BEYELER HYDRAULIC BENDING MACHINE 3000X100 T

BEYELER

Condition: good (used), Year of construction: 1998, pressing force: 150 t, stroke length: 215 mm, working length: 3,100 mm, Completely rebuilt machine. New Cnc: Step Automation Rock 15 (Touch Screen and 2D) Bending length: 3100mm Force: 150tn 6 axes (Y1, Y1, X, R, Z1, Z2) Travel/Travel: 215mm Gksdpfjuc Txzsx Ahdsc Delivered with complete set of 3 meters of punches and dies. *Machine in the process of retrofitting, new cnc to be installed.

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Gkedpfx Asx Ew Dqshdoc Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Type PR10 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Gksdpfxjz H Udls Ahdsc Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Condition: used, Year of construction: 1978, Hydraulic Shear SAGITA BEYELER 3100 x 4 mm Cutting length: 3100 mm Maxi thickness: 4 mm Electric Back gear gauge travel: 1000 mm Throat depth: 300 mm Year of construction: 1978 13 hydraulic sheet-metal clamps Blue electrical cabinet not used because it was used for the rear sheet metal conveyor There is a slight hydraulic leak at the left cylinder Supplied with a new replacement blade + front stop Voltage: 380 V Length: 3700 mm Depth: 2400 mm Gkjdez Nfxgspfx Ahdec Height: 1500 mm Weight: approx 5 T

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface Gsdpfx Asxacfmshdokc - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: used, Year of construction: 1990, Technical details: pressure: 100 t Gkedpfju Icdasx Ahdsc chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch table-size: 3100 x 60 mm work height max.: 890 mm connection voltage: 3x380 V / 50 Hz V total power requirement: 5,5 kW weight of the machine ca.: 7,9 t machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit incl. accessories in stock i.D. *

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Gksdpfsz Hwhmex Ahdsc Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel Gkodpfxovxwqfj Ahdoc 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Year of construction: 1997, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 150 ton Gjdezz Tykjpfx Ahdskc THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm UPPER BEAM TRAVEL: 415 mm MOTOR POWER: 15 kW CONTROL UNIT: CYBELEC DNC 900 WEIGHT: 12800 Kg OVERALL DIMENSIONS: 4000 x 2400 x 3200 mm ACCESSORIES: HYDRAULIC TOOL LOCKING ; HYDRAULIC CROWNING

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Gjdpfozbhh Rjx Ahdokc Type PR6 150 4100 Capacity: 4100 x 150 tons Cybelec DNC 880S Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a set of tools.

Condition: new, table length 2400 mm table width 1200 mm 4000 kg height of stroke 510 - 1550 mm total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Gkedpfx Ahjwz Rubedsc Side panels 150 x 10mm Ribbed bottom for reinforcement.

Condition: ready for operation (used), Year of construction: 2001, pressure 100 t chamfer lenght 4100 mm distance between columns 3700 mm column arm 415 mm stroke max. 215 mm dayligth 410 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 150 mm/sec work height max. 1080 mm table width 100 mm Control CYBELEC oil volume 160 ltr. voltage 400 V power capacity 8.5 kW weight 10200 kg range L-W-H 4800 x 1800 x 2600 mm Gkjdpsxzuwkofx Ahdoc - in checked conditions - machinevideo - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls - 2x freely movable foot switches - Operating instructions for control system

Condition: excellent (used), functionality: fully functional, Number of axes: 6 Maximum bending length: 4100 mm Bending force: 200 tons Bending thickness: 6 mm Stroke: 215 mm Godpoyizidefx Ahdokc Maximum approach speed: 200 mm/s Power: 15 kW Weight: 15,600 kg

Condition: used, functionality: fully functional, ---IMAL hydraulic press brake, 3000 x 85 tons (red and white), 4 axes, 500 mm throat depth. Dimensions: 400 x 180 x 260 (H) cm, weight 7,000 kg (70 cwt). Gkjdpfx Ahowyndwedsc

Condition: good (used), functionality: fully functional, Year of construction: 2002, Equipment: CE marking, type plate available, Model VR 13/3000 with numerical control, motorized back gauge, blade spacing adjustment, angle adjustment, and rear sheet metal support. Gsdpszrzkxofx Ahdokc