Hydraulic mitre band saw machine

KASTO SBA 320/500U-DG

Condition: used, Year of construction: 1990, grinding length 1500 mm grinding width 550 mm workpiece height 400/450 mm table-size 1900 x 450 mm mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub Fedpfx Adjwlvirelsgc grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 15 kW voltage 380 V weight of the machine ca. 5 t Machine was reconditioned and modernized in 2015 with modern control. Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Year of construction: 1990, condition: used, x-travel 850 mm y-travel 1200 mm z-travel 600 mm total power requirement kW Fgedjt Hwqkopfx Adlsc weight of the machine ca. t dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm Fodjt Hwrnspfx Adlogc total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Condition: used, diameter 400 mm boring diameter / mm - / SMW-AUTOBLOK power chuck HFK 400 Diameter: 400mm Inner diameter: 100mm n-max: 2300 rpm Chuck width: 140mm Tube length: approx. 890mm Weight: 130kg max. operating force: 10000 daN Fgsdeidrkfspfx Adlsc

Condition: used, Technical details: cutting diameter: 460 mm saw band length: 4670 mm saw band width: 45 mm cutting range 90 degrees: round: 460 mm cutting range 90 degrees: square: 320 x 500 mm band speed: 16...160 m/min feed stepless: ja / jes / Sí mm/min electrical connection: 380 V / Hz. total power requirement: ca. 7,5 kW Fgodpfeu Niixsx Adlsc machine weight approx.: 2900 kg dimension machine xH: 2,8 x 2,45 x 1,7 m dimensions L x W x H: Rollenbahn: 1,1 x 0,6 x 0,3 m FULLY AUTOMATIC BANDSAW Manual and automatic operation Multiple stroke = single up to 580mm and multiple up to 5220mm Tension via clamping jaws WxH: 100 x 250mm motorized band tensioning Saw blade cooling piece counter Lubrication of the saw blade guide Accessories: Infeed track, motor-driven, LxW: 1300mm x 530mm Outfeed track LxW: approx. 1000mm x 750mm *

Condition: good (used), Year of construction: 1995, operating hours: 43,499 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of construction: 1995; Delivery year: 1998 Installation & Commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer Specifications / History Previous owner (1999–2022): German aerospace group Technical Specifications Travel Distances & Working Area X-axis (longitudinal table travel): 4,000 mm Y-axis (cross-slide traverse): 2,500 mm Z-axis (vertical ram travel): 1,000 mm Clearance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverses X/Y/Z: Feed 0–6,000 mm/min, rapid traverse 15,000 mm/min B-axis nutator: 0–3,600 deg/min C-axis nutator: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing control: max. 4,000 Nm Speed range Stage I: 20–875 rpm Stage II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool diameter: 315 mm Tool diameter at full occupancy: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Distances Vertical spindle unit: Spindle nose – table surface 250–1,250 mm Horizontal spindle unit: Spindle center – table surface 150–1,150 mm Nutator (MC303): Spindle center – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Special Features & Accessories Fully automatic tool changer (ATC): 120 stations (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Toolbox + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with carriage: 3,500 x 2,300 x H 2,670 mm Tool changer without carriage: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Fgodpfxex Hxdzj Adloc Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Carriage with RAM: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool case: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis portal milling machine is ideally suited for machining steel, cast iron and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 stations), fully automatic head changer, and high-precision B/C axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Condition: used, Technical details: weight: 150 kg Fgodpfxsu N E Aze Adlec dimensions: L:280 x B:240 x H:180 / pro Pratze mm These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping stroke 250mm Foot mounting: Surface L x W: 280 x 240mm, 4x clamping screw M24 Equipment 4x slotted screw per clamping claw and socket spanner for square 24mm *

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Fgodpfsx Dkggex Adlsc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Steel holder inserts Fgodpfevmf Axjx Adlec Make Stanko/Sedin Data, see pictures

Condition: ready for operation (used), Year of construction: 1980, machine/vehicle number: 5780515, functionality: fully functional, Metora VMB280 hacksaw with automatic feed • Cutting capacity: up to 280 mm • Cutting angle: 90° and adjustable up to 45° • Automatic feed: adjustable, hydraulic feed for consistent cutting quality Fedpfsxxxubsx Adljgc • Motor power: 1.5 kW • Cutting speed: 20 - 100 m/min (steplessly adjustable) • Weight: approx. 800 kg • Includes roller conveyor for 3 meters • Saw blade installed