Press brake

COLLY 320 / 6

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Tsdpfx Asydpxvja Tsc Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 Tedjy D Ngzepfx Aa Tjc plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Todsnvfduspfx Aa Tec

Year of construction: 2005, condition: ready for operation (used), Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible. Tedoxl Upnspfx Aa Tjc

Condition: good (used), Year of construction: 2003, functionality: fully functional, Press force: 135 t Bending length: 4100 mm Frame width: 3600 mm Control system: DELEM Tsdpfxszg A D Nj Aa Tjc Rapid traverse speed: 100 mm/sec Bending speed: 10 mm/sec Total power requirement: 15 kW Machine weight (approx.): 11,700 kg

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Todpfxjzz Rz So Aa Toc Capacity: 4100 x 250 tons Cybelec DNC 880S CNC control Y1, Y2, X and R axis CNC Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling

Condition: used, Year of construction: 2008, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, total length: 3,400 mm, total width: 2,180 mm, total height: 2,780 mm, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this used Ermak AP3100-160 press brake, manufactured in 2008, for sale. Power type: 3 AC Tjdpfx Aaezqav De Tsc Frequency: 50 Hz Operating voltage: 380 V Control voltage: 24 V Rated current: 35 A Rated current of the main fuse: 50 A Electrical wiring diagram no.: SN20080089 The machine is fully functional, and the last safety inspection was carried out in 2023. The machine is equipped with a press brake safety device (light curtain), which was also last inspected in 2023. Total weight of the machine: 9 tons Various tools (see photos) as well as the operating manual and safety inspection history are included in the scope of delivery. If you have any questions or require further information, please feel free to send us a message or call us.