Stamping and Punching Machine

EUROMAC XP 750 / 25

Condition: ready for operation (used), Year of construction: 1999, Euromac hydraulic punching machine Type CX1000/30/2000 Dwodpfx Afspmt Ttsvod Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Condition: good (used), Maximum turning diameter with top carriage 1350 mm Maximum turning diameter with side carriage 1100 mm Maximum turning height 1000 to 1250 mm Table diameter 1100 mm Dwodpstn S D Aefx Afvjd Maximum table load 4000 kg Power of main motor 30 kW Table speeds 6.3 - 200 rpm Number of table speeds 16 Distance between floor and table surface 955 mm TOP CART: Vertical travel of the ram with tool holder (Z axis) 600 mm Longitudinal travel of the slide (X axis) 700 mm Number of tool holes in the tool holder 5 Diameter of tool hole 60 mm Working feeds 12; 0,21 - 10 mm/min Fast feed rate 1880 mm/min SIDE CARRIER: Vertical slide travel (R axis) 800 mm Slide travel (P axis) 630 mm CROSS BEAM: Vertical travel 1000 mm Feed rate 500 mm/min

Condition: excellent (used), Lead and tension spindle lathe Dodpova Ef Tofx Afvewd spindle bore 76 mm Center height 220 mm turning length 3.00 m Multifix steel holder with 5 cassettes Coolant device Operating instructions

Condition: used, Colchester Magnum 1250 Gap Bed Centre Lathe. Distance Between Centres 4000mm (157"). Swing Over Bed 635mm (25"). Swing In Gap 900mm (36"). Spindle Bore 118mm. Spindle Speeds 6.3 - 1250rpm. Dwjdpfxozy Im Nj Afved Leadscrew 2 TPI. Rapid Power to Saddle & Cross Slide. Quick Change Tool Post & Holders. 3 & 4 Jaw Chucks. 3 Point Roller Bearing Steady. Newall DP 700 Digital Readout & Tooling. Weight Approx: 6000KG

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: D08L/7603, Offer Number: D08L/7603 Machinetype: straightening and cutting machine Make: DEITERS Type: DaE Constr. year: 1977 Dodpfx Aswi S Nvjfvewd diameter range: 1-8 mm cutting length: 3000 mm speed - meters/min: 13-56 Location: In our warehouse

Condition: used, Year of construction: 1986, max. travel Y-arrester: 0-762 mm; max. travel X-arrester: 0-2000 mm; max. cutting pressure: 250kN (25t); max. plate thickness: 10 mm; max. punching diameter: 105 mm; max. stroke length: 0-25 mm; supporting table LxB: 4200x900 mm; total weight: 4100kg; electr. total connected load: 5,9 KW; dimensions: L=4200 W=1695 H=1660 mm; diverse accessories Dwodpfxobn U Tlj Afvsd

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8081, Offer Number: D08L/8081 Machinetype: straightening and cutting machine Make: WMW Type: UDARA10 Constr. year: 1980 diameter range: 3-10 mm cutting length: 2000 mm speed - meters/min: 22-71 Location: In our warehouse Dodpfx Afswi Svcsvjwd

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Dedpfx Afjzukt Ievowd

Condition: used, Year of construction: 1966, turning diameter over bed 1000 mm turning diameter over slide rest 760 mm turning length 2750 mm spindle bore 82 mm turning speeds 3,55-710 U/min faceplate 1000 mm 3-jaw chuck 500 mm steady 2 Dwjdpoyquzpefx Afvjd turning diameter in the gap 1400 mm length of gap 900 mm total power requirement 22 kW weight of the machine ca. 10 t dimensions of the machine ca. 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1968, Storage location: 2908 Manufacturer: CUGIR, Romania Year of manufacture: 1968 Machine number: 3266 Type/Model: FU-1 Travel ranges x-y-z: 700 - 370 - 250 mm Table: 1,250 x 320 mm Spindle speed range: 30 to 1,500 rpm Spindle mounting: SK 50 Feeds: Rapid traverse: Connection: 7.5 kW Accessories/Equipment: Condition: good Weight: approx. 2.5 t Dimensions: 2,000 x 2,000 x 1,700 mm Dsdevc D Apjpfx Afvowd