Thread roll die thread rolling

Fette diverse

Year of construction: 2015, Condition: used, Technical data bale opener and dewiring line with weighing system Bale feeding belt, pos. 1: Belt length 11,000 mm Width between side parts 1,460 mm Cfv9Oe8H0I Belt width 1,200 mm Max. Load 7,000 kg Conveying speed 0.2 m/second Drive power 3 kW Pitch of idlers 250 mm Side wall height in feed area 70 mm Side wall height impact wall 1,000 mm Feed height 1,800 mm Industrial weighing system for the bale feeding belt (additional equipment): Weighing terminal type IT1 Ethernet 8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/each Preload of the system 5,000 kg Feed belt to bale opener and dewirer, pos. 2: Belt length 9,500 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 6,000 kg Conveying speed 0.25 m/second Drive power 9 kW Pitch of idlers 250 mm Side wall height 800 mm Pitch 13 Bale opener and dewiring station, pos. 3: Type B/E 3213 Year of manufacture 2015 Belt length 2,300 mm Width between the side parts 1.600 mm Belt width 1,200 mm Max. Load 1.500 kg Conveying speed 0.25 m/second Drive power 1.5 + 1.5 + 1, 5 + 2.2 + 30 kW Height of side panels 800 mm Blade lowering speed 70/40 mm/second Hydraulic pressure 160 bar Pneumatic pressure 6 bar Height of the system 5,700 mm Bale length dimensions min. 1,000 mm, max. 2,200 mm Bale width dimension min. 750 mm, max. 1,200 mm Bale height dimension min. 750 mm, max. 1,200 mm Material qualities provided OCC department stores' paper, mixed paper, punching waste, label waste, beverage cartons Wire diameter 3 - 4 mm Operating hours approx. 3,500 hours Throughput capacity approx. 50 bales/hour Total power consumption approx. 37 kW Control system Siemens S7-300 Operator panel Siemens HMI TPU1200 in 12". Wire reel for wire winding, pos. 4: Drive power 5,5 kW Pneumatic working pressure Condition of the baler The complete plant was used exclusively in trial operation for opening and de-wiring bales of pressed OCC paper and beverage cartons. After a short time, the project was discontinued and the system was no longer used. The conveyor technology and the bale opener and dewiring unit are really in a very good condition. As you can see from the pictures, there is almost no wear visible. The production line is ready for immediate use and available at short notice. The new price of the plant was 597.000,- €. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available in German language. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: not inspected (used), Functionality: unexamined, Hello, Various machines and containers are for sale, including: -Robust film cutting machine -Deep-drawing machine for films and molded parts -Brand new agitator tanks and storage tanks between 300 and 1500 liters with motor and control system -20-liter planetary mixer -Powder mixer -And much more The attached images are just a few examples. Dqvrtp -Various laboratory equipment -2x industrial fans: The larger one has a flow rate of ~88,000 m³/h, the smaller one 56,000 m³/h. The two fans are being sold on the base frame together with the corresponding 29 and 18.7 kW motors. -Heavy-duty Yale 3-ton ant -Brabender Technology bag chute -Other battery-specific laboratory equipment If you are interested in one or all of the devices, please simply arrange an on-site appointment!

Condition: reconditioned (used), Wire stitching machines Agrafix BX - see also BM5136 - Wire stitching machine - Staple width 14mm - Block and saddle stitching (brochures) - Stapling up to 25mm / piercing up to 40mm SOLD - Speckbotel GFM - see also BM4860 - SOLD - Long arm cardboard stapler 500mm depth Cx2Gxjxtj - Longitudinal & cross stitching - Solid cardboard 2-4mm thick SOLD - Nagel Multinak-S - see also BM4979 - SOLD - Double head stapler - Staples - Electric drive - Foot pedal - Stapling up to 25mm / piercing up to 40mm - Staple thickness 24 | 26 | 30 Eyeleting device HANG Piccolo III - see also BM5105 - Manual operation with automatic - eyelet feed. for eyelets with approx. - 5.5mm, punches and eyelets in one - operation, particularly suitable for lawyers, notaries

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent Bq3Xijtlli -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Condition: used, Details on request Drctav

Condition: used, Year of construction: 1999, Functionality: fully functional, FETTE TABLET PRESS, MODEL P1200 Year of construction: 1999 Ideal for production of mono tablets manufactured by standardized processes. With manually-operated turret exchange system. Drehm7 MACHINE CHARACTERISTICS Punch type: EUD Pre-compression force (max): kN 80 Compression force (max): kN 80 PRODUCTION CHARACTERISTICS Tablet output max: 120,000 tablets/h Tablet diameter: 25 mm Tablet thickness max: 8.5 mm Filling depth max: 22 mm MACHINE SIZE Dimensions: 900 x 1,160 x 1,875 mm Weight: 2,500 kg

