KM 125-620 C1

KraussMaffei

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI KM 1000-4300 MX Bodpfsz Eu Uuex Acfslp *General* Year of manufacture: 2008 Control: MC5 Clamping force: 11,000 kN Quick mould change: bolt holes *Clamping unit* Mould height min/max: 600 / 1,200 mm Platen size (H x V): 2,210 x 1,910 mm Tie bar distance (H x V): 1,550 x 1,250 mm Opening stroke: 2,000 mm Ejector stroke: 300 mm Locating ring FP/MP: Ø250 / Ø250 mm Max. mould weight FP/MP/total: 25 t / 25 t / 50 t *Injection unit 1 (main)* Screw diameter: 80 mm L/D ratio: 23 Shot volume: 1,810 cm³ Injection rate: 503 cm³/s Max. hydraulic pressure: 190 bar Max. injection pressure: 2,328 bar Screw stroke: 354 mm *Injection unit 2 (2K)* Screw diameter: 40 mm L/D ratio: 20 Shot volume: 204 cm³ Injection rate: 161 cm³/s Max. injection pressure: 1,860 bar Screw stroke: 160 mm *Peripherals* Core pulls FP/MP: 2 / 2 Sequential valve gate control: 16 zones Hot runner zones: 48

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 300-1400 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 300-1400 CX Year of Manufacture: 2019 Serial Number: 61032709 Machine Type: Hydraulic injection molding machine for plastics Clamping Force: 3000 kN / 300 tons Screw Diameter: 60 mm Control System: KraussMaffei MC6 Robot: KraussMaffei LRX100 Additional Equipment: Safety guard and conveyor Machine Description We offer a KraussMaffei KM 300-1400 CX injection molding machine, manufactured in 2019, with a clamping force of 3000 kN (300 tons), equipped with a KraussMaffei LRX100 linear robot, a safety guard, and a conveyor. The machine features a fully hydraulic clamping system and a modern KraussMaffei MC6 control system, based on an industrial PC with real-time Ethernet technology. The control system is equipped with an integrated 19-inch operator panel with a color touchscreen. The injection molding machine has a complete plasticizing unit for thermoplastics with a 60 mm diameter screw, a check valve, and an open nozzle. TECHNICAL DATA Clamping Unit Clamping Force: 3000 kN / 300 tons Mold Opening Force: 169 kN Platen Dimensions (H × V): 995 × 1050 mm Column Spacing (H × V): 630 × 630 mm Mold Opening Stroke: 820 mm Minimum Mold Height: 330 mm Maximum Distance Between Platens: 1150 mm Ejector Stroke: 200 mm Ejector Force (forward / backward): 58 / 28 kN Injection Unit Screw Diameter: 60 mm L/D Ratio: 20.8 Maximum Injection Pressure: 2006 bar Injection Volume: 679 cm³ Injection Weight: 618 g Injection Speed with Accumulator (option 70.25): 300 mm/s Volumetric Injection Capacity with Accumulator (option 70.25): 848 cm³/s Screw Speed: 260 rpm Nozzle Radius: 15 mm Nozzle Orifice Diameter: 6 mm Plasticizing Unit for Thermoplastics with Check Valve Electrical and Hydraulic Equipment Control System: KraussMaffei MC6 Operator Panel: 19-inch, color, touchscreen Rated Power of Pump Motor: 45 kW Installed Heating Power: 22.4 kW Dry Cycle Time / Stroke According to EUROMAP 6: 2.7 s / 441 mm Bljdpfx Ae Ahx A Ijcfep Hydraulic Oil Tank Capacity: 720 l Robot and Additional Equipment Linear Robot: KraussMaffei LRX100 Safety Guard Conveyor for Receiving and Transporting Molded Parts Dimensions and Weight Length: 6150 mm Width: 2170 mm Height: 2250 mm Net Machine Weight with Control Cabinet: 12,200 kg / 12.2 t

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 161-750 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 161-750 PX Year of manufacture: 2019 Machine type: Electric injection molding machine for plastics Clamping force: 1600 kN / 160 tons Screw diameter: 60 mm Injection unit: SP 750 Machine description We offer a KraussMaffei KM 161-750 PX injection molding machine, manufactured in 2019, with a clamping force of 1600 kN (160 tons), equipped with an SP 750 injection unit and a 60 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 1600 kN / 160 tons Mold opening force: 240 kN Column spacing (H × V): 585 × 535 mm Mold opening stroke: 450 mm Minimum mold height: 200 mm Maximum mold height: 500 mm Maximum distance between platens: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 33 / 16 kN Maximum mold weight: 2000 kg Injection unit SP 750 Screw diameter: 60 mm L/D ratio: 21.3 Maximum injection pressure: 1564 bar Injection volume: 475 cm³ Injection weight: 432 g Injection speed: 125 mm/s Volumetric injection rate: 297 cm³/s Screw speed: 458 rpm Installed heating power: 18.0 kW Nozzle pressure force: 42 kN Bledpfx Acs Ahxzfjfsp General data Drive power: 20.0 kW Dry cycle time / stroke according to EUROMAP 6: 1.9 s / 410 mm Oil tank capacity: 200 l Dimensions and weight Length: 6400 mm Width: 1990 mm Height: 2010 mm Machine weight: 10,200 kg / 10.2 t

