ITNC-530 / Spindle exchange 2023

BRIDGEPORT VMC 1000 XP

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 823679, Axis:XYZ (3-axis) Max. Travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530 Gbsdpfettm T Eex Aagei Dimensions: 2320x4140x2690mm

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Gbodpoqwyzfofx Aagji Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, table width: 1,200 mm, table length: 4,500 mm, rotary table diameter: 1,250 mm, NC Rotary table 1250 mm with 50 Rpm Full C-Axis  360.000 with HIGH TORQ Drive HSK-100 with 90 kW and 15.000 Rpm 5 Axis simulteneous package Last service in 2023  X - Travel: 4000mm Y - Travel: 1200mm Z - Travel: 1300mm A - Axis: 105° B - Axis: 360000° Table Length: 4500mm Table Width: 1200mm Table Ø: 1250mm Spindle Taper: 100ISO/Bt/Mk Power on spindle: 90kW Speeds / ranges: 15000Rpm ATC / revolver: 60 Coolant through spindle / Bar:70 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Gbedpfxjx Sqf Io Aagji Length: 10500mm Width: 4500mm Height: 4100mm Weight: 34000kg

Condition: good (used), Year of construction: 2000, Parts shown by hand on movie or pictures not come. 30 tool places in tool changer. coolant thru spindle 18 bar, Gbodpfew Tl Dtjx Aagoi

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 610 mm z-travel 610 mm control Heidenhain 530 weight of the machine ca. 6700 t Gsdpfx Aaexbtnbsgsbi

Condition: ready for operation (used), Haas VF-5B/40HE vertical machining center, year 2006. Gbedpfx Aasw H R H Isgei

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Gbedpfx Aaexdxhrogsi Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 800 mm Gbodpfxjxvfvmo Aagsi Y-AXIS TRAVEL: 510 mm Z-AXIS TRAVEL: 600 mm SPINDLE: 8000 rpm; BT 40 TABLE SIZE: 1000 x 490 mm MAX ADMITTED LOAD: 750 Kg TOOL MAGAZINE: BASKET-TYPE ; 20 POS CONTROL UNIT: HEIDENHAIN TNC 410 WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3160 x 2160 x 2740 mm

Condition: used, Year of construction: 2011, operating hours: 6,984 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 635 mm, controller model: Heidenhain TNC 530 i, total height: 3,000 mm, total length: 4,000 mm, total width: 3,050 mm, table width: 600 mm, table length: 1,370 mm, table load: 950 kg, number of slots in tool magazine: 20, The Hartford VMC-1270 is a robust and precise CNC machining center, ideal for demanding milling operations. With a generous travel range of 1270 x 635 x 635 mm, the machine offers versatile applications in metalworking. It is equipped with a Heidenhain TNC 530i control system, a BT-40 tool taper, and a spindle speed of up to 8000 rpm. Gbsdpfoxyh Itex Aagei The table measures 1370 x 600 mm, enabling the machining of larger workpieces as well. With a machine weight of approximately 7200 kg, the VMC-1270 stands for stability, precision, and reliability. The machine was built in 2011 and is designed for operation with 380 V power.

Condition: excellent (used), Year of construction: 2004, VERTICAL MACHINING CENTER FAMUP TRAVELS 1600x650x650 SPINDLE ISO 40 12,000 RPM RANDOM TOOL CHANGE 30 POSITIONS HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR SPINDLE COOLING FRIDGE CNC FANUC 18iMB REMOTE HANDWHEEL MACHINE WEIGHT 12,000 KG Gedpfx Aaovq Rznjgjbi