Condition: used, For sale is a sorting plant for commercial waste, paper, cardboard, plastics etc., year of construction 2022, only 151 operating hours, with a sorting capacity of up to 20,000 tonnes/year, in two-shift operation. The plant consists of the following components: 1 piece feeding / dosing hopper with steel slat conveyor and a dosing drum, manufacturer Bollegraaf, type BDF-1200/2000 1 piece ascending conveyor between the feed hopper and the sorting cabin, manufactured as a troughed conveyor, manufacturer Lubo Systems, type TBM 2000 x 15000 1 piece sorting cabin, air-conditioned (heated), measuring 14,500 x 5,732 x 3,270 mm (l x w x h), with 4 sorting stations, 8 discharge chutes and 5 material bunkers underneath. The concrete blocks are not included in the scope of delivery of the sorting system. 1 piece sliding belt conveyor as sorting belt, manufacturer Bollegraaf, type HBGT 250/1400 * 15000 1 piece ventilation system for the sorting plant with an air capacity of 8,000 m³/hour, heated with 93.8 kW electrical heating power, manufacturer MANDIK. The area required to install the sorting system in its current configuration is at least 46 x 7.5 m (345 m²). The height of the sorting cabin including the ventilation pipes is 7,370 mm. Remark: The system is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without the use of materials) if required. The plant is sold ex works. The dismantling and loading of the entire system as well as the broom-clean handover of the hall is at the risk and expense of the buyer. The owner can provide sporadic logistical support during dismantling with forklift trucks, wheel loaders and excavators. Technical documentation for the system and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) is only available in German. The existing control cabinet controls all of the customer's machines in two halls and is therefore not included in the scope of delivery of the sorting system. The control cabinet is disconnected on site, dismantled and remains with the previous owner in order to be able to continue operating the remaining systems on site. Only the frequency converters for the individual machines of the sorting plant are included in the scope of delivery. Cfwjv9Ltnw The concrete blocks under the sorting plant are also not included in the scope of delivery and remain with the previous owner on site. A viewing of the plant is possible by appointment after the prospective buyer has sent the complete company details (self-certification) and a subsequent credit check. We accept no liability for the technical details or any errors.

Year of construction: 1991, Condition: used, Additional title: stainless steel tanks for wheat beer fermentation Total capacity (gross): 465 hl Dqof9F Features: 2 vertical tanks (1 x ca. 150 hl, 1 x ca. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast tube, own temperature control

Condition: excellent (used), Gear milling cutter, modular milling cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 2 pieces -Type: Mod.4,5 R1 EW 20° see photos -Hole: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 170/90/H90 mm Drdq2L -Total weight: 3.4 kg

Condition: used, Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m3 - Mixing and equalisation tanks 2, 40 m3 - Mixing and equalisation tanks 3, 80 m3 - Bioreactor 1, 240 m3 - Bioreactor 2, 240 m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m3 - Secondary sedimentation tank 2, 100 m3 - Thin sludge tank, 70 m3 - Thick sludge tank, 90 m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25 m3 - Various process water pumps Bioreactor capacity 2 x: 240 m3 Csjytsrmj3 Operation / Control: Siemens Simatic S7 Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x sludge dewatering; thick sludge tank

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 2 pieces -Type: Mod.2.5 R1 EW 15° see photos -Hole: Ø 27 mm -Price/Delivery: complete Bw9Rrodara -Transport dimensions: 270/175/H125 mm -Total weight: 4.3 kg

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33 Ale and 0.5l NRW disposable bottles are used. The system consists of the following machines/components: -New glass clearer Manufacturer: Kettner -Bottle filler Manufacturer: KHS -2 cap feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner Pallet binder Manufacturer: Born Pallet film wrapper: Manufacturer: Robopac Pallet labeling Manufacturer: Weber Marking Systems Additional title: one way bottles Dqoflf Capacity: 30000 bottles/h Formats: 0,33l Vichy, 0,33l Ale and 0,5l NRW Features: New glass clearer; bottle filler; 2 closure feeders; bottle level control; labeler; label control; packer; palletizing system; pallet binder; pallet film wrapper; pallet labeling

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 4 pieces -Type: Mod.5 R1 EW 20° see photos -Hole: Ø 32 mm Drdqkf -Price/Delivery: complete -Transport dimensions: 220/220/H125 mm -Total weight: 17.8 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 3 pieces Bw70Tdj3Os -Type: Mod.4,5 R1 see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 320/120/H120 mm -Total weight: 13 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 7 pieces -Type: Mod.4 R1 EW 20° see photos Drdqc9 -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 370/190/H110 mm -Total weight: 18 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.3,5 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete Bw7I32P3Yu -Transport dimensions: 290/210/H120 mm -Total weight: 20.6 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 2 pieces -Type: Mod.3,25 R1 EW 20° see photos Drdp9R -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 185/100/H110 mm -Total weight: 5.9 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.3 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H115 mm Bw3Xgtv7Cw -Total weight: 14.5 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces Drdpyv -Type: Mod.2.5 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H125 mm -Total weight: 19.4 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 4 pieces Bw3O0Mtwp3 -Type: Mod.2,25 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 170/170/H110 mm -Total weight: 10.6 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces Drdput -Type: Mod.2 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/180/H115 mm -Total weight: 18.3 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 7 pieces -Type: Mod.1,75 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 350/190/H120 mm -Total weight: 22.2 kg Drdpt9

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 3 pieces -Type: Mod.1,5 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 190/170/H120 mm Drdptb -Total weight: 9.5 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutters -Type: Mod.1 EW 20° Ø 80 x 110 mm see photos -Hole: Ø 32 mm -Quantity: 1x cutter available Bw23Gleeju -Dimensions: Ø 80 x 110 mm -Weight: 2.5 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, lug hobs -Type: Mod.6-R1 EW 20° see photos milling cutter -Hole: Ø 32 mm -Quantity: 1x cutter available -Dimensions box: Ø 133 x 130 mm Drdpq2 -Weight: 7.4 kg