Condition: as good as new (ex-display), Year of construction: 2021, KraussMaffei KM 160-750 PXA Injection Molding Machine Manufacturer: KraussMaffei Model: KM 160-750 PXA Year of Manufacture: 2021 Machine Type: Electric Injection Molding Machine Clamping Force: 1600 kN / 160 tons Screw Diameter: 50 mm Control System: KraussMaffei MC Agile Robot: KraussMaffei LRX Machine Description We offer a KraussMaffei KM 160-750 PXA injection molding machine, manufactured in 2021, with a clamping force of 1600 kN (160 tons), equipped with a KraussMaffei LRX linear robot. The machine features a 5-point, double-toggle clamping unit with a three-platen design, with servo-electric driven axes. The injection unit is equipped with electric drives responsible for injection, plasticizing, and the movement of the injection unit. The modern KraussMaffei MC Agile control system utilizes real-time Ethernet technology, enabling precise control of the production process. The machine is equipped with a complete plasticizing unit with a 50 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 1600 kN / 160 tons Mold Opening Force: 240 kN Clamping System: 5-point, double-toggle, three-platen design Clamping Drive: servo-electric Mounting Plate Dimensions (H × V): 770 × 720 mm Column Spacing (H × V): 570 × 520 mm Mold Opening Stroke: 450 mm Minimum Mold Height: 300 mm Maximum Mold Height: 600 mm Maximum Daylight Between Platens: 1050 mm Ejector Speed: 300 mm/s Injection Unit Screw Diameter: 50 mm L/D Ratio: 20.2 Maximum Injection Pressure: 1892 bar Injection Volume: 393 cm³ Injection Weight: 357 g Injection Speed: 200 mm/s Volumetric Injection Rate: 393 cm³/s Screw Speed: 267 rpm Plasticizing Rate: 36.5 g/s Nozzle Radius: 10 mm Nozzle Orifice Diameter: 4 mm Injection Drive: electric Plasticizing Drive: electric Injection Unit Movement Drive: electric Electrical Equipment Control System: KraussMaffei MC Agile Connected Power: 31.2 kW Installed Heating Power: 15.5 kW Number of Adjustable Cylinder Heating Zones: 5 Dry Cycle Time / Stroke according to EUROMAP 6: 1.86 s / 399 mm Linear Robot Manufacturer: KraussMaffei Bsdpfj Ahxyhsx Acfolp Series: LRX Type: Linear robot for injection molding machine service Application: Automation of part removal and handling Machine Dimensions and Weight Length: 5650 mm Width: 1820 mm Height: 1950 mm Net Weight: 8500 kg / 8.5 t

Condition: as good as new (ex-display), KraussMaffei KM 120-380 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 120-380 PX Year of Manufacture: 2023 Machine Type: Servo-electric injection molding machine with a servo-hydraulic system Clamping force: 1200 kN / 120 tons Screw diameter: 40 mm Control system: KraussMaffei MC6 Machine Description We offer a KraussMaffei KM 120-380 PX injection molding machine, manufactured in 2023, with a clamping force of 1200 kN (120 tons), equipped with a modern, 5-point, double-toggle clamping system with servo-electric drive. The machine features a servo-electric drive for injection and plasticizing, and a servo-hydraulic drive for the injection unit movement. It is equipped with an HPS-Mixing plasticizing unit with a 40 mm diameter screw, ensuring efficient plasticization and homogenization of the plastic. The KraussMaffei MC6 control system is based on an industrial computer with real-time Ethernet technology. TECHNICAL DATA Clamping Unit Clamping force: 1200 kN / 120 tons Mold opening force: 180 kN Clamping system: 5-point, double-toggle, 3-plate Clamping drive: servo-electric Mounting plate dimensions (H × V): 640 × 590 mm Column spacing (H × V): 470 × 420 mm Mold opening stroke: 400 mm Minimum mold height: 180 mm Maximum mold height: 550 mm Blsdo Ahxw Rjpfx Acfep Maximum distance between plates: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 22 / 10 kN Injection Unit Plasticizing system type: HPS-Mixing Screw diameter: 40 mm L/D ratio: 20.0 Maximum injection pressure: 1860 bar Injection volume: 201 cm³ Injection weight: 183 g Injection speed: 125 mm/s Volumetric injection rate: 157 cm³/s Screw speed: 334 rpm Plasticizing rate: 24.7 g/s Nozzle radius: 10 mm Nozzle orifice diameter: 4 mm Injection and plasticizing drive: servo-electric Electrical and Hydraulic Equipment Control system: KraussMaffei MC6 Connected power: 13.8 kW Electrical protection: 63 A Installed heating power: 11.5 kW Number of adjustable heating zones in the cylinder: 5 Dry cycle time / stroke according to EUROMAP 6: 1.5 s / 329 mm Oil tank capacity: 120 l Machine Weight Net weight: 6900 kg / 6.9 t

