Edge router

Brandt F 10

Condition: used, Year of construction: 1981, Radius/flush milling machine, edge milling machine, edge milling machine, molded part milling machine B9rbhin For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii -Built-in milling cutter: 30 ° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Condition: excellent (used), Postforming Machine make Brandt Lilj2beoup type PF 10 workpiece thickness max. approx. 200 mm workpiece thickness min. approx. 16 mm workpiece length 1800 - 4200 mm pressure rail total power 12 kW machine dimensions approx. 6250 x 2550 x 2050 mm (LxWxH) weight approx. 3800 kg

Condition: ready for operation (used), Year of construction: 1989, Workpiece length: 1800-4200mm, max. profile height: 200mm, min. workpiece thickness: 16mm, working height: 950mm, connection cable: 12kW, length: 6250mm, height: 2050mm, weight: 3.8t. Bgz7dj0vfu2

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm suction nozzle 80 mm pneumatic connection cable + plug 16 A Ceh8huqoxj 1 set of operating tools 1 set of sensing rollers

Condition: used, Year of construction: 1989, - workpiece thickness max. (mm): 55 - workpiece width min. (mm): 80 - Profile depth max. (mm): 80 - inner radius min. (mm): 10 Ctv20pmxcb - Edge material thickness max. (mm): 3 - depending on radius and edge material - milling motor: 0,5 kW, 27.000 rpm. - Electricity: 220 V - 1 Ph. - 50 Hz - Connection value (kW): 0,5 - Compressed air connection (bar): 6 - dimensions L x W x H (mm): 850 x 650 x 1430 - working table height (mm): 1000 - buffing unit: for processing thick PVC edges - Weight (kg): approx. 120

Condition: reconditioned (used), Year of construction: 1988, for simultaneous upper and lower flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii Equipped with stop rails for straight edges and centric stop rings for shaped parts workpiece thickness approx. 12 - 60 mm workpiece width min. approx. 30 mm inner radius min. approx. 45 mm edge thickness max. approx. 1 mm milling motors 2 x 0,26 kW, 3.000 rpm/50 Hz Electric 380 V, 3 Ph., 50 Hz, pneumatic connection 4 bar working height 850 mm Cross-cutting device EK 11 for exact trimming of edge material protrusions on workpiece ends with straight and curved edges edges mounted on F 10 workpiece thickness approx. 10 - 60 mm edge material thickness max. approx. 1 mm cross-cut tool diam. 100 x 32 x 3 mm Z = 20 drive 1 x AC motor via toothed belt on tool shaft Hjnfnuyutt power 0,37 kW Speed 3.000 rpm Electrical 380 V, 50 Hz, 3 Ph.

Condition: used, Year of construction: 1988, used, good condition manufactured by Brandt D0uism type F10 + EK 11 - trimming built in 1988 Masch.-No. 0-260-01-2188/0-260-01-2746 required space ca. 1100 mm x 1100 mm x 1700 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen, without revision, without guarantee and warranty

Condition: ready for operation (used), Year of construction: 1978, For flush trimming of molded parts and straight workpieces - Height adjustment max. 60mm - engine 380V; 0.52kW Bpulozzi3 - Chip blow-off with foot pedal - Suction funnel

Condition: ready for operation (used), Year of construction: 1992, machine/vehicle number: 92409, Max pressure 10 bar capacity 53 Liters/s Motor power 22 kW Weight 460 kg Cigmsmzyar

Condition: used, Year of construction: 1973, machine/vehicle number: 1308, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm C3e2ngvg distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 910 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 600 mm, tool mount: 40 mm, type of control: NUM Flexium+ mit nPad, Condition: new, Year of construction: 2023, Operating hours: 0 h, machine/vehicle number: 1169 NUM, Five-axis CNC milling machining center - 3D CNC machining center F2pecqwq9 > The CNC milling system Basis is the optimal entry-level model for milling plastics, composite materials such as CFRP, model-making materials, or aluminum. > High feed rate, compact 5-axis milling head for spatial machining, first-class milling results: The machine is individually adjusted to the material requirements before delivery. This ensures first-class surface quality and excellent milling results for all materials. > With a fixture from HG GRIMME SysTech, the milling quality can additionally be increased considerably. Existing fixtures or tables can be reused at any time. > Modular expansion stages: The CNC machine can be upgraded at any time, even individual requirements can be implemented quickly. With an optional partition wall, for example, unloading and loading can take place on one half of the table while the workpiece is being machined on the second half. The production cycle is accelerated with this technology. > Safety The safety booth already has a generous access area in the basic version and can be optionally upgraded with a soundproofing package. All drives and guides are protected and above the milling area. We have about 365 possibilities to adapt your CNC machining center exactly to your workpiece and material. The basic machine can be extended at any time. > Basic version of the CNC machining center - Cabin with sliding doors, automatic opening, pneumatic - High-performance CNC control NUM Flexium+ with hand terminal (nPad) and 19`` graphic screen - Tool changing system with 13 places, can be loaded from the outside - bellows for dust protection on the Z-axis - cooling unit

