Press brake

Bystronic Xpert 320/4100

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 42,663 h, stroke length: 265 mm, throat depth: 400 mm, controller model: MMC PLC, working width: 4,100 mm, bending force (max.): 320 t, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Travel X-axis: 600 mm Travel R-axis: 250 mm Travel Z-axis: 2,900 mm Stroke: 265 mm Throat depth: 400 mm Distance between uprights: 3,750 mm Installation height: 550 mm Table width: 60 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2 Control system: MMC PLC Oil capacity: 600 l Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,300 x 4,020 mm Weight: 29,000 kg Operating hours: 42,663 h EQUIPMENT Hydraulic crowning Side safety fences Rear safety guard Gbjdpex I Hzwsfx Abfjp FIESSLER light barrier Note: The machine is sold without tooling.

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Gsdporq D Niefx Abfobp The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm Gbodpfottah Rox Abfjp → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: new, Big gooseneck press brake punch H250/260/H280mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD L125/250mm Godpfjiim Ayox Abfobp

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m Gjdpfju Nu R Iex Abfobp dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control *

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, controller manufacturer: Cybelec, controller model: Cybtouch 12, working width: 6,000 mm, bending force (max.): 300 t, control type: CNC control, number of axes: 4, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Used 6metre x 300ton Adira Cnc Press Brake - Hydraulic Pressbrake Gjdpfx Aswu Ua Usbfjbp 300 Ton 6000mm bending Length Back gauge: X and Z Axis Upgraded touch screen control Cyblec CybTouch 12 Control System Year of Manufacture - 2005 Good service history including rebuilt ram cylinders, rebuilt crowning and upgraded control system Euro tool clamping

Condition: used, functionality: fully functional, Year of construction: 1997, 2 units Figee overhead crane, 35 tons, with swiveling hook, span approx. 18.60 m, and one unit approx. 21 meters, lifting height 10 meters. Gbedpfx Abjw S D Izjfjp

Condition: new, load capacity: 10,000 kg, Column lifting and rotating device with 10-ton load capacity, available as a set or individually. Driven on both sides. Gbjdpfowtq Dtjx Abfjp The machine is offered as a synchronized set or as individual units. Protec turning/positioning device Syncrolift. Double column, wireless and manual hand remote control. Column adjustment electrically drivable in both directions. Load capacity 10,000 kg, 360° rotation. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also available as a mono model (more economical). Optional with articulated flange (cardan flange).

Condition: new, MVD Synchronized Hydraulic Bending Press Ready in stock unless sold out! Mod. I-Bend D 3100/320 Color Videographic Numerical Control ESA S875 W *dxf Controlled axes No. 8 ( Y1-Y2-X-R-Z1-Z2-X5_A1) WILA motorized compensation table Multi-beam barriers NEW ELECTRONICS DSP LASER UNIMEC high-speed motorized rear register (Made in Italy) GIVI MISURE optical scales (Made in Italy) Bending length mm 3100 Power exerted Ton 320 Recess mm 510 Stroke mm 410 Godpfjrqvtmox Abfobp Opening mm 635 Upper tools and lower die ROLLERS supplied

Year of construction: 1972, condition: used, machine/vehicle number: WIT, Technical data: 1x Vetter / Demag column-mounted slewing jib crane NL 250KG with Demag chain hoist Payload at full radius 250KG / 0.25to payload Several cranes available (7 pieces) Height: approx. 3.75-4m Outreach: 3+3.9m Weight complete approx. 700KG incl. cable towing, undercarriage etc Swivel range 360°, connection to 400V 16A Optionally also available with 250KG chain hoist Crane is disassembled and immediately available Godpferwkbujx Abfobp Item location is 75053 Gondelsheim Further cranes are available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only