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 80-380 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 80-380 CX Year of manufacture: 2019 Machine type: Hydraulic injection molding machine for plastics Clamping force: 800 kN / 80 tons Screw diameter: 40 mm Injection unit: SP 380 Machine description We offer a KraussMaffei KM 80-380 CX injection molding machine, manufactured in 2019, with a clamping force of 800 kN (80 tons), equipped with an SP 380 injection unit and a 40 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 800 kN / 80 tons Mold opening force: 55 kN Column spacing (H × V): 420 × 420 mm Mold opening stroke: 500 mm Minimum mold height: 250 mm Maximum distance between platens: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 23 / 10 kN Maximum mold weight: 1000 kg Injection unit SP 380 Screw diameter: 40 mm L/D ratio: 20 Maximum injection pressure: 2101 bar Injection volume: 201 cm³ Injection weight: 183 g Injection speed: 100 mm/s Volumetric injection rate: 126 cm³/s Screw speed: 295 rpm Installed heating power: 10.9 kW Nozzle pressing force: 50 kN General data Pump drive power: 15 kW Dry cycle time / stroke according to EUROMAP 6: 1.7 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Length: 4090 mm Bljdpfx Aco Ahxv Eofjp Width: 1480 mm Height: 2020 mm Machine weight: approximately 3500 kg

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 50-180 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 50-180 CX Year of Manufacture: 2019 Machine Type: Hydraulic Injection Molding Machine Clamping Force: 500 kN / 50 tons Screw Diameter: 30 mm Machine Description We offer a KraussMaffei KM 50-180 CX injection molding machine, manufactured in 2023, with a clamping force of 500 kN (50 tons), equipped with an injection unit featuring a 30 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 500 kN / 50 tons Mold Opening Force: 40 kN Column Spacing (H × V): 370 × 370 mm Blsdpj Ahxuysfx Acfsp Mold Opening Stroke: 400 mm Minimum Mold Height: 200 mm Maximum Distance Between Platens: 600 mm Ejector Stroke: 100 mm Ejector Force (forward / backward): 23 / 10 kN Maximum Mold Weight: 630 kg Injection Unit Injection Unit Type: SP 180 Screw Diameter: 30 mm L/D Ratio: 23 Maximum Injection Pressure: 2025 bar Injection Volume: 85 cm³ Injection Weight: 77 g Injection Speed: 120 mm/s Volumetric Injection Rate: 85 cm³/s Screw Speed: 365 rpm Heating Power: 8.0 kW Nozzle Clamping Force: 50 kN General Data Pump Drive Power: 11 kW Dry Cycle Time / Stroke according to EUROMAP 6: 1.2 s / 259 mm Oil Tank Capacity: 180 l Dimensions and Weight Length: 3530 mm Width: 1410 mm Height: 1960 mm Machine Weight: approximately 2600 kg

