Oven - Gas

IVA INDUSTRIEOEFEN IVA 844 060/4

Condition: used, Year of construction: 2009, operating hours: 20,536 h, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, empty load weight: 16,000 kg, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Nwedpfx Aaou Thyps Rsp Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine is currently in our workshop undergoing partial refurbishment. We expect the refurbishment work on the machine to be completed by the end of October, after which the machine will be tested and released for sale.

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Nedpfxjua E H Sj Aa Rjwp - Suitable for single wall pipes up to 220mm

Year of construction: 2010, condition: like new (used), BATTENFELD PE PIPE HEAD RK 315 helix, screen basket with tool 315 PE Little used smokes Condition: As good as new The pipe head is my property Nwjdjhy Aq Iepfx Aa Rop Sachal extrusion machines Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: good (used), For sale - injection molding machine, aggregate, machine for the production of EPS polystyrene shapes - thermoboxes, fishboxes - used, very good condition. The machine is currently still connected to the installation, which will make it easier for the buyer to dismantle and mark individual connections - Complete machine, ready to be connected to a steam installation, transport of EPS granulate, electricity, compressed air, cooling system. - Year of production 2023 - configurable mold for the production of polystyrene thermoboxes, fishboxes, 3 sizes, with or without holes, with a lid - a total of 6 configurations - complete boxes with lids are produced in one cycle - no need to change molds. - the set includes the rights to the design of boxes, fishboxes - documentation, ATTENTION! the machine can produce EPS building shapes for walls, ceilings !! - examples in one of the photos. We have other elements of the production line, check our ads. We also have other elements/devices for sale, such as: - injection molding machine, aggregate, machine for the production of EPS polystyrene foundation plates + plate mold - Certus container steam boiler room (oil steam generator) - EPS foamer - steam installation: boiler room - machines - 3m3 steam tank - installation for transporting foamed EPS - EPS silos - polystyrene crusher Nsdpfsua Dqijx Aa Rewp - many spare parts Possibility to send more photos and information by email. Possibility to sell individual components of the set separately.

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control Nwodpfx Aouhpiyoa Rsp - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Year of construction: 2006, condition: as good as new (ex-display), Only been used for a short time in the technical center, therefore in very good condition. Nwedsl Slv Tjpfx Aa Rep We are always available for further questions.

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control Nedpfewaxuajx Aa Rewp • Output on PVC around 700 kg/hour

Condition: new, Cylinder, packed in wooden box, cylinder with ceramic heaters for 90mm extruder grooved feed Nwedpfxoua Ti Is Aa Rep

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF RA 110 3+3 E 6 CATERPILLAR Njdpsp Analsfx Aa Rewp Year of construction: 2003 Caterpillars: 6 Diameter: Min 20mm Max 170mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Year of construction: 2004, condition: excellent (used), KUAG CUT 110 PIPE SAW for PP, PE or PVC PIPES With central pipe fixation Cutting speed 20 m/min. Cutting length min. 20 cm Cutting and chamfering Cutting with a cutting roller/pizza knife or a chisel and grip steel Year of construction: 2004 Condition: very good Hablamos espanol Nous parlons français Nwjdpfeffp S Hsx Aa Rsp We speak English Hablamos español Nous parlons français We speak English