Rotary table

FRITZ WERNER

Condition: used, Year of construction: 2005, Fritz Werner TC630-N CNC 5-axis (3 + 2) horizontal machining centre with Siemens 840D control Tjdpfxoz Hzwro Aa Tec with Knoll coolant through spindle system, Knoll chip conveyor, Renishaw probe interface, mist extraction unit, chiller, handwheel & manuals Rohm Power Chuck & Rohm Collet System On Rotary Table. Axis Travel 'X'=1,000mm, 'Y'=820mm, 'Z'=400mm, 'C'=360°, 'B'=360°. Maximum Spindle Speed 6,000rpm. Spindle Taper SK50. 50 Position ATC.

Condition: good (used), Tailstock Manufacturer: Fritz Werner Adjustable center height Maximum center height: 150 mm Minimum center height: 130 mm Base width: 180 mm Todpfod Hurijx Aa Tjc Base depth: 115 mm Width of the centering block: 14 mm Weight: 10 kg Transport dimensions: L. 210 x W. 120 x H. 140 mm

Condition: used, / weight 295 kg Center height: approx. 180mm Tedpjykvbdefx Aa Tjc dimension Length: about 480mm Width: about 450mm Height: 280mm Weight: 110kg

Condition: used, table diameter 630 mm weight of the machine ca. ca, 0,35 t table height 220 mm Tedpfsymf U Esx Aa Tec

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Todpeymga Nefx Aa Tec Total weight: 160 kg

Condition: ready for operation (used), Year of construction: 1984, Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible. Tedpoxl Elyjfx Aa Tsc

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Tjdpfx Aajzqfxde Tjc

Condition: used, Year of construction: 1981, functionality: not functional, machine/vehicle number: 24003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Control system modernization, 2007 Control: SINUMERIK 802D sl X/Y/Z axis travel: 1600mm/1200mm/1400mm Tool holder: ISO50 Tool holder diameter: 110 mm Tsdpozqbbzofx Aa Tec Pallet fixture: 800x800 Table dimensions: 1200x1200 Setting accuracy: 10s

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head -Height: adjustable -Recording: Top Tjdpfxsdna Aco Aa Tsc -Dimensions: 245/280/H200 mm -Weight: 28 kg

Condition: good (used), Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg Tjdpfxeb A Nu Rj Aa Tjc