Condition: as good as new (ex-display), Year of construction: 2023, KraussMaffei KM 50-100 PX Injection Molding Machine Year of Manufacture: 2023 Manufacturer: KraussMaffei Model: KM 50-100 PX Type: Electric injection molding machine with a servohydraulic system Clamping force: 500 kN / 50 tons Control system: KraussMaffei MC6 Screw diameter: 22 mm Machine Description We offer a KraussMaffei KM 50-100 PX injection molding machine with a clamping force of 500 kN (50 tons), equipped with a modern, 5-point, knee-joint clamping system with servoelectric drive. The machine features a servoelectric drive for injection and plasticizing, as well as a servohydraulic drive for the injection unit's movement. The KraussMaffei MC6 control system, based on an industrial computer with real-time Ethernet communication technology, ensures precise control of the injection molding process. TECHNICAL DATA Clamping Unit Clamping force: 500 kN (50 tons) Mold opening force: 75 kN Clamping system: 5-point, double knee-joint system, 3-plate Clamping drive: servoelectric Mounting plate dimensions (H × V): 490 × 440 mm Column spacing (H × V): 370 × 320 mm Mold opening stroke: 300 mm Minimum mold height: 150 mm Maximum mold height: 450 mm Maximum clearance between plates: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 17 / 8 kN Injection Unit Screw diameter: 22 mm L/D ratio: 22.7 Maximum injection pressure: 2500 bar Injection volume: 38 cm³ Injection weight: 35 g Injection speed: 125 mm/s Volumetric injection rate: 48 cm³/s Maximum screw speed: 382 rpm Plasticizing rate: 6.0 g/s Nozzle radius: 10 mm Nozzle orifice diameter: 4 mm Plasticizing system for thermoplastics Electrical and hydraulic equipment Bedpe Ahxtxefx Acfjlp Control system: KraussMaffei MC6 Connected power (according to specifications): 6.1 kW Electrical protection: 63 A Installed heating power: 6.3 kW Number of adjustable heating zones in the cylinder: 4 Dry cycle time / stroke according to EUROMAP 6: 1.1 s / 259 mm Oil tank capacity: 120 l Dimensions and weight Length: 4200 mm Width: 1440 mm Height: 1850 mm Machine weight: 4000 kg (4 tons)

Condition: excellent (used), Year of construction: 2011, KraussMaffei KM 500-4300 CX Manufacturer: KraussMaffei Model: KM 500-4300 CX ClassiX Year of manufacture: 2011 Operating hours: approx. 45,000 h Clamping force: 5,000 kN / 500 tons Bledpfx Ao Ahw Iqjcfsp Machine type: Hydraulic injection molding machine for processing thermoplastic materials Control system: KraussMaffei MC5 Clamping unit Mold clamping force: 5,000 kN (500 tons) Mold opening force: 279.9 kN Plate movement force – opening: 137.1 kN Plate movement force – closing: 116.8 kN Dimensions of mounting plates: 1,270 × 1,200 mm Distance between columns: 900 × 800 mm Mold opening stroke: 1,170 mm Minimum mold height: 480 mm Maximum daylight between plates: 1,650 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection unit Screw diameter: 100 mm Injection volume: 2,827 cm³ Maximum injection weight (PS): 2,573 g Injection pressure: 1,490 bar Screw speed: 195 / 270 rpm (standard / option) Plasticizing unit in an abrasion-resistant version Screw non-return valve Open nozzle Hydraulic and electrical system Fully hydraulic clamping system Rated power of the pump motor: 90 kW Installed heater power: 44 kW Number of heating zones in the cylinder: 7 Number of dry cycles according to EUROMAP 6: 1,050 cycles/h Capacity of the hydraulic oil tank: 1,175 l Control system KraussMaffei MC5 control system Color monitor Integrated operator panel 3 USB ports Dimensions and weight Length: 8,000 mm Width: 2,600 mm Height: 2,500 mm Machine weight with control cabinet: approx. 26,800 kg

Condition: good (used), Year of construction: 2013, clamping force: 13,000 kN, _KRAUSSMAFFEI KM 1300-8100 MX_ Year: 2012 Working hours: 52,000 h Clamping force: 1,300 tons (13,000 kN) Controller: MC5 _CLAMPING UNIT_ • Tie bar distance (H × V): 1,570 × 1,270 mm Bodo Agcuqopfx Acfslp • Platen dimensions: 2,210 × 1,910 mm • Opening stroke: 2,350 mm • Mould height min./max.: 700–1,400 mm • Max. daylight: 3,050 mm • Max. mould weight: 29,000 kg _INJECTION UNIT_ • Screw diameter: 95 mm • Shot volume: 3,721 cm³ • Shot weight (PS): 2,642 g • Injection pressure: 2,173 bar • Injection rate: 659 cm³/s • Plasticising capacity: 105 g/s _ADDITIONAL EQUIPMENT_ ✅ Sepro Robot 4050 S3 Trans ✅ 6× Hydraulic core pullers (3+3) ✅ 6× Hydraulic shut-off nozzles ✅ 16× Hot runner control zones ✅ 2× Air valves ✅ Euromap 67 robot interface ✅ Anti-vibration pads _DIMENSIONS & WEIGHT_ • Dimensions: approx. 13 × 4 × 3 m • Machine weight: 64,000 kg • Pump motor: 110 kW • Heating capacity: 59 kW