Condition: used, Year of construction: 1991, BJ 1991 Load capacity: 2.000kg Bantnqvzvpb Boom 6.100mm Height: 5.170mm Main and fine lift Travel drive drive trolley last test: 06/2022 8x available

Condition: new, Dittel F 20971 Built-in balancing head 829-5-10 , serial no. according to photo ,unused with traces of storage, 100% functional Hqtvqjil

mileage: 499,000 km, year of first registration: 1,990, month of first registration: 1, fuel type: diesel, color: other, axe configuration: 4x2, wheelbase: 3,700 mm, driver cabin: sleeper cab, suspension: steel-air, Condition: used, Year of construction: 1990, machine/vehicle number: 34-BSN-5, Equipment: Crane,

Condition: excellent (used), Year of construction: 2007, Data: Machining range in 5-axis operation: P-S-F (25-10) X/Y travel, mm: 3,000 x 1,500 Z travel, mm: 950 Rotary axes C/A: 540°/360° Rapid traverse linear axes X/Y: 60 m/min (110 m/min opt. linear drive) Rapid traverse linear axes X/Y - optional: 30 m/min Ekuj292f Rapid traverse linear axis Z: 30 m/min Rapid traverse rotary axes A/C: 12,000°/min Positioning accuracy: ± 0.03 mm with glass scale (Heidenhain) Repeat accuracy: ± 0.03 mm with glass scale (Heidenhain) High-frequency milling spindle: 11 kW continuous operation (S1) Nominal speed: 30,000 rpm Tool holder: HSK 40 E CNC control: digital servo drives/multiturn system Tool change magazine: dust-tight 24 magazine slots Electrical drive: digital servo drives/multiturn system Mechanical drive: ball screw spindle Machine weight: approx. 4,000 to approx. 6,500 kg Max. Max. load: approx. 300 kg Construction: rigid, vibration-absorpt. construction Central lubrication: automatic Vacuum pump: 60 m³/h Reference run not recorded as dgt. Multiturn drives Control: NUMpass HMI

Condition: used, Q 500 m³/h H 13 m P 30 kW / n 1450 r/min max. 10 bar max.105 C° Nr. 478649 9204 Cfj3rcleuj

Condition: used, Year of construction: 1991, Pressure capacity: 10 bar volume capacity: 5000 l/min motor capacity: 37 kW voltage: 380 V dimensions L x W x H: 0,9x0,7x1,5 m Equipment: - air cooling - suction opening = 500x400mm On sale as is, without test. S8vyzqj70 Can be used as spare parts dispenser if necessary.

Condition: new, machine/vehicle number: bmsf125,

year of first registration: 1,992, month of first registration: 5, overall weight: 34,000 kg, fuel type: gasoline, color: blue, axe configuration: 3 axles, fuel: regular/benzine 91, suspension: steel, Condition: used, machine/vehicle number: 802113,

Condition: good (used), Year of construction: 1992, machine/vehicle number: 10-166, OFFER 13467 Technical data: G7sec230q - max. material thickness at 40 kg/mm² strength approx. 3 mm - shaft reception 45 mm - manual hydraulic feed of the top roller - E. foot switch - drive 400 V / 1,1 kW - space requirement approx. W 550 x H 1200 x D 1200 mm - weight approx. 180 kg

Condition: good (used), -1Pc. Hein Lehmann Liwell Flip-Flow screen. Type : LS F 1.0-10 . L x W : 2.100 x 1.000 mm. . Mach.No.: 813 . Kom.-Nr. : 523791 . Included: Frame with stainless steel funnel, Electrical motor and Rubber springs . Dlaaid Vibrating screen will be overhauled, sandblasted and painted.

