Tool holder / tool holder

Year of construction: 2002, operating hours: 12,000 h, condition: ready for operation (used), functionality: fully functional, power: 382 kW (519.37 HP), transport height: 4,000 mm, MACHINE DETAILS Shreddable materials: metals, aluminium, plastic, wood, cars Transport height: 4,000 mm Power: 382.46 kW Operating hours: 12,000 h EQUIPMENT Pjdpox U S I Ajfx Aahogg Remote control Overband magnet Semi-trailer

Year of construction: 2003, operating hours: 10,600 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 6094, Equipment: centralized greasing system, Spare parts carrier! TECHNICAL DETAILS Coarse screen deck: 120/150 Fine screen deck: 10/25 MACHINE DETAILS Generator voltage: 400 V / 50 Hz Engine operating hours: approx. 10,600 h Pjdpjx Uwrgsfx Aahogg EQUIPMENT Trailer Hopper Magnetic drum medium fraction conveyor Magnetic drum oversize fraction conveyor Slip-on shoe Hydraulic rear support Direct connection Central lubrication Generator 50 mm towing eye Note: The engine starts but shuts down after a while, probably due to a fuel supply issue. The generator produces electricity. The machine is currently not roadworthy as it has been stationary for quite some time. Road registration is currently not possible.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 800457, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, The machine was completely overhauled in 2012. TECHNICAL DETAILS X-axis travel: 4,000 mm Y-axis travel: 3,400 mm Z-axis travel: 1,000 mm Column clearance: 2,000 mm Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size – longitudinal: 3,000 mm Table size – transverse: 1,500 mm Table load: 2 x 10 t C-axis swivel range: 0–360° (in 1° increments) A-axis swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS CNC control: Siemens 840D SL Axes: 5 controlled Total power requirement: 70 kVA Dimensions & Weight Space requirement: approx. 10,200 mm x 7,200 mm x 5,925 mm Machine weight: approx. 82 t Pedpfx Aasx Uwnbohjgg EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm Note: The machine has already been dismantled.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Pgsdpfx Aajx Updnshsg Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Total connected load: 100 kVA Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Auction of a fully demountable, multifunctional commercial hall! TECHNICAL DETAILS Dimensions Hall 1 Width: 22 m Length: 70 m Height: 6 m Dimensions Hall 2 Width: 23 m Length: 20 m Height: 6 m Roof insulation: EPS approx. 100 mm EQUIPMENT 3 gates & doors Walls: Internal casings filled with insulation sacks, cladded with steel trapezoidal profile sheets Steel trapezoidal profile sheet roof Secondary steel structure: steel frame and columns Purlins Pgodpfx Aaex T Dgzeheg Wind bracing for rigidity Note: Approximately 4 trucks are required for transport.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 33,749 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Pgodpjx Turbjfx Aahjg Z-axis: 115 mm Maximum workpiece weight: 1,700 kg Maximum speed: 140 m/min Controller: CNC Sinumerik 840D SL Positioning accuracy Positioning deviation Pa: 0.1 mm Average positioning accuracy Ps: 0.03 mm Laser data Maximum laser power: 4,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 10 mm MACHINE DETAILS Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,000 kg Total system power consumption: 11–65 kW Beam-on time: 19,152 h (28.08.2025) Laser-on time: 33,749 h (28.08.2025) EQUIPMENT - Automatic longitudinal pallet changer - Longitudinal chip conveyor - Oil vaporizer unit - PierceLine - FocusLine - NitroLine - PlasmaLine - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free radial turbine - High-frequency excitation - TASC laser control - Laser power control - Laser logbook - LensLine with status monitoring - Cutting head with 250 mm focal length - Quick-change cutting head unit (UTI) - ControlLine - Lens with RFID chip - ContourLine - Micro-welding - FastLine - AdjustLine - Internet remote services - FlyLine - Simple workshop programming

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 23,000 h, controller model: Siemens Sinumerik 840D SL, laser type: fiber laser, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, The machine was overhauled in 2025! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser type: Fiber laser Laser power: 5,000 W MACHINE DETAILS Control: Siemens Sinumerik 840D SL Year of last overhaul: 2025 Laser beam transmission: Fiber optic Machine chiller unit: Water-air Laser chiller unit: Air-water Operating hours: 23,000 h EQUIPMENT CE marking Nozzle changer Chiller unit Emergency stop switch Safety light barrier Dust extraction system Machine frame with integrated control cabinet Automatic longitudinal pallet changer Axis drive with linear motor technology and torque motor Integrated control cabinet lighting Central main switch Longitudinal chip conveyor Working area illumination Laser positioning diode Oil vaporization system PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Transport and positioning device Universal laser cutting head with adaptive lens system Single-head strategy Cutting head protective window Online monitoring of protective window ControlLine Automatic standstill Program-controlled cutting gas pressure regulation FastLine FlyLine AdjustLine Remote maintenance via internet Simple workshop programming Copper processing package Brass processing package Micro welding Multiple sheet processing Condition Guide USB interface RJ-45 network card Central connection Segmented extraction unit Compact dust collector Machine cabin with safety windows Electrically opening roof Commissioning Network configuration via remote maintenance Solid-state laser TruDisk 5001 (5 kW) with fiber output Pgsdpox Tuk Dofx Aaheg DetectLine Machine layout right-hand side Interface for LiftMaster Compact

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Pgjdpjx Tqg Usfx Aaheg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS Podsx Tqgbepfx Aahegg - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: HB32-287, TECHNICAL DETAILS Station 1: Sawing Station 2: Drilling Station 3V: Drill Station 3H: Drilling Station 4: CNC Station 5: CNC Station 6V: Thread cutting Station 6H: Drilling Station 7: Turning Station 8: CNC Facing Station 9: CNC Thread Cutting Station 10: Drill Station 11: Drilling Station 12: No Unit Station 13: CNC Station 14: 45° Milling Station 15: 45° Drilling Station 16: 45° Drilling MACHINE DETAILS Condition: Dismantled In storage since: August 2024 Connection rating: 400 V, 40 kW EQUIPMENT - Loading magazine - Knoll chip conveyor Pgsdex U Tgaopfx Aahjg - Knoll vacuum rotary filter VRF 500 - Machine is sold without the black platform