Mandrel tube bending machine

BLM B42 CNC

Condition: used, Year of construction: 1998, grinding length 2000 mm Gbodpfxev S Ip Ee Actjw grinding width 600 mm total power requirement 17 kW weight of the machine ca. 10 t

Condition: good (used), Year of construction: 2009, functionality: fully functional, Travel distances Max. grinding diameter: 500 mm Max. grinding length: 2000 mm Max. workpiece weight: 500 kg between centers Gedsy Idtqjpfx Actebw Swiveling of grinding head: +45 / -15° (manual) Grinding wheel: 500/80/203 mm Accessories: - Steady rest - Enclosure A video of the machine under power can be provided upon request.

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Gedpfx Acow U A Rmotebw Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Godpfxsdzp Tce Actsbw Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Gbjdpfey U N Hiox Actjw Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: excellent (used), Polish production Rafamet lathe for sale, efficient machine in good condition after employing electrics and management by Rafamet. The machine worked until the very end, currently disassembled loading machine. Technical data Track width (for normal version) - 1435 mm Track width (for special execution) - 1524 or 1676 mm Wheel diameter - 800-1500 mm The minimum distance between the axes of the sets - 1500 mm Maximum axle clamping on the rails - 25 tons Rotation of drive rollers (stepless) - 15-82 rpm Circumferential speed of drive rollers - 7.5-43 mm/min Feeds of copying supports (stepless) - 0.95-34 mm / min Travel of external jacks - 540 mm/min Travel of hydraulic jacks - 410 mm/min Slide travel - 2300 mm/min Sliding rail travel - 9000 mm/min Gbedpfx Acjmidwcjtsw Weight including standard equipment 25 200 kg Installed power 83kW (after modernization 58kW)

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Gedpswl Iw Ujfx Actsbw

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Godpjuqdi Uofx Actobw Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Godpsnvfdusfx Actsbw

Condition: used, Year of construction: 2008, operating hours: 134,157 h, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,300 mm, feed rate X-axis: 55,000 m/min, feed rate Y-axis: 55,000 m/min, feed rate Z-axis: 55,000 m/min, total length: 12,200 mm, table width: 2,050 mm, total width: 8,000 mm, total height: 7,800 mm, rapid traverse X-axis: 55 m/min, rapid traverse Y-axis: 55 m/min, rapid traverse Z-axis: 55 m/min, position of the milling head: vertikal, torque: 32 Nm, tool weight: 6,000 g, control cabinet length: 600 mm, control cabinet height: 2,200 mm, control cabinet width: 3,600 mm, tool diameter: 100 mm, As a manufacturer, we are pleased to offer you this portal milling machine from FOOKE GmbH. This machine combines dynamics and precision in a perfect way, making it the ideal choice for machining large components. X = 7,500 mm x Y = 3,500 mm x Z = 2,300 mm Swivel milling head 5 with CNC-controlled A and C axes Compressed air supply to the milling head High-frequency milling spindle (HSK63A, 24,000 rpm, 32 kW) CNC control HEIDENHAIN iTNC 530 (refurbished in 2015) Linear motor drives in the X, Y, and Z axes Gedpfx Aoz Da Tmjctobw Exclusive machine table Machine dimensions: Width approx. 8.00 m Depth approx. 12.20 m Height approx. 7.80 m Weight approx. 120 tons Machine operating hours: 134,157 Spindle operating hours: 36,706 Contact: Do you have any questions or need further information on a customized retrofit? Then please send us a message via the platform or call us. As a manufacturer, we look forward to assisting you!