Machining center

HOMAG BAZ 211/40/K

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Kdedpsxtbf Eefx Achep Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding wheel diameter: 500 mm, total width: 2,300 mm, total length: 6,730 mm, total height: 1,800 mm, grinding diameter: 320 mm, workpiece weight between centers: 250 g, grinding wheel width: 80 mm, spindle speed (max.): 1,800 rpm, feed length X-axis: 350 mm, feed length Z-axis: 1,550 mm, Good morning, We have to offer a six months old CNC SWG32 x 1500 CNC machine with SIEMENS SINUMERIC 828D sL control (after a complete revitalization of TOS HOSTIVAR BUB32 machine) The machine is still in Lease at ING Lease. The machine has already been partially repaid, our company does not want to recover the repaid installments. The assignment of the lease applies only to the remaining installments to be repaid (the cost of the assignment is borne by our company). For more technical and financial details, I invite you to contact me at the e-mail address or by phone Specification of the machine: - Year of manufacture:2024 - Maximum grinding diameter: 320 - Maximum grinding length: 1500 - Supply voltage: 3 x 400V - Control voltage: 24V - DC - Metric system Kdodpfx Asvkc D Ischsp - Maximum permissible weight of objects clamped in the canine: 250 kg - Total travel distance in the X axis: 350mm - Rotation of the grinding wheel spindle: 50 - 1500 rpm (7.5kW) - Plunge grinding infeed speed range 0.03 to 20mm/min - Wheel diameter: 500mm - Morse taper 5 - Measuring probe to determine the workpiece - Workpiece support - Electronic wheel (handheld panel)

Condition: repair required (used), Year of construction: 2003, Rubber injection molding machine, REP brand 25 tons Year: 2003 Kjdpfxjizi H Ho Achedp All four columns need to be replaced (estimated cost: €9,000).

Condition: like new (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, from company closure as good as new Pinacho STS18-180 lathe with Fagor control and revolver Year of construction 2020 Turning hours 400 Kodpfx Acjwdhn Rshsdp Turning diameter above bed 360 mm Turning diameter above slide 190 mm Center length 1000 mm Turning length 840 mm Spindel through 42 mm Weight 2500 kg equipped with 3-jaw chuck, 8-fold revolver, Fagor control price excluding VAT, loaded on truck

Condition: like new (used), Year of construction: 2022, functionality: fully functional, TM-California-4: 4-Axis CNC Machining Center Type California/4-4 • CNC machining machine suitable for aluminium profiles • Automatic opening and closing of the safety cover • Spindle movement via linear guides and servo motor • Equipped with ISO 30 spindle • Power 7.5 kW and speed 24,000 rpm • Electrically rotatable spindle from 0° to 180° • Pneumatic profile stop on both left and right sides • 6 pneumatic profile clamps • The profile clamps are manually positioned as standard • Tool magazine on the right with 6 slots + disc cutter • Automatic tool changing • Automatic cutter length measuring system • Automatic cooling mist with micro-dosing system • Industrial PC and remote service system • 21.5" PC with Windows 10 operating system • Includes Uni-Link CADCAM software with Uni-Link On Board • User-friendly interface for operation and visualisation Kdjdpfx Ajx Hd Hzjchsp • Machining length: 4,200 mm • Machinable profile cross-section: 230 x 230 mm • Accuracy: 0.1 mm/m

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, We are offering this Mazak INTEGREX i500V CNC turning and milling machining center, in very good condition, year of manufacture 2014. Manufacturer: Mazak Model: INTEGREX i500V Year of manufacture: 2014 Condition: very good If you have any questions or need more information, please feel free to send us a message or call us. Kodsyymrmepfx Achodp

Condition: used, Year of construction: 2022, We are selling a CNC drilling center, SCM Morbidelli CX100, model year 2022, in excellent condition. This machine is designed for fast and precise processing of furniture components and is ideal for the production of cabinet furniture, kitchens, wardrobes, and other components made of chipboard or MDF. Key Data Manufacturer: SCM Group Kdedpfjy S U Dusx Achjp Model: Morbidelli CX100 Type: FO03 Year of Manufacture: 2022 Serial Number: AB00021843 Power Supply: 400 V / 3~ / 50 Hz Connected Load: 29 A Machine Weight: 1309 kg Made in Italy Machine Advantages High drilling speed and accuracy CNC control for efficient series production Compact design with a small footprint Suitable for modern furniture production Reliable Italian SCM manufacturing Condition The machine is regularly serviced and well-maintained. Inspection and operational testing are possible. For more information, technical specifications, or a quote, please contact us.

Condition: new, Year of construction: 2023,

Condition: good (used), Crystallizer for PET recycling Year: 2008 Ksdpfx Asnxkd Ischedp

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control Kdedpfxeytcl Is Achep - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets