CNC folding press

EHT EHPS 25-35

Year of construction: 1995, Condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Bjixjxpl

Year of construction: 1993, Condition: good (used), Pressure 150 t folding length 3550 mm column width 3050 mm Control Cybelec DNC 880S stroke 700 mm throat 350 mm machine weight approx. 15.000 kg machine height 3.900 mm Accessories/equipment: - Bending aid in front of the machine Phdr7 - Parking space for bending aid - 3 pieces stop fingers

Condition: good (used), Year of construction: 1993, Press force 800 kN bending length 3050 mm ram stroke approx. 160 mm Installation height up to 340 mm Zcifoshw Dimensions LxWxH: 3750 x 1600 x 2850 mm Weight approx. 7500 kg including tools (see photos)

Condition: not inspected (used), Year of construction: 1992, CNC folding machine make: EHT, type: EHPS 11 - 45, SN: 206882, year: 1992, pressure capacity: 1,100 kN, working range: 4,450 mm, CNC control Cybelec, 2-hand operation, safety device make: Trumpf, retrofitted in 2023, last maintenance in 2023 by Trumpf for approx. €10,000.00, Note: Machine already professionally dismantled and ready for transport Bwhv2Rewqy

Year of construction: 1991, Condition: good (used), machine/vehicle number: 206157, with controlled axes: Y1, Y2, X, Z1, Z2, R, pneumatic die adjustment, motorized crowning, Accessories: 2 Auflegearme Tool: Spitz stamp with replacement blade: 5 x 250 mm, 1 x 175 mm Dzxncvum0 Block matrix: 6 x 515 mm, V11, V16, Zudrücknut 6.5 mm, V 11 Groove on 300 mm, 1 x 615 mm, V 11, V16, Zudrücknut V6, V23, V42, 6.5 mm, V16 Machine has been repaired by a qualified technician, tested, clean and fully functional. Test run was carried out. Pressure: 150 t Bending length: 3050 mm Machine weight: 11000 kg Throat depth: 350 mm Stand width: 2550 mm Power: 18.5 kW Piston stroke: 260 mm

Year of construction: 1992, Condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers R80Chmvyi - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Cp7Vgphiww Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: excellent (used), Year of construction: 1997, Equipment/accessories: -New control: Cybelec - 2025 Pressure 320 t Bending length 3550 mm Cybelec control Drdygb Column clearance 3100 mm Table height 900 mm Pillar stroke 270 mm Weight 24,000 kg Dimensions L-W-H 4600x2400x3000 mm Total power requirement 30 kW

Year of construction: 1983, Condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm Msnezk rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Condition: used, Year of construction: 2005, Functionality: fully functional, type of input current: three-phase, For sale hydraulic CNC press brake EHT TrumaBend S 85-25. High beam stroke 400mm in the range from 190mm to 590mm. Dpoxrh Pressure 85 tons. Bending length 2550mm. 4 bumper axes: R, X, Z1, Z2. Sliding lower tool beam. Tools included. For more information, please contact me.

Condition: reconditioned (used), Year of construction: 1990, Functionality: fully functional, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top Dqoo2R - motorized crowning

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: Bn8Hs7Eqpzv - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Year of construction: 1987, Condition: used, fabric-no. 202 395 working length 2550 mm output 2000 KN tracking travel 13 mm Bbx2N3Cjg3 safety distance 176 mm

Condition: good (used), Year of construction: 1995, Pressure 150 t folding length 4050 mm column width 3550 mm Control CYBELEC ModEva Pac throat 350 mm Cktkir9Wq distance table / ram 430 mm Table width 250 mm Total power requirement 18,5 kW machine weight approx. 14.500 kg space requirement approx. 4400x2100x3300 mm only available from April 2022

Condition: used, Year of construction: 1970, EHT guillotine shears Hydraulic type TSS 4- 25 Cutting thickness 4 mm Cutting length 2500 mm Uedkmjce3N

