CNC press brake PETERZEN MORICO 70065

Year of construction

2025

Condition

New

Location

Douarnenez France

Machine data

Machine type:: CNC press brake PETERZEN MORICO 70065

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Z.I. de Pouldavid, 29100 Douarnenez, France

Call

Details about the offer

Listing ID:: A190-00241

Update:: 23.04.2025

Description

High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1

Rigid S355 steel frame
Workbench structure and Ram manufactured from laminated S355 steel
Symetric renforced Throats
Heavy grey cast iron slydways with automatic lubrication system
CNC Controller CYBELEC VisiPac 8 axis + 1
Bosch Rexroth servo valves
Inovance servo drive systems
DIEMA high resolution glass scales for high bending precision

Bending force 700T
Bending lenght 6500 mm
Distance between columns 5100 mm
Depth throat 420 mm
Ram stroke 400 mm
Closing Ram approach speed limited to 30 mm/s for human operation
Closing Ram working speed 7 mm/s
Return-speed 40 mm/s
Main hydraulic motor 45 kW
Machine weight 62,000 kg

8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast
3D graphical profile drawing (Touch Profile) and precise 2D program creation
The opening value can be setted individually in each sequence
Machine can be inferfaced with different CAM software
Easy single bends with the EasyBend page
Correction menu
Many languages available

Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard
Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security
All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded

4 Axis Back gauge adopts linear guides and Ballscrews
Back gauge travel X axis 1000 mm
2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2)
Automatic height adjustment (Axis R)

2 CNC Bending Followers 400 kg up to 60° angle
Motorised displacement of bending followers and parking area on the right of the bending table

Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system.

Safety Equipment :
3-position Foot switch with Emergency Stop Position
Closing approaching speed limited to 30 mm/s for human operation
Laser safety protection and permanent speed monitoring
Closing bending (working) speed 7 mm/s
Side covers with safety switch
Rear-protection with sliding door and safety switch
Low control Voltage (24V)
Safety control unit category IV

Standard configuration and equipment :
Electric control cabinet on left side
CNC user interface with Aluminium - arm
1 Line of punches (Upper tools) 85° R1, Height 200 mm
1 Line of centred lower Dies (to be defined)

Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE
Customisation available
CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard
Operation manual in English, German and French language
Bedpfx Ajwd I Svoizewr

Delivery and Services available worldwide
Customized Quotation
GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Seller

Registered since: 2011

2 listings online

Call

Send inquiry

Telephone & Fax

+33 2 98 ... show

These listings may also fit your interest.

Auction

Deephole boring machine BUCK TBFZ 1600 CNC

Hessen

7,848 km

Deephole boring machine
BUCKTBFZ 1600 CNC

€18,000

To the auction

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Bwjdjznkpvjpfx Aizor Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

See details

Listing

Robotized welding station Kawasaki / BEAR BEAR RT Kawasaki

Targowisko

8,491 km

Robotized welding station
Kawasaki / BEARBEAR RT Kawasaki

€68,000

Fixed price plus VAT

Call

Auction

Vertical machining center AXA VSC-3-3000-M

Nordrhein-Westfalen

7,718 km

Vertical machining center
AXAVSC-3-3000-M

€5,000

To the auction

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 420 mm Travel range Z-axis: 480 mm Bwedpfx Aiszncnqszor Table size: approx. 3,000 × 500 mm Spindle connection: SK40 Maximum speed: 6,000 rpm Tool changer: 22-position MACHINE DETAILS CNC control: Heidenhain TNC 407 EQUIPMENT Additional angular/universal milling head Coolant system Documentation/manual 4/5-axis machining: possible Machining of complex workpieces: possible

See details

Auction

Horizontal machining center HELLER MCH 250

Nordrhein-Westfalen

7,718 km

Horizontal machining center
HELLERMCH 250

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Bwsdpfx Aiezncnkezor Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

See details

Auction

5-axis horizontal machining center HELLER MCH 280 C

Nordrhein-Westfalen

7,718 km

5-axis horizontal machining center
HELLERMCH 280 C

€59,000

To the auction

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Bsdszncndspfx Aizswr Control system: Siemens 840D

See details

Auction

Laser cutting machine Prima Power CV 5000

Hessen

7,854 km

Laser cutting machine
Prima PowerCV 5000

€7,500

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Bwedpfxezncm Ho Aizjr Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

See details

Auction

Injection molding machine ENGEL ES 2050/400 HL

Hessen

7,865 km

Injection molding machine
ENGELES 2050/400 HL

€5,000

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Electro-hydraulic system Bwodpfezncmtjx Aizsr Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg

See details

Auction

Injection molding machine ENGEL DUO 3550/650

Hessen

7,865 km

Injection molding machine
ENGELDUO 3550/650

€29,500

To the auction

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g Bwedpjzncmaofx Aizsr MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

See details

Auction

Horizontal pressure beam saw HOLZ-HER Cut 6120

Baden-Württemberg

7,974 km

Horizontal pressure beam saw
HOLZ-HERCut 6120

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 417/1-505, functionality: fully functional, operating hours: 29,856 h, cutting height (max.): 80 mm, cutting width (max.): 3,100 mm, saw blade diameter: 350 mm, cutting length (max.): 4,200 mm, Equipment: scorer, The machine is still in operation and will be available starting October 9, 2026! TECHNICAL DETAILS Cutting length: 4,200 mm Cutting width (program slider travel): 3,100 mm Cutting height: 80 mm Saw blade overhang: 85 mm Min. clamping width: 0 mm Max. clamping width: 1,300 mm Saw units Main saw motor: 11 kW Main saw blade diameter: 350 mm Scoring saw motor: 1.5 kW Scoring saw blade diameter: 180 mm Motorized groove cutting device: 0–35 mm MACHINE DETAILS Software: Opti-Cut Display: 17″ TFT Control system: Opti-Cut Electrical data Operating voltage: 400 V (+10 % / -5 %) Mains frequency: 50 Hz Electrical connection rating: 20 kW Total weight: 6,200 kg Operating hours: 29,856 h EQUIPMENT Angle stop on the left 7 roller rails 8 clamping devices Clamping device opening: 82 mm First clamping device with double finger 4 air cushion tables 1 central blower Labeling package including label printer Bodpfx Aoznbkkeizswr Opti-Cut software installed Printing and clamping system Cutting height automation Pressure beam height control Angle and backstop device

See details

Auction

Machining center Weeke Optimat BHC 750 Swiss Profiline

Województwo wielkopolskie

8,115 km

Machining center
WeekeOptimat BHC 750 Swiss Profiline

€5,590

To the auction

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software Bwsdpfxeznbgrj Aizor FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

See details

Auction

Turning automatic lathe Citizen C32-VIII

Baden-Württemberg

7,939 km

Turning automatic lathe
CitizenC32-VIII

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning length: 320 mm Turning diameter: 32 mm Bodpfx Aiezlqdzezswr MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Parts conveyor belt

See details

Advertise here