of food products. With its 11 kW motor and high rotational speed (2,900 rpm), the machine excels at producing emulsions, sauces, and fine meat fillings. Its robust construction, combined with continuous operation capability (ED 100%), makes it a highly efficient component of any production line.

Year of construction: 2004, condition: good (used), Spritzgiessmaschine bis 5.000 KN Machine type: Krauss Maffei KM 2300-12000 MC Year: 2004 Control: CNC MC4 Working hours: 93.900 h SPECIFICATIONS Closing unit Closing force: 23,000 kN Maximum tool opening force: 1,420 kN Thrust force of the movable plate (opening): 227 kN Clamping force of the movable platen (closing): 203 kN Tool clamping area (H x W): 2,830 mm x 2,400 mm Gbedpezi Sfzofx Agvst Stand spacing (H x W): 2,000 mm x 1,600 mm Tool opening stroke: 2,600 mm Min. tool height: 1,100 mm Maximum tool height: 1,800 mm Maximum tool spacing: 3,700 mm Hydraulic ejection stroke: 350 mm Ejector force (forward/reverse): 415/115 kN Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Displacement: 8,588 cc Projectile weight (PS): 7,815 g Injection capacity: 1,019 cc/s Screw speed: 113 rpm Maximum plasticizing capacity: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated power of the pump motor: 132 kW Installed heating capacity: 997 kW Adjustable cylinder heating zones: 7 Number of drying cycles: 350 per hour Tank capacity: 2,500 L Dimensions and Weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total weight of the machine: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 Robot X-Axis: 2.000 mm Y-Axis: 3.000 mm Z-Axis: 5.000 mm

Condition: good (used), mileage: 105,756 km, power: 338 kW (459.55 HP), first registration: 10/2017, fuel type: diesel, wheelbase: 5,650 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: AdBlue, = Additional options and accessories = Gjdpfx Agoxzq Hhsvobt - PTO (Power Take-Off) = Further information = Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 20,300 kg Payload: 16,700 kg Gross vehicle weight: 37,000 kg Technical condition: good Visual condition: good

Condition: ready for operation (used), Year of construction: 1985, Mazak Slant Turn 40 MC CNC lathe with chip conveyor. Year of manufacture 1985, weight 8 tons. Control system Mazatrol T3, with three-jaw chuck, tool turret, tailstock. Ready for use, can be viewed while still powered. Godpovzgyhefx Agvebt

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Gbjdpoxqh I Ijfx Agvst Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: used, Year of construction: 2007, saw-blade dia. 250 mm Godpfsztrwljx Agvebt turning speeds 2800 U/min pressure 6-7 bar weight of the machine ca. 273 kg

Condition: used, Year of construction: 2017, x-travel 700 mm y-travel 700 mm z-travel 700 mm Control Siemens type 840Dsl Number of spindles 2 St. Gbsdpfx Asyquarjgvst Double reversible clamp The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° Gsdpfx Agox Hn D Rjvobt hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: excellent (used), Year of construction: 2008, overall weight: 910 kg, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: Fanuc, controller model: Fanuc systemR-30iA, teach pendant model: Fanuc A05B-2301-C300, Equipment: documentation/manual, Fanuc R-2000iB/165F industrial robot. A 6-axis robot with a payload capacity of 165 kg and a reach of 2655 mm. Year of manufacture approximately 2008. The robot is equipped with Fanuc servo drives and aiA128 encoders. Robot weight is 910 kg. Fanuc R-30iA robot controller with control panel included. Gbjdpfxozcftto Agvst

Condition: good (used), Year of construction: 1990, machine/vehicle number: 14076, Offer 26143 Technical data: - Maximum turning height 165 mm - Maximum turning length 750 mm - Turning diameter over bed 330 mm - Turning diameter over compound slide 170 mm - Spindle bore 42 mm - Taper of tailstock quill MK 3 - Travel of tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + facing - Metric thread pitches - Inch threads - Module threads - Drive 400 V / 1.5 / 2.8 kW - Including: - 2 x 3-jaw chuck - Steady rest Gbedpfxezdq I Ro Agvjt - 4 x HSS tool holders - Various turning tools - Space requirement approx. B 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: M06I/8947, Offer Number: M06I/8947 Machinetype: double blow header Make: FENG PEI Type: FWB 20-165 Constr. year: 2000 diameter range: 6 mm Gbsdpfewi Tcwsx Agvjt shaft length under head: 145 mm cutting length: 165 mm output - pieces/min: 100 Location: Germany

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 510424, Equipment: documentation/manual, Machine in very good condition. Y and B axes available, with a subspindle. It is connected to power and can be inspected at any time. Gbodpfx Aszyypcjgvet The machine is 100% complete, with numerous driven tool holders and spindle diameter reducers. 2 x HAINBUCH 65 BZI. Parts conveyor, chips conveyor, and Sameca bar feeder available. 2 x Spindle bore 60 mm. Tool holders VDI25.

Condition: good (used), Year of construction: 2001, functionality: fully functional, The machine is in good technical condition, test run possible, Siemens Sinumerik 840D control system. Pallet dimensions: 500 x 630 mm Gbedpfx Agex A Ewkjvst Axis travels X / Y / Z: 1 - 60,000 mm/min Tool magazine: 60 positions Specifications: X axis: 800 mm Z axis: 800 mm Y axis: 800 mm Max. workpiece weight: 800 kg Spindle taper: HSK 80 A Tool diameter: 95 mm Machine weight: 12,000 kg Dimensions (L x W x H): 8000 x 4900 x 3800 mm

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm Gbsdpfevu E R Sjx Agvjt diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Gsdpfx Aozd Ta Negvebt Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: used, Drop feed chipper type Erjo 165 SN. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Gbsdezam Dnjpfx Agvot