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, pressing force: 110 t, working length: 2,550 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! TECHNICAL DETAILS Working length: 2,550 mm Beiwkdu Control: DNC 94 PS Pressing force: 110 t

Condition: excellent (used), Year of construction: 1991, pressing force: 200 t, throat depth: 350 mm, Hydraulic press brake Fab. EHT Type. EHPS 20-30 Year 1991 Technical data Make: EHT Type: EHPS 20-30 Year of construction: 1991 Effective length: 3050 mm Distance between uprights: 2,550 mm Stand projection: 350mm Lift: 250mm Capacity: 200 tons Dimensions: approx. L 4.25 x W 2.0 (+ bending aids) x H 3.12 m Weight: approx. 14.5 tons Equipment - Manual die displacement Blxagyalfxa - Controlled axes: X, Y1, Y2 - 2 bending aids - R axis - pneumatically adjustable - DNC 30 control unit - Automatic top tool clamping - Tools can be changed vertically - Crowning manually adjustable - Safety light barrier Akas from Fiessler retrofitted - Tool package according to photos: - Upper tool height 220mm/R5, length = 5 x 500 + 550 mm - Upper tool height 220mm/R2, length = 2,800 mm, sectioned - Cranked upper tool, R5, length = 2,175 mm, sectioned - Die block with V65, V10, V18, V22, V16, V40, V50 All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 1990, Condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown Benrthjzj9 3 sets of tools included

Year of construction: 1990, Condition: good (used), Pressure 320 t folding length 8050 mm column width 7550 mm Control Cybelec ModEva 12S Equipment/accessories: - CNC-controlled backgauge x-direction and R-direction - motorized die shift M1 and M2 - 2 x pneumatic bending aids in front - pneumatic sheet holding unit B8U0Ifhdz8 - automatic die clamping at the top - motorized crowning rebuild 2009: - motorized die shift 111-112 mechanical and electrical NEW - backgauge X-R mechanical and electrical NEW - Punch clamping automatic mechanical and electrical NEW - CNC control mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main pump hydraulics NEW

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Yqimwg9 Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Functionality: fully functional, overall weight: 26,000 kg, color: green, maximum load weight: 26,000 kg, empty load weight: 10,800 kg, loading space width: 2,550 mm, Year of construction: 2014, Equipment: retarder, spoiler, trailer coupling, Body dimensions DISTANCE FROM 1ST TO 2ND AXLE 4.300 MM + MULTILIFT FX MEILLER RK20.65 20 TONS HOOK + TRAILER HITCH. Betwazhz Extras A/C, AUTOMATIC GEARBOX, ENGINE BRAKE, 3RD LIFT AND DIRECTIONAL, SPEED CONTROL, RADIO CD, REAR AIR SUSPENSION, ON BOARD COMPUTER, ELECTRIC LIFT, DISTANCE CONTROL, WHITE LINE CONTROL ...

