Injection molding machine

Krauss Maffei KM 80 C1

Year of construction: 1999, condition: excellent (used), injection molding machine krauss-maffai 150-700 c1 Lrsdpfx Ahsh S Dncswsh year 1999 Screw diameter 55 mm In top condition, still in operation

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Lreder Hrqrjpfx Ahweh Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: like new (used), Year of construction: 2017, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Lredpfx Ahsu Epy Nswjh Working hours: 12.500 h

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr Lrsdpfjp Audqox Ahwsh DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Pump motor 18.50 KW Weight 7,400 KG Lrjdevu Dncopfx Ahweh

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Type: Horizontal Drive: Hydraulic Lodpfx Aeva H Amshwjrh

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Ledpeuiykdjfx Ahwerh

Condition: like new (used), Year of construction: 2011, operating hours: 1,342 h, functionality: fully functional, clamping force: 150 kN, screw diameter: 16 mm, displacement volume: 10 cm³, total length: 25,000 mm, total width: 860 mm, overall weight: 1,700 kg, Type: NEX15-1E Year : 2011.09 Screw size: 16mm Max opening distance: 160mm Lredpetmtnlofx Ahwsh Max ejector travel: 50mm Min mold height: 130mm Max mold height: 260mm Distance between tie bars: 260*260mm Mold table size: 370*370 Mold ring size: 100mm Bulkhead volume: 10cm3 Shot weight: - Water battery: 6 channels Core pull: - Sockets for color dosers: - Interface: Euromap 67 Hot runner control: 4 zones Electrical outlets on machine: 2 x 32amp 3phase Machine consumption: Heater 3kw, motor 7,5kw

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details Ledpfx Asrxtpdjhwsrh CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Lsdpfx Ahov N D Raswerh Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.