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 1.5 kW 2910 rpm Bdafd0hlui -Max. Delivery rate: 23.6 m³/h -Max. Pressure: bar -Max. Temperature: 100 °C -Number: 1x pumps available -Dimensions: 250/300/H755 mm -Weight: 60 kg

Condition: used, grinding length 1000 mm grinding width 300 mm Ra8hf workpiece height 230 mm table surface area 1000 x 240 mm x-travel 1000 mm y-travel 270 mm z-travel 350 mm grinding wheel diameter 240 mm grinding spindle speed 2180 U/min table speed -stepless- 3 - 30 m/min total power requirement 4,5 kW weight of the machine ca. 2,8 t dimensions of machine L x W x H 2,36 x 1,37 x 2,0 m Accessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachment

Condition: new, machine/vehicle number: bmsf125d,

Condition: used, Year of construction: 2010, Gostol DP 10-F-OR-2900 bowl lift suitable for Escher bowls lifting height approx. 290cm Fzplzmfl total height 420cm dough scraping unit safety cage max. 1000 kg lifting weight year of build 2010 pictures BEFORE reconditioning

mileage: 1,100 km, year of first registration: 2,013, month of first registration: 5, overall weight: 38,000 kg, color: white, maximum load weight: 31,180 kg, tire size: 425/65r22,5, driver cabin: other, gearing type: other, suspension: air, Condition: used, machine/vehicle number: 83572, Equipment: ABS,

Condition: refurbished (used), Manufacturer: Steinert Type: NE 150 230 E 5013 10 F Belt widthness: 1.500 mm (New belt) Se9vp Included: – New Control-unit Eddy Current Separator is overhauled, sandblasted and painted.

Condition: used, machine/vehicle number: 550171, Traces of use: No till slight traces of use Cjkv8gku7o Guarantee in months: 12 Ways: 5/2; 4/3; …: 5/3 Manufacturer: Festo Product condition: Used from old stock Voltage: 24 V DC Pressure Range: 0 - 10 bar / 0 - 145 psi Item No.: 550171

Condition: good (used), Year of construction: 1972, Compressed air-operated table spot welding machine Fabr. As LEX type F 82-1/ZG Masch.# 6693320 built in 1972 Nda02 Technical data: Nominal power 50% ED 10 kVA KVA continuous 7.0 High short-circuit power 42.2 kVA Maximum welding power 33.7 kVA KVA power 25.3 Number of control level 10 Stepless stroke 40 mm Electrode force of 5 - 90 kgf RADIUS 190 mm Arm distance of min/max 118 mm Performance sheet steel 2.5 + 2.5 mm Performance brass 1.5 + 1.5 mm Performance aluminum 1,2 + 1,2 mm Performance steel 8.0 + 8,0 mm Weight approx. 110 kg External dimensions approx. 1010 x 690 x 1120 mm with Asynchronously four times ECU ZG 1-2 setting the retention time, subsequent hold time, open time -Water rear cooling unit -Foot switch needed, despite year of manufacture in good condition

Condition: used, Year of construction: 2010, Gostol DP 10-F-OR-2900 bowl lift suitable for Escher bowls Cia99xmzbo lifting height approx. 290cm total height 420cm dough scraping unit safety cage max. 1000 kg lifting weight year of build 2010 pictures BEFORE reconditioning

Condition: excellent (used), decolier DIMECO 2310-F sheet unwinder 200kg.thr roll max width: 200mm roll diameter 200-1000 mm roll weight max: 200kg manual operation - can be motorized machine dimensions Dvlvobr length: 900 width: 1100 height: 1300mm weight: approx. 280 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank Here we offer you a used deep bridge of the manufacturer Dexion for purchase. Delivery time: approx. 10 - 15 working days Technical data of the deep bar: 01x depth bar, second-hand Material colour: sendzimir galvanised Total length: approx. 1,117 mm matching f. Upright depth: approx. 1,100 mm Material thickness: approx. 2 mm Clear span: approx. 1,000 mm Profile dimensions: C 50 x 40 x 12 mm cross beam support: approx. 50 mm Weight/ piece: approx. 2.981 kg Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet Gv8lhg (without unloading)

