Tilting spindle moulder

hofmann

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. Ksdpfozvdk Aex Afqedr The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Kdodpfx Aoxpi Dujfqer 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: used, Reading type / 0 Kodpfx Ajy Sur Eefqsdr weight - pallet system / kg length / mm

Condition: excellent (used), Year of construction: 1995, Combined planer and thicknesser from Hofmann, featuring the legendary Leitz-Wigo spiral cutterhead, with a very robust design in a compact format. A special feature of this machine: the planing table does not need to be folded up for thicknessing, so no conversion is necessary. Equipped with a "genuine" spiral cutterhead. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment via handwheel Ribbed steel infeed roller Rubber-coated outfeed roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife cutterhead with spiral, re-sharpenable HSS knives Two sets of spiral knives are included, each installed in matching pressure blocks. Re-sharpening is done by a sharpening service, and the sharpened knife sets can then be easily screwed into the cutterhead without any adjustment work. Slotted table lips Cutterhead guard Suvamatic Fence swivels with guide rail Concave/convex edge setting of the planing table Rod for hanging the dust extraction hood Dust extraction port 2 x 160mm Kdodpeztkyxjfx Afqor Only a few spots have been touched up V-belt renewed Knives sharpened Rubber outfeed roller renewed Operating manual CE marking No scratches on the tables. Thickness table with two adjustable table slide rollers Dimensions approx. 2520 x 1200 x 1200mm (L x W x H). Weight approx. 1300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M Kedpjzd Tavofx Afqjdr

Condition: used, Year of construction: 1992, functionality: fully functional, overall weight: 1,000 kg, Hofmann surface planer, 305 x 41 cm Planer width 41 cm Kdsdsztz Exopfx Afqer Year of manufacture 1992 305 cm planer table length Planer fence, adjustable from 90 to 45 degrees 4 kW motor with brake 2 cutterblocks with wedges Resharpenable planer blades Includes 4 spare planer blades, 410 mm Maximum chip removal 10 mm Adjustment for rabbet and chamfer joints Dust extraction connection 140 mm Weight 1000 kg

Condition: excellent (used), Year of construction: 2023, Swivel spindle milling machine Manufacturer: Hofmann Type: TFS 107 Year of manufacture: 2023 Swivel range: -45.5° to +45.5° Table: 2,000 x 813 mm Table height: 890 mm Power: 7.5 kW Speed: 1,500 - 10,000 rpm, stepless speed adjustment Spindle diameter: 30 mm / 40 mm Kjdpjztzntofx Afqodr Vertical adjustment: 145 mm Tool holder: MK5 Feed: Yes Motor brake: Yes Dust extraction port diameter: 120 mm Weight: approx. 820 kg Included: - Augner stop jaws - 40 mm spindle

Condition: used, Year of construction: 2007, Used LMG Leadermac Smart MA 423 model LMC-423S 4-spindle edge trimming machine workable width: 15-230 mm workable height: 10-150 mm minimum individual piece length: 200 mm spindle rotation speed: 6000 rpm Ksdpezfgvgjfx Afqsdr 2-axis positioning with electronic control automatic motor start absorbed current: 52.5 A motor power: 1st motor: 7.5 HP 2nd/3rd motor: 10 HP 4th motor: 10 HP feed motor: 4 HP with cardan drive weight: 2200 kg year of manufacture: 2007 compliant with CE regulations

Condition: good (used), Item description: Kodpsy S Tzrjfx Afqsdr HOFMANN RW/NC-220/320L, 4th axis ----- Item condition: Good used condition. Removed from a Matec machine. Internal number: 26.368

Condition: new, Hofmann AB 9000.1 wheel balancing system, serial number: V AC, maximum power: 400W, unused, 100% functional, scope of delivery as shown in the photos. Ksdpfezm D Dqsx Afqjdr

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, - Working width: 230mm - Working height: 150mm - Minimum length: 200mm - Spindle speed: 6000 RPM Kdedpfxey N Ra Ho Afqjr - 5 heads - Head arrangement: bottom / right / left / top / top - Motor power: 5.5, 7.5, 7.5, 7.5 kW - Feed motor power: 3.7 kW - Stepless feed speed adjustment: 6-24m/min - Spindle diameter: 40mm - Year of manufacture: 2014 - Weight: 4000 kg

Condition: used, Hofmann under-table milling machine Kdodezp D Smepfx Afqor Spindle adjustable up-down and tilted electrically 40mm diameter replaceable spindle Spindle speed adjustable via frequency inverter 7.5 kW motor Left-right rotation Spindle lock Brake The milling machine is in working order and ready for use.

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Features and technical specifications: Kdedpezk Nnpjfx Afqsr - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach

Condition: used, Year of construction: 1979, Used Machine Year of manufacture: 1979 Features and technical specifications: - Planing table width: 500 mm - Planing table length: 2,650 mm - Cutter shaft: 2x strip planer blades - Motor: 3 kW - Planing guide can be tilted up to 90° The machine does not have a motor brake and can therefore only be sold for spare parts! Availability: Immediate Location: 63934 Röllbach Ksdozk Nmxepfx Afqsdr