Edge banding machine

Holz Her Uno 1302

Condition: excellent (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, Holzher Uno 1302 , Year 2012 , Flat scrapers , Kfedpfx Afoxz Icgo Soa Fully functional , Can be tested ,

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Kfjdsw Igg Sepfx Af Soa Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Kedpfxsxrr Uzs Af Ssfa Available from stock in Lieboch

Condition: used, Compact Hebrock EURO 3001 edge banding machine for precise edge banding of panel material. The machine enables clean edge processing thanks to automatic glue application, pressure rollers, and finishing units. Ideal for furniture and interior design. Technical specifications subject to change. Unit 1: Glue application Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm Kedpfoxdc D Rox Af Sefa edge thickness: max. approx. 12 mm feed rate: approx. 10 m/min

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm Kfjdpewka S Isfx Af Sja - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and technical specifications: Factory-refurbished by Lange Maschinenbau Minimum workpiece width: approx. 75 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: approx. 120 mm / 180 mm for corner copying Edge thickness: 0.4 - 2 mm Jointing unit shaving removal: 0 - 2.0 mm, infinitely adjustable Jointing unit with 2 counter-rotating, application-controlled jointing motors Diamond tooling height = 55 mm Direct glue application to the workpiece Glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit End trimming unit with high-frequency motor, 2 saw blades and high-precision linear guides Combined milling station for radius and bevel milling Corner copying unit Flush trimming unit Ksdpfx Aew Sbbljf Sefa Extraction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Dimensions: 320x110x200 Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Kfsdpfx Afjw Rtade Soa Availability: Approx. December 2025

Condition: excellent (used), Edge banding machine Artech Akron 420 Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing trim saws, Milling units R1, R2, Kjdpexw Uzzofx Af Sofa Profile scraper, Condition: very good

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Kedpfovvkfqsx Af Sjfa