Manipulator

DANGO & DIENENTHAL AMP 1000

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Bwedjuqdi Ujpfx Anqjw Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Bjdpfxeubyrxo Anqeww Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg.

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Bodpfxjywztge Anqeww Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Bwsdpfxeziw Nlj Anqsw Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: excellent (used), functionality: fully functional, overall weight: 100,000 kg, workpiece weight (max.): 18 kg, Hot forging hammer HUTA ZIGMUNT type MPM 3000 Bodpfx Aezzrtvonqjww Energy of blow: 10 000 kgm Ram weight: 3 580 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Bjdpfxeyxhq Io Anqjww Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Return force (gross): 1,660 kN Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Bwodpfxsy Ud N Se Anqow Video showing the machine in operation available!

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: M32L/8711, Offer Number: M32L/8711 Machinetype: hot nut former Make: HATEBUR Type: AMP30 Constr. year: 1968 diameter range: 64 mm max. width across flats: 56 mm max. outside dia. of round pieces: 64 mm bar dia.: 18-40 mm cutting length: 20-72 mm output - pieces/min: 140 Bsdpfxowi Suxj Anqjww number of forming stations: 3 press power: 230 t Location: In our warehouse

Condition: excellent (used), functionality: fully functional, Manufacturer: Šmeral Type of machine: Hot forging press Rated pressing force: 1,000 t Bsdpfx Ajzxhzwonqeww Ram stroke: 220 mm Stroke rate: 100 strokes/min Table size: 995 × 950 mm Ram adjustment: 10 mm Stroke of upper ejector: 35 mm Drive power: 40 kW Weight: approx. 45 t

Condition: excellent (used), Year of construction: 2017, Pressing force: 8,000 kN Stroke: 2,000 mm Clamping area: 4,900 x 2,500 mm Bjdpfx Asz A Tvxonqoww Max. tool weight: 50,000 kg Approach speed: 300 mm/s Working speed: max. 60 mm/s - min. 6 mm/s Weight without tool: 225,000 kg