Hydraulic cnc press brake 4100x450tn

Axial PHSW-454

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 20440067, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: DAVI GENIUS, number of rollers: 4, roller (bottom) diameter: 170 mm, roller (top) diameter: 200 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 25 mm, working height: 700 mm, sheet thickness (max.): 14 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 4,000 kg, total length: 3,700 mm, total width: 1,050 mm, total height: 1,450 mm, power: 4 kW (5.44 HP), input voltage: 380,460 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, DAVI 4 ROLL 2000X10 MM MODEL MCB2020 _CNC GENIUS -YEAR 2004 MACHINE USED IN REGULAR WORKING