Throughfeed drilling machine

Format4 Creator 950

Condition: used, Year of construction: 2022, functionality: fully functional, BASIC TECHNICAL SPECIFICATIONS: Working dimensions: Pgjdpfxszp Nzge Appot - X-axis: 3000mm (practical maximum length is unlimited), - Y-axis: 950mm, - Z-axis: 80mm (maximum workpiece thickness), 250mm from the console. Travel of working axes: - X-axis: 1475mm (1200mm without workpiece handover), - Y-axis: 1550mm, - Z-axis: 225mm; Axis drive system: X-axis: gripper movement via toothed rack, Y-axis: via toothed rack, Z-axis: lead screw Travel speeds: - X axis: 90m/min (with open grippers) / 25m/min (with closed grippers) - Y axis: 90m/min - Z axis: 18m/min. - Required compressed air pressure: 8 bar (at the inlet), 6 bar (min. operating) External dimensions: - Length 2075mm (one module) x Width 2400mm x Height 2274mm Construction: Monolithic steel frame. Machine weight: 1950 kg. MILLING UNIT: - Motor power 12kW (S6 class, max. power at 12,000 rpm) - Spindle speed 1,000-24,000 rpm (controlled via a frequency converter), - Motor cooling is air-cooled. Bearings are ceramic. - Pneumatic tool clamping, HSK-F63 type, via a tool magazine (collets with a diameter of 0-20mm, ERG-32 type). - Pneumatically controlled extraction hood in 2 positions - Maximum tool weight is 7.5kg (depending on the spindle speed). Drilling unit with built-in saw in the X-axis, model DH-17 6H 1S. - UPS system for uninterruptible power supply - Barcode reader - wireless - Device for automatic tool length measurement - Optical display of machine status on the console - Additional sealing on all guides - Air cushion on the inlet and outlet table - Workpiece placement at the rear of the machine - Larger drilling unit DH25 8H 1S (25 drills) - Additional pneumatic front support for longer workpieces

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Psdpst Hal Defx Appegt Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: as good as new (ex-display), functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Use from interior fittings to room doors Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) 800 E-Learning F4Design Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Z= 225 mm Working field X= 3500 mm (infinite) or 130 kg maximum load Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface Pjdpfxsu Eg A Ue Appogt

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 175 h, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,700 mm, workpiece width (max.): 950 mm, overall weight: 2,500 kg, table width: 950 mm, working width: 950 mm, air pressure: 6 bar, feed length X-axis: 3,700 mm, feed length Z-axis: 80 mm, power of the milling unit: 12,000 W, rotational speed (max.): 24,000 rpm, Equipment: rotational speed infinitely variable, Lightly used 3-axis CNC machine available immediately! 4-sided formatting 12kW main motor HSK 63F Automatic 4-position tool changer Pickup station for additional tools Pjdpfxexmbm Ao Appegt Drilling head DH17 2 alignment stops in X-direction for short/long panels Foldable tables at front and rear Software on the machine AND in the office with dedicated license DXF import Modern, fully-featured CNC machine with low operating hours – immediately available!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Pgedpfx Apet Akgwopot Power : 400V/150A/60000W Year of construction : 2000

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC Pgodpfxopkyn Ro Appjt

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Pgjdpfod Tyaaex Appst Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: TXLT5096, turning diameter over cross slide: 220 mm, turning length: 454 mm, turning diameter: 340 mm, spindle bore: 51 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 185 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, Equipment: rotational speed infinitely variable, TAKISAWA TCY 200 YL5 LATHE • Type: TAKISAWA TCY 200 YL5 Lathe • Year: 2015 • CNC: FANUC 32iB • Travel: X/Z/Y/A 185/530/30/580 mm Psdpfezc Edrjx Appjgt • C-axis • Machinable length: 454 mm • Maximum workpiece diameter above the machine bed: 340 mm • Maximum workpiece diameter above the carriage: 220 mm • Bar capacity: 51 mm • Spindle speed: 3200 rpm • Spindle power: 7.5/5.5 kW • Spindle nose: A2-6 • Turret: 12 stations • Live tool speed: 6000 rpm • Live tool power: 3.7/2.2 kW • Digital tailstock • Rapid traverse X/Z/Y/A: 20/24/10/20 m/min • Dimensions: 2880 x 1795 x 1700 mm • Weight: 4.1 t • 200 mm diameter chuck with automatic control • Chip conveyor • 11 tool stations • 2 axial turning tool stations • 2 radial turning tool stations • 1 live center • Documentation • Machine available for inspection in ARDENNES.

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, Secondhand Mazal Integrex i500V Pgsdpfsyymrmsx Appot

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16K016032, turning diameter over cross slide: 380 mm, turning length: 500 mm, turning diameter: 380 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 18,500 W, rotational speed (max.): 5,000 rpm, turning diameter over bed slide: 380 mm, overall weight: 5,200 kg, bar passage: 65 mm, chuck outer diameter: 305 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, We are offering a used CNC lathe SMEC SL2500BM, year 2016, in very good working condition. The machine has been regularly maintained and is ready for immediate operation. Key specifications: Max. turning diameter: approx. 380 mm Max. turning length: approx. 500 mm Spindle bore: 65 mm Turret: 12 stations Live tooling (BMT65) – suitable for complex machining CNC control: FANUC 0iT Rigid and stable construction Podpfx Apsyxccfepogt