SIRCULAR SAW

EISELE

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: Fpedpeyub N Ujfx Aatoi • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop

Condition: used, Year of construction: 1989, saw blade diameter 320 mm cutting diameter 140 mm total power requirement 3 kW weight of the machine ca. 0,5 t Fpsdpew Dvivefx Aatsi

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Fedpfx Aaex A H Rrjtopi Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Condition: used, Motor: 3.0 kW Cutting height: 80 mm Swiveling function, no vice required Fpjdpfx Aaszkl U Setei Location: Nattheim

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. - Saw Drive / Output: 7.5 kW (7,500 W), S6, 2,850 rpm- Input Voltage / Current Type: 400 V, Three-phase, 50 Hz, I = 16A- Operating Pressure: 6 - 8 bar- Tool Specification: Suitable for saw blades Ø 550 mm (Saw blade bore: 40 mm)- Saw Blade Speed (Max.): 2,850 rpm- Cutting Capacity Dimensions: 270 x 150 mm (Width x Height)- Cutting Height (Max.): 150 mm- Cutting Diameter / Range: 270 mm max. / Round material at 90°: 190 mm max.- Maximum Profile Width: 270 mm- Section Length Limits: Min. 3 mm / Max. 4,000 mm- Minimum Remnant Cut: From 75 mm (profile-dependent)- Control System: Siemens S7 with SIMATIC HMI Touch Panel (Includes CPU 315, Flexisoft safety, piece counter, batch multiplier for bundle processing, cycle time indication in seconds, chain dimensions, and fault diagnostics)- Connectivity: IXON router for remote VPN connection- Material Feed Unit: 1 Axis — Electronic servo-driven material feed unit with 800 mm individual stroke feed length, utilizing a ball screw spindle, including a reversing device for cut lengths up to 4 m max. Profile support area in feed zone equipped with a lift/lower roller.- Saw Feed: Motorized saw blade feed, steplessly adjustable (operating from bottom to top)- Workpiece Clamping: Pneumatic horizontal and vertical profile clamping systems on both the feed and discharge sides of the saw head. Features a clamping pressure reduction system with 6 individual pressure regulators.- Additional Processing Features: Cutting gap extension on both sides of the saw blade to protect the cut surface- Lubrication: Intermittent spray device with level monitoring, automatic shut-off and a 1-liter lubricant reservoir- Safety & Noise Protection: Complete safety guard over both the saw head and the feed unit. Frame interior lined with soundproofing insulation mats. Automatic machine shut-off via limit switch at the end of the material stock.- Infeed/Outfeed Material Support:* Infeed side: 740 mm roller conveyor with physical intrusion guard* Outfeed side: 450 mm Pertinax tabletop with physical intrusion guard- Extraction Ports: Two extraction nozzles Ø 100 mm- Chip Extraction Unit:* Model: Chip Extraction MG 3 (Italyvacuum s.r.l. Vortex 58 FT)* Year: 2022* Power: 3 kW* Current: 7.2 A* Voltage: 400 V / 3~ / ± 5%* Weight: 130 kg* Features: Integrated Cyclonic System, Contactless Antistatic System- Viewing is possible while the power is on. Fodpjzi S R Refx Aatjpi

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9588, Reconditioned Production Ready！ Ref Code:1027 Prisma 600 Fodpszlaucjfx Aatspi Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Fpodszinzrepfx Aatei Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: ready for operation (used), A vertical cold circular saw Behringer Eisele with material support on the left and right is available. Saw blade dimensions X/Y/Z: 350mm/3mm/40mm, speed: 68rpm, max. cutting capacity for flat material X/Y: 170mm/100mm, max. cutting capacity for square material X/Y: 100mm/100mm, max. cutting diameter: 120mm, machine dimensions X/Y/Z: approx. 1050mm/800mm/2200mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Fpodpozklfqefx Aatoi

Condition: used, Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles Fjdpjc Ir Dvofx Aatopi -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Condition: good (used), Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm Fodpfx Aaob Hw Dbjtepi -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg