Cnc-processing center

Holzfraese Axolox 2513

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Dcjdexc Rmqepfx Abbsg Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2024, New demonstration machine!! List price: €52,742 (net). Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board and base frame with adjustable machine feet. Milling bed with 19mm MDF sacrificial board. Table openings pre-configured longitudinally and transversely. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision racks. All elements assembled, pre-lubricated, including test run, ready to use immediately. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply, and toroidal transformer, fully pre-mounted in the control cabinet, including sensors for each axis. Switching relays for automatic operation of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices provided by a moving extraction device and a laser scanner mounted on one side for working area monitoring, with a 275° and 5.5m field range (machine positioned in a corner of the room). Handheld control unit with all necessary machine operation functions, including emergency stop button and dead man's switch. Tool length sensor to determine tool length and active zero point offset. High-frequency spindle with 2.2 kW, including collet nut, frequency converter, line filter, braking resistor, and collet set. Monitor as a built-in monitor, including mini PC with Windows 10, pre-installed with Beamicon2 control software, as well as mouse and keyboard, integrated in an ergonomic desk. CAD license Rhino 7.0 and CAM license Estlcam V11, as well as all necessary documentation, will be sent by email prior to delivery. Vacuum table: Milling bed designed as a vacuum table, consisting of four adjustable segments. Cross table made of PE with a top plate of ... vacuum pump from Becker company with a capacity of 100 m³/hour, oil-lubricated. For connecting the vacuum pump, a 16 Ampere, 400 V AC plug is required. The customer must supply HDF 3mm double-sided raw board (2500x1300mm) as sacrificial plate for the entire vacuum table (recommended use: processing coated wood-based materials). Tool set in systainer: Tool set in systainer consisting of: - 1 pc. 1.5mm left (HF152LIVHM) - 1 pc. 3.175mm 30° (HF30GVHM) - 1 pc. 6mm 90° (HF90GVHM) - 5 pcs. 4mm Z2 (HF41REVHM) - 1 pc. 5mm Z2 (HF52REVHM) - 1 pc. 5mm Z3 (HF53SRECAR) - 2 pcs. 5mm Z2 (HF52REDIA) - 1 pc. 5mm Z2 (HF52UPDOWN) - 1 pc. 4mm Z3 (HF43REVHM) - 1 pc. 6mm Z1 (HF61REVHM) - 1 pc. 8mm Z2 (HF82LAVHM) - 1 pc. 10mm Z2 (HF10SVHM) Dcjdpew Tfy Uefx Abbeg - 1 pc. 12mm Z2 (HF12SVHM) Maintenance package in systainer: grease gun 150 ml, one cartridge of high-performance grease 400 g, spray can of silicone spray grease 500 ml, one grease fitting with hose section and 30mm face milling cutter with indexable inserts. Pneumatic unit: consisting of four cylinders, throttling check valve, push-in fittings, angle push-in fittings, silencer connectors, filter regulator, push-in manifold, PE hose, and brackets, for use in a pre-configured table opening (for end-face machining). If pneumatics are required for both table openings, the position must be calculated twice (NOTE: Compressor to be provided by customer.) Technical data: Travel (X / Y) 2500 x 1300 mm, Z = 200 mm Dimensions (L / W) 1980 mm, 3800 x 2300 mm, H = 1900 mm Footprint: approx. 20 m² (smallest installation size) Weight: 1500 kg Rated voltage: 400 V Repeat accuracy: +/- 0.1 mm Connection values: 4.3 kW HF spindle