Press brake

HACO ERM 36150

Condition: good (used), Year of construction: 2000, Gebruikte 3,6 meter CNC-kantbank van Haco Type: ERM 36150 Capaciteit: 3600 x 150 ton Fgedpfxoztaxde Ahaof BC55 CNC-besturing Bouwjaar: 2000 CNC-bombering Euro-gereedschapsklemming

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Fgsdpfeuu Ntgsx Ahajf Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 83966, functionality: fully functional, pressing force: 150 t, TECHNICAL DETAILS Pressing force: 150 t MACHINE DETAILS Machine weight: 9,500 kg Fgodpfx Ahjyykvpjaof EQUIPMENT Fastbend 2D control on Y1, Y2 and X axes Euro tool clamping A complete set of tools

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Fgjdpfxsxtbf Ee Ahaof Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc x-axis 260 mm Fedpfoy Sblrox Ahaogf z-axis 830 mm weight of the machine ca. 6000 kg

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, We are selling this lathe. Accessories included: steady rest, additional milling attachment. Turning length: 8000 mm Diameter over bed: Ø 2020 mm Diameter over cross slide: Ø 1600 mm Spindle bore: 120 mm Fgodsx Auwgopfx Ahaef Spindle speed/ranges: 180 rpm Spindle power: 80 kW Tailstock spindle: Ø 400 Spindle travel: 250 mm Dimensions: Length: 15360 mm Width: 3520 mm Height: 2600 mm Weight: 78000 kg The machine is located in the area of the former Vítkovice Foundry in Ostrava, Czech Republic. The machine is connected and can be tested. We can send a video of the machine via WhatsApp.

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Fgsdpfoxg Nd Ajx Ahaef Control: Fanuc 6T Equipped with: See photos

Condition: used, TURNING CENTER "MORI SEIKI" MOD. ZL 200SMC With twin powered turret and sub-spindle CNC MSC-501 Turning length: 452 mm Max. turning diameter: 388 mm Max. diameter over bed: 510 mm Distance between centers: 751 mm Spindle mount: A2-6 Spindle speed: 4,000 rpm Spindle motor power: 11 kW Number of tools: 12 Fjdjxwxwtspfx Ahajgf

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, turning length: 532 mm, turning diameter over cross slide: 500 mm, turning diameter: 325 mm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, travel distance X-axis: 195 mm, travel distance Z-axis: 430 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total length: 2,875 mm, chuck outer diameter: 260 mm, total width: 1,675 mm, spindle nose: A2-8, overall weight: 4,650 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have acquired this HWACHEON HI-TECH 200BL MC directly from production in working condition—see the video of the machine operating prior to dismantling. The machine is very comprehensively equipped and comes standard with: - C-axis + driven turret (both positions). - Renishaw probe. - Chip conveyor + collection bin. - Röhm 3-jaw chuck (DURO-NC 260/3) including 2 sets of top jaws. - 13 EWS toolholders, 4 of which are driven. - Various clamping sleeves and collets. - Original HWACHEON and FANUC documentation. The machine can be inspected under power in our showroom! Fjdsypc H Ropfx Ahasgf

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC Fsdpfx Aopkyn Rjhajgf