Face Grinding Machine
DISKUS DDS 600 RAM

Name: DISKUS DDS 600 RAM
Brand: DISKUS
Availability: InStock

Year of construction

1972

Condition

Used

Location

Metzingen

Face Grinding Machine DISKUS DDS 600 RAM

Machine data

Machine type:: Face Grinding Machine

Manufacturer:: DISKUS

Model:: DDS 600 RAM

Year of construction:: 1972

Condition:: excellent (used)

Price & Location

Location:: Metzingen

Call

Details about the offer

Listing ID:: A203-63315

Reference number:: 1049-811863

Update:: 23.10.2025

Description

total power requirement 22 kW
weight of the machine ca. 8 t
Q U O T A T I O N

We are pleased to offer you ex our stock, subject to prior sale, and error in technical data :

DISKUS
Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding
system and automatic dressing cycle
model DDS 600 RAM
year 1972 / 2002 modernized Serial no 6967 _____

Grinding wheels Ø, each 600 mm
Grinding wheels bore x height, approx. 75 / 150 mm
Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s)
Lower wheel 765 rpm (24 m/s)
Grinding spindle drive, each 30 kW

Workpiece dimensions:
Grinding width (or workpiece diameter) approx. 20 - 120 mm
Grinding (workpiece) height max 50 mm
Hydraulic infeed impulse 0.0025 – 0.05 mm
Total feed way 150 mm

External Ø of workpiece carrier disk 810 mm
Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s

Total electrical load, approx. 50 kW - 380 V - 50 Hz
Weight, approx. 8,000 kg

Accessories / Special Features:

Nedjxqrbxspfx Aphjwl
• In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed.
• Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment.
• Workpiece height check to avoid crashing with griding wheels
• Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time).
• ELBARON Oilmist Extractor with stand and adjustable suction cone
• Walkable steel podium for easy machine operating and monitoring
• Grinding wheel exchanging device, various spare grinding wheels
• Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit.
• Currently no coolant filtration device available (can may be supplied separately).

This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.)

Condition : very good ! Very well maintained !
Please click here to soon view a video of the machine running :
!
Delivery : immediately available, FCA Metzingen
Payment : 100 % Net, after conclusion of contract, before loading

Seller

Last online: A week ago

Registered since: 2005

216 listings online

Call

Send inquiry

Telephone & Fax

+49 7123 ... show

Fax:

These listings may also fit your interest.

Listing

Germany

7,870 km

Welding set
BodorBodorWelder 1500 Pro

Call

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 760 mm, total width: 330 mm, total length: 540 mm, overall weight: 55 kg, product height (max.): 4 mm, laser power: 1,500 W, Intelligent welding process support Give your welding process additional drive with intelligent functions. The Bodor Welding Process Database incorporates welding parameters for steel from 1 to 4 mm in terms of flat welds and fillet welds. Working as a beginner’s guide, it allows users with different levels of expertise to weld effortlessly. Smart control knob The control knob is easy to navigate. Users are able to manage their welding solutions in one setting. They can select welding process and adjust welding parameters (e.g. power, weld bead width, frequency, etc) , and the knob will automatically store customized parameters for their operations in the future. Portable design, integrated power structure Without built-in water tanks or cooling fans, BodorWelder 1500 takes up a covering area of 0.24㎡. This compact machine aims to help users with complex welding jobs in diverse working scenarios. It also comes with a set of Bodor welding nozzles, fulfilling all kinds of requirements. Nsdpfxsqx Hnye Aphjwl

See details

Listing

Centerless grinding machine HERMINGHAUSEN SR40 III CNC

Fuente de Cantos

7,534 km

Centerless grinding machine
HERMINGHAUSENSR40 III CNC

Call

Listing

CNC turning and milling center EMCO Emco Turn 365

Einöden

8,285 km

CNC turning and milling center
EMCOEmco Turn 365

Call

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production Nwedpfx Asycvaqephol The machine is available immediately

See details

Listing

Portalmillingmachine Kao Ming 4000mm Kao Ming KMC-4000SVH

Lemmer

7,494 km

Portalmillingmachine Kao Ming 4000mm
Kao MingKMC-4000SVH

Call

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,750 mm, travel distance Y-axis: 1,870 mm, travel distance Z-axis: 700 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 1,650 mm, total width: 3,500 mm, spindle speed (max.): 6,000 rpm, total height: 3,500 mm, distance between stands: 2,300 mm, rotational speed (max.): 6,000 rpm, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, X-axis: 3.750 mm Y-axis: 1.870 mm Z-axis: 700 mm CNC Controller: Heidenhain iTNC 530 Nodpfx Apjyac T Ejhjwl Spindle nose: ISO 50 Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Table size: 4.000 x 1.650 mm Distance between columns: 2.100 mm Featured with: - Vertical milling head attachement - Touch probe - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg

See details

Listing

Vilnius

8,376 km

Diesel generator
ETT55E

Call

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Nodpfxsxlngaj Aphewl Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

See details

Listing

Horizontal machining center Kitamura HX250iF

Ljubljana - Šentvid

8,450 km

Horizontal machining center
KitamuraHX250iF

€29,500

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe Nwjdpfx Apexur E Sehol - Renishaw tool measurement - Transformer - Approx. 150 tool holders

See details

Listing

Cylindrical grinding machine- Surface- Internal- External SIELEMANN R FuBR 80 NC

Schloß Holte-Stukenbrock

7,720 km

Cylindrical grinding machine- Surface- Internal- External
SIELEMANNR FuBR 80 NC

Call

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Nwodorntirspfx Aphol Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

See details

Listing

Halberstadt

7,855 km

Lathe
VDF BOEHRINGERT 11

Call

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Nwsdpfx Apexmd Uvshol Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

See details

Listing