Condition: used, Year of construction: 2013, Used machine Year of construction 2013 Single-sided edge banding machine Joint trimming unit 2 x 2.2 kW 200 HZ Gluing unit A3 Trimming unit chamfer/straight 2 x 0.18 kW Trimming unit 2 x 0.27 kW counter rotation Profile scraper Dm3zob Surface scraper VKNR 5820 Feed rate 8 m/min Electric control Easy Control EC 10+ Workpiece width min: - for workpiece thickness 12-22mm ¦ 70 mm* - for workpiece thickness 23-40mm ¦ 120 mm* *Depending on the workpiece length Workpiece protrusion ¦ 38 mm Workpiece thickness ¦ 8 - 40 mm Max. edge height = workpiece height ¦ + 5 mm Edge material roll ¦ 0.4 - 3 mm Edge cross-section max: - for PVC ¦ 135 mm² - for veneer ¦ 100 mm² - Max. roll diameter ¦ 830 mm - Edge material strips ¦ 0.4 - 3 mm Edge cross-section max: - for strips ¦ 165 mm² L x W x H 3672 x 1454 x 1982 mm Availability: at short notice Location: Solingen

Condition: good (used), Year of construction: 2016, Edgeband thickness max 3 mm Edgeband height max 55 mm Thickness of coiled edgeband max 3 mm Workpiece width min 70 mm Feedrate max 11 m/min Preheating zone Glue system granulate glue pot below feeding chain Quick-change glue pot Trimming saw 2 motors Flush/radius/chamfer milling units 1 Scraper unit Profile scraper Buffing unit Magazine for single strips Aggregates actuated by control pneumatic Type right-side machine Quick-change aggregate(s) Machine length 3.507 mm BRANDT A 3 Gluing unit Control BRANDT EASYTOUCH Weight 700 kg Lvhhzdrr2t CE marking

Condition: excellent (used), Year of construction: 2009, Edge banding machine Manufacturer: Brandt Type: KDF 210 Year of manufacture: 2009 edge thickness: 04 - 3 mm workpiece thickness: 8 - 50 mm feed rate: 10 m/min power: 9 kW weight: approx. 1.100 kg Machine length: 3.780 mm Jfgjlyh Joining unit: Yes Crosscut saw unit: Yes Flush milling unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: reconditioned (used), The machine is suitable for milling of edging materials with max. R2 on furniture parts. The milling motor is mounted on 2 movable carriages, which is pneumatically operated in Y- and Z-axis. The sensing rollers ensure an exact distance of the form to the workpiece. Btqk8syxk8 year of manufacture: 1990 electrical connection: 230 V pneumatic connection: 3/8 1 piece form cutter with inserts for chamfer milling 30° 1 piece form milling cutter with inserts for radius milling

Condition: excellent (used), granules gluing unit 3 rolls pressing unit pre-cutting knive precise cutting saws milling unit with radius tools T7ehzy3vf profiled scraper

Condition: used, Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 KM 35 -Number: 1x milling unit available -Price per piece Pfpb7 -Dimensions: 510/430 / H570 mm -Weight: 62 kg

Condition: used, Year of construction: 2006, Used machine Year of construction 2006 gluing up to 3 mm, also solid wood Gluing unit with glue pot and glue roller cross-cut with 2 motors; high precision due to pulling cut and linear guide Multifunctional trimming unit Drawing blade unit Modern line control precise and robust chain track and feed chain feed speed 9 m/min Workpiece thickness 8 - 50 mm Edge thickness 0.4 - 3 mm Roll cutting max. 3.0x45/1.0x55 mmm Machine length 3450 mm connected load 3.5 kW Pneumatics 6 bar Suction diameter 3 x 60 mm S2t8l Weight 800 kg Availability: short term Storage location: Hochheim

Condition: good (used), Year of construction: 2009, Machine ready to work , possibility of testing C33y8syg

Condition: good (used), Postformingmaschine Fabrikat Brandt Type PF 10 Fuool9pv0 Werkstückdicke max. ca. 200 mm Werkstückdicke min. ca. 16 mm Werkstücklänge 1800 - 4200 mm Druckschiene Gesamtanschluss 12 kW Abmessungen ca. 6250x2550x2050 mm (LxBxH) Gewicht ca. 3800 kg

