Band Saw - Automatic - Horizontal

KASTO PBA 320/460 AU

Condition: used, Technical details: cutting diameter: 460 mm saw band length: 4670 mm saw band width: 45 mm cutting range 90 degrees: round: 460 mm cutting range 90 degrees: square: 320 x 500 mm band speed: 16...160 m/min feed stepless: ja / jes / Sí mm/min electrical connection: 380 V / Hz. total power requirement: ca. 7,5 kW machine weight approx.: 2900 kg dimension machine xH: 2,8 x 2,45 x 1,7 m dimensions L x W x H: Rollenbahn: 1,1 x 0,6 x 0,3 m FULLY AUTOMATIC BANDSAW Manual and automatic operation Multiple stroke = single up to 580mm and multiple up to 5220mm Tension via clamping jaws WxH: 100 x 250mm motorized band tensioning Ksdpfx Acsu Niixohslw Saw blade cooling piece counter Lubrication of the saw blade guide Accessories: Infeed track, motor-driven, LxW: 1300mm x 530mm Outfeed track LxW: approx. 1000mm x 750mm *

Year of construction: 1990, condition: used, x-travel 850 mm Kledpfx Acjt Hwqkshew y-travel 1200 mm z-travel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Maximum diameter 3800 mm Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Klsdpfsxta E Rex Achjw

Condition: used, diameter 400 mm boring diameter / mm - / Kjdpeidrkfefx Achelw SMW-AUTOBLOK power chuck HFK 400 Diameter: 400mm Inner diameter: 100mm n-max: 2300 rpm Chuck width: 140mm Tube length: approx. 890mm Weight: 130kg max. operating force: 10000 daN

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Kjdpfxoxph E Rs Achelw Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: good (used), Year of construction: 1995, operating hours: 43,499 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of construction: 1995; Delivery year: 1998 Installation & Commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer Specifications / History Previous owner (1999–2022): German aerospace group Technical Specifications Travel Distances & Working Area X-axis (longitudinal table travel): 4,000 mm Y-axis (cross-slide traverse): 2,500 mm Z-axis (vertical ram travel): 1,000 mm Clearance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverses X/Y/Z: Feed 0–6,000 mm/min, rapid traverse 15,000 mm/min B-axis nutator: 0–3,600 deg/min C-axis nutator: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing control: max. 4,000 Nm Speed range Stage I: 20–875 rpm Stage II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool diameter: 315 mm Tool diameter at full occupancy: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Distances Vertical spindle unit: Spindle nose – table surface 250–1,250 mm Horizontal spindle unit: Spindle center – table surface 150–1,150 mm Nutator (MC303): Spindle center – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Kodpfxox Hxdzo Acholw Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Special Features & Accessories Fully automatic tool changer (ATC): 120 stations (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Toolbox + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with carriage: 3,500 x 2,300 x H 2,670 mm Tool changer without carriage: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Carriage with RAM: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool case: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis portal milling machine is ideally suited for machining steel, cast iron and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 stations), fully automatic head changer, and high-precision B/C axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Year of construction: 2013, condition: ready for operation (used), A Rösler continuous belt shot blasting system is available. Rated power: 72kW, abrasive filling quantity: 1500kg, blasting capacity: 600kg/min, blast wheels: 4, blast wheel type: H28HM, total system dimensions X/Y/Z: approx. 12400mm/3800mm/2300mm, max. single component weight: 6000kg. Documentation available. An on-site inspection is possible. Kljdpfx Asyi E Epschew

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Klodpfx Aexrtqwochow Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Kjdpox Sx D Ssfx Acholw Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical details: weight: 150 kg dimensions: L:280 x B:240 x H:180 / pro Pratze mm These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping stroke 250mm Foot mounting: Surface L x W: 280 x 240mm, 4x clamping screw M24 Equipment 4x slotted screw per clamping claw and socket spanner for square 24mm Kodpfxsu N E Azs Achslw *