Tempering Furnace

IPSEN DAQ 7-8

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! Gsdpeq R N Tqjfx Aqxoub also available as Craneset

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic - Ram stroke: 850 mm - Number of blows per minute: 100 - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Godpfx Aqjw Sdxaexeub Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm - Total machine height: 4380 mm - Total weight: 35 t

Condition: good (used), Year of construction: 1987, functionality: fully functional, center width: 825 mm, center height: 350 mm, spindle motor power: 7,500 W, total length: 2,800 mm, spindle speed (min.): 300 rpm, spindle speed (max.): 2,500 rpm, quill diameter: 60 mm, quill stroke: 500 mm, total height: 2,200 mm, total width: 2,000 mm, overall weight: 3,500 kg, product height (max.): 3 mm, feed force X-axis: 2,800 N, feed force Z-axis: 2,800 N, feed length X-axis: 250 mm, feed length Z-axis: 450 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, The machine is located in our warehouse. It is connected and can be tested at any time. Godpfsxfiq Hex Aqxjub

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Gusdpfowmfyvjx Aqxob Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: used, Complete Heat Treatmet House for Sale The Line includes ; (All modernised at 2023) Gujdpfsw Dhuqox Aqxsb 1. 1 ea AKF1 IPSEN TQF 4 EM 1977 Athmosphere Controlled Furnace 2. 1 ea AKF2 IPSEN TQFRA 5 EM 1991 Athmosphere Controlled Furnace 3. 1 ea AKF3 IPSEN T4 EM 1972 Athmosphere Controlled Furnace 4. 1 ea AKF4 IPSEN TU-5 EM 1970 Athmosphere Controlled Furnace 5. 1 ea HSH 2011 Stress Releiving, Bright Annealing 6. 1 ea Ipsen Dac 5 ER 2011 Nitration, stress releiving 7. 1 ea Ipsen DAC 4 1980 Stress Releiving, Bright Annealing 8. 1 ea HSH 2007 Stress Releiving, Bright Annealing 9. 1 ea BOREL 1987 Pit Type Stress Releiving 10. 2 ea Ipsen 1972 model Stress Releiving 11. 1 ea Loading Car 12. 1 ea Unloading Car All furnaces has already beed dismantled and ready for shiping.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: xxxxx, Washing machine Manufacturer: CIEFFE Type: WCR 8/X/"/VAP/US/G-R Year of construction: 2007 Heating: 120kW gas Evaporator vacuum boiler, ultrasonic, dryer, compact de-oiler, level controller Cleaner tank 4500 ltr. Guedpfsqtyxkjx Aqxjb Flood tank 4500 Ltd.

Condition: excellent (used), Year of construction: 1982, total height: 5,600 mm, pressing force: 400 t, air pressure: 6 bar, distance between side stands: 650 mm, distance between stands: 1,600 mm, stroke length: 280 mm, table length: 1,600 mm, table width: 1,120 mm, Trimming press in working condition: Nominal force: 400 ton Stroke: 280 mm Number of strokes per minute: 36 1/min Table size: 1 600 x 1 120 mm Slide size: 1 435 x 960 mm Main electric motor: 37 kW Overall dimensions: - Length: 3 010 mm Gjdpfsubyrxex Aqxjub - Width: 2 135 mm - Height: 5 600 mm Total weight: 50 000 kg.

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Gedpfx Aoxz Divsqxjub

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 The hammer is similar to Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke – 10,000 kgm; - Ram weight – 3,150 kg; - Mode of operation – pneumatic; - Ram stroke – 900 mm; - Number of blows per minute – 90; - Working pressure – 5 – 7 bar; Gsdpjw Sdwvofx Aqxjub - Anvil weight – 63 t - Total weight – 100 t.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, overall weight: 5,000 kg, We are offering this refurbished metal spinning machine UD320 CNC-Fanuc, fully overhauled in 2025. This is a metal spinning machine that has been completely refurbished by us and equipped with a new, modern Fanuc CNC control system. We currently own a total of 9 of these machines. Five of these machines have already undergone a retrofit with the Fanuc control unit. The overhaul of other components such as bearings, guides, and slideways is carried out either in-house or through external contractors. We are very familiar with these machines. The hydraulic unit has been custom-built to our specifications. If you have any questions or need more information, please feel free to send us a message or call us. Gedpfxsykmmko Aqxjub