Cold saw

Kaltenbach KKS400

Condition: good (used), Year of construction: 1992, Used circular saw from Kaltenbach Type: KKS 400 EC-H Capacity: ø400mm Includes a 6-meter infeed and outfeed roller conveyor with an analog measuring system. Pedpfx Apsz Hbhkspjgt

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Pjdpfx Aoyfgrpeppjgt Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: ready for operation (used), Year of construction: 2007, total width: 1,070 mm, total height: 1,780 mm, overall weight: 820 kg, product length (max.): 800 mm, Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details. • Saw blade diameter: 400 mm • Saw blade types: HSS solid steel, HSS segmental • Saw blade mounting: DIN 8576 • Centering bore: 50 mm • Number of carrier bolts: 4 pcs • Bolt circle diameter: 80 mm • Diameter of carrier bolts: 13 mm • Feed speed rate: 0–1000 mm/min (infinitely variable) • Quick return: 1550 mm/min • Rotary table adjustment: Manual, +/- 90° • Cutting speed (with 400 mm blade): 10/20, 13/26, or 15/30 m/min • Electric power equipment: 1.7 / 2.6 kW • Operating voltage: 3x 400V / 50Hz • Control voltage: 24V DC • Total current: 9 A • Main fuse: 16 A Pgodpfjy D Srmox Appot Additional equipment • Length stop T3/L 41 NC, 6 meters (Year 2013)

Condition: ready for operation (used), functionality: fully functional, Sawing machine Kaltenbach KKS-400M saw blade diameter: 400 mm motor power: 1.8/2.7 kW sawing speed: 10/20 13/26 15/30 m/min feed rate: 0 - 1,000 mm/min Pjdpfxjz Ayhdj Appjgt rapid traverse forward/backward: 1,550 mm/min maximum working range: 130 mm working range for square material: 120 mm working range for flat material: 305 x 20 mm working range for round material: 130 mm minimum working range: 10 x 10 mm mitre range: 0° - 90° - 0° dimensions (L x W x H): 1,080 x 900 x 1,760 mm weight: 850 kg

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Pgodpfx Ajkfp D Tsppst Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: used, Length of infeed table: 6000mm, length of outfeed table: 4150mm, length: 2340mm, width: 1220mm, height: 1780mm, with saw blades as accessories and documentation, was not regularly maintained, without maintenance reports, no known defects. Pgjdpfxez D S Dws Appet

Condition: good (used), Year of construction: 1993, Used circular saw machine from Kaltenbach Pgsdpfxjzz Rahs Appet Type KKS 400 EC Year of manufacture 1993

Condition: new, Year of construction: 2023, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil / diesel / HVO100. Color: RAL 7035 Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate / type plate according to EN 12285-2, Ü marking Tank suitable for above-ground installation outside earthquake / flood zones. Equipment/fittings: Manway 600 mm with manway cover, screws, and gasket 1.1 Equipment/fittings: Manway 500 mm with manway cover and gasket 1 -Filling pipe 2” with TW closure (filling cap) (from 20 m³ = 3”) -Suction pipe 1 ¼” -Dipstick and dipstick closure - Tank content indicator -Vent pipe with cap 1 ½” -Limit switch with type approval -Leak detection device (optical) = LAS with leak detection fluid -Access ladder with platform for side mounting, supplied separately Sincerely, Psdpfx Apeh Ukupopjgt from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Condition: used, Year of construction: 2000, machine/vehicle number: 121528, Item No. 26301 Technical specifications: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° up to round 130 mm - square 120 mm - flat 305 x 40 mm Pgjdjzzpliopfx Appet - or 240 x 85 mm - mitre adjustable, left + right 0 - 90° - at 45° up to round 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Saw blade feed speed - steplessly adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydraulic material clamping device with hand crank for fine adjustment - Steplessly adjustable clamping pressure - 2 hydraulic backstops - Micro-spray coolant system - Original outfeed roller conveyor with stop 4000 mm - Infeed roller conveyor 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

Condition: refurbished (used), Kaltenbach circular saw completely overhauled. TECHNICAL DESCRIPTION KKS 400 KKS 400 Semi-automatic, hydraulic universal circular saw with rotary table for miter cuts SAW BLADE Segment saw blade Saw blade holder according to DIN 8576 ☒ 400 x 4 ☐ 450 x4 mm 50/4x14/80 mm WORKING AREA Round material 90/45° 125 150 mm Square material 90° 115 140 mm 45° 110 130 mm Flat material 90° 305 x 40 330 x 40 mm 45° 235 x 30 250 x 40 mm U-profiles standing 90/45° 120 x 55 140 x 60 mm lying 90° 240 x 85 280 x 95 mm 45° 180 x 70 220 x 80 mm Podpfx Aovn Ic Reppjgt Cutting lengths from 10 mm DRIVE POWER Saw motor 1.8/2.7 kW Hydraulics 1.5 kW Coolant pump 0.1 KW CUTTING SPEEDS (standard) 11.5/23 13/26 m/min or 10/20 11/22 m/min or 13/26 15/30 m/min SAW BLADE FEED continuously adjustable according to table 0 - 1,000 mm/min Saw blade rapid return 3,300 mm/min ELECTRICAL CONNECTION TN-S system - 3 phases, neutral conductor, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 820 kg

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg Psdjf Dwa Ujpfx Appegt +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1998, condition: ready for operation (used), Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible. Pgjdpfx Apsyln A Nepst

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Pedpfx Apswp Ipxepjgt

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Psdewwvwyepfx Appegt

Condition: reconditioned (used), Year of construction: 2010, For sale: a Kaltenbach cold-cutting circular saw. Gearbox with no backlash! Type: KKS 400 E Year of manufacture: 2010 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Pgjdpfx Apjzrncujpet Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch Shipping possible upon request. Forklift available for loading.