Condition: used, mileage: 282,409 km, power: 265 kW (360.30 HP), fuel type: diesel, color: other, axle configuration: 6x2, tire size: 13 R22.5, fuel: diesel, wheelbase: 4,850 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,500 mm, loading space length: 6,570 mm, Year of construction: 2017, Equipment: air conditioning, cruise control, differential lock, = Additional options and accessories = - Adblue system - Climate control - Electrically adjustable door mirrors - Electrically operated windows - Lift axle - PTO - Radio with bluetooth streaming - Spare wheel - Toolbox = Remarks = Axles Configuration: 6x2 Crane Faucet length: 10,10 m Number of hydraulic extension: 3 Number of stamp: 2 Number of additional functions: 1 Remote control: ✓ Load hook: ✓ Rotator: ✓ Capacity meter: 10,10 m Capacity kilo: 7680 kg View more pictures and video's at Or visit our YouTube channel: Bart Spierings NL-DE-GB-FR) Govorim po ryccki Para información en Argentina llamar E-mail autobombas. We do our utmost to provide you with the correct information about the vehicle. Nevertheless, no rights can be derived from the information on our website. = More information = General information Year of manufacture: Oct 2017 Cab: single Drivetrain AdBlue system: Yes Transmission Transmission: 12 gears, Automatic Axle configuration Tyre size: 13 R22.5 Brakes: disc brakes Front axle: Steering; Tyre profile left: 35%; Tyre profile right: 35%; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Tyre profile left inner: 25%; Tyre profile left outer: 30%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Suspension: air suspension Rear axle 2: Lift axle; Steering; Tyre profile left: 35%; Tyre profile right: 35%; Suspension: air suspension Measures 3Fgbrgmao Dimensions (LxBxH): 1080 x 255 x 370 cm Weights Empty weight: 14.110 kg Carrying capacity: 11.890 kg GVW: 26.000 kg Max. towing weight: 44.000 kg Functional Crane: Fassi F 175 A.0.23, year of manufacture 2017, behind the cab Height of cargo floor: 137 cm Interior Number of seats: 2 Condition Number of keys: 3 (3 hand transmitters)

Condition: excellent (used), Year of construction: 1998, Mägerle profile surface grinding machine, Siemens 840 D Clamping surface 1250 x 350 mm Dreyrl CNC rotary table 5000 liter coolant tank

Condition: used, mileage: 173,324 km, power: 265 kW (360.30 HP), first registration: 12/2016, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 6x2, wheelbase: 4,000 mm, brakes: engine braking, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, number of seats: 3, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), had accident, immobilizer system, soot filter, traction control, Trailing steering axle, non-binding offer - subject to change and prior sale - sold without warranty - all information without guarantee! Fk3L2K0O3

Condition: used, mileage: 282,409 km, power: 265 kW (360.30 HP), first registration: 10/2017, fuel type: diesel, color: other, axle configuration: 6x2, tire size: 13 R22.5, fuel: diesel, wheelbase: 4,850 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,500 mm, loading space length: 6,570 mm, Year of construction: 2017, Equipment: air conditioning, crane, cruise control, differential lock, = Additional options and accessories = - Adblue system - Climate control - Electrically adjustable door mirrors - Electrically operated windows - Lift axle - PTO - Radio with bluetooth streaming - Spare wheel - Toolbox = Remarks = Axles Configuration: 6x2 Crane Faucet length: 10,10 m Number of hydraulic extension: 3 Number of stamp: 2 Number of additional functions: 1 Remote control: ✓ Load hook: ✓ Rotator: ✓ Capacity meter: 10,10 m Capacity kilo: 7680 kg View more pictures and video's at Or visit our YouTube channel: Bart Spierings NL-DE-GB-FR) Govorim po ryccki Para información en Argentina llamar E-mail autobombas. We do our utmost to provide you with the correct information about the vehicle. Nevertheless, no rights can be derived from the information on our website. = More information = General information Cab: single Drivetrain AdBlue system: Yes Transmission Transmission: 12 gears, Automatic Axle configuration Tyre size: 13 R22.5 Brakes: disc brakes Front axle: Steering; Tyre profile left: 35%; Tyre profile right: 35%; Suspension: leaf suspension Dre0I9 Rear axle 1: Double wheels; Differential lock; Tyre profile left inner: 25%; Tyre profile left outer: 30%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Suspension: air suspension Rear axle 2: Lift axle; Steering; Tyre profile left: 35%; Tyre profile right: 35%; Suspension: air suspension Measures Dimensions (LxBxH): 1080 x 255 x 370 cm Weights Empty weight: 14.110 kg Carrying capacity: 11.890 kg GVW: 26.000 kg Max. towing weight: 44.000 kg Functional Crane: Fassi F 175 A.0.23, year of manufacture 2017, behind the cab Height of cargo floor: 137 cm Interior Number of seats: 2 Condition Number of keys: 3 (3 hand transmitters)