Condition: excellent (used), Year of construction: 2005, SITRANS F M MAGFLO MAG 5000 Electromagnetic Flowmeter G0sp39f Siemens Sitrans F M MAG 1100 stainless steel measuring tube Description The SITRANS F M MAG 5000 is a microprocessor-based transmitter engineered for high performance, easy installation, commissioning and maintenance. The transmitter is truly robust, cost-effective and suitable for all-round applications and has a measuring accuracy of ± 0.4% of the flow rate (incl. sensor). Accuracy 0.4 % ±1 mm/s Input / output 1 current output 1 digital output 1 relay output Communication HART Display Background illumination with alphanumeric text, 3 x 20 characters Enclosure IP67 (NEMA 4x/6) IP20 (NEMA 2) Power supply 12-24 V a.c./d.c. 115-230 V a.c. Ambient temperature From -20 to 50 °C (-4 to 122 °F) Approvals MI-001 Danak PTB OIML R49 Ex-approvals FM/CSA Class 1, Div 2 FM MAG 1100 Size DN: 50 (2in.) Lining: PFA Cal. Factor: 2.08345962 Ps Max: 20 bar / 290 psi Ps Min: 0.02 bar / 0.290 psi Ts Max: 130°C Ts Min: -30°C Input: 60V max, 0.12A max Year of Mfr.: 2005 Condition Notes: Scratches & Scuffs - Item is Unused.

Condition: excellent (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank Here we offer you a used deep bridge of the manufacturer Dexion for purchase. Delivery time: approx. 10 - 15 working days suitable for I-profile trusses Technical data of the deep bar: 01x depth bar, second-hand Material colour: sendzimir galvanised Total length: approx. 1,117 mm matching f. Upright depth: approx. 1,100 mm Material thickness: approx. 2 mm Clear span: 1.000 mm Profile dimensions: C 50 x 40 x 12 mm cross beam support: approx. 50 mm Weight/ piece: approx. 2.981 kg Our services at a glance: (prices on request) Mounting, construction L98emcdj our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: used, Year of construction: 1994, Brandt make Type FP 10 Year of manufacture 1994 Machine No. 0-260-03-5313 Number of spindles 1 workpiece thickness max. 55 mm workpiece width min. 80 mm profile depth max. 80 mm Inner radius min. 10 mm Edge material thickness max. 3 mm Milling motor 0.5 kW / 27,000 rpm. Pneumatic workpiece clamping Plastering machine with cloth disc B8lbfmew Dimensions L x W x H mm 850 x 650 x 1430 Weight approx. 120 kg Total connected load 0.5 kW

Condition: new, Year of construction: 2023, Planetary mixer mixer Model: PL 10 Oeotl sophisticated technology ... already proven many times! simple manual operation 3 transmission gears 1 stainless steel kettle 10 liters 1 flat beater 1 dough hook 1 broom Boiler protective grille / access protection Table machine with bowl lift Connection 220V, 550 watts DGUV V3-tested TOP quality and price in one machine! NEW machine exhibition machine Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: good (used), Technical data for the deep bar: Manufacturer: SSI Schäfer Included in delivery: 01x depth bar, used Material color: grey total length: approx. 1.108 mm Bbwbesrsjki f. depth of upright: approx. 1.100 mm clear span: approx. 999 mm crossbeam support: approx. 55 mm profile dim.: CS 190 x 75 x 13 mm material thickness: approx. 2,00 mm weight / pcs.: approx. 8,020 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Year of construction: 2023, Dough kneading machine Model: MBT SP 10 Protective grid with shutdown Table machine Ystwhc Spiral kneader for max. 10 kg of dough Infinitely variable speed DGUV V3 tested Connection 220V, 400 watts Dough machine NEW with 12 months warranty Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: new, Year of construction: 2023, Dough kneading machine Model: SP 10 Protective cover with shutdown Table machine for max. 6 kg of flour Spiral mixer for max. 10 kg. Dough Infinitely variable speed DGUV V3 tested Connection 230V, 400 Watt, 2 Amp. Weight 35 kg. Dimensions: 300 x 510 x 450 mm, WxDxH Dough machine NEW with 12 months warranty Suzx3s Come to our large bakery machine park!

Condition: used, Gear motor, electric motor, stop motor, drive motor S0xam3kyp -comes from a Homag double-sided edge banding machine -Power: 3.2 kW -Speed: 2850 rpm -Construction: B5 -Shaft: Ø 28 mm -Protection class: IP54 -With external fan: 0.05 kW 2520 rpm -Dimensions: 440/240/H210 mm -Weight:

Condition: new, Welding head Trumpf F=200 TCL1005 3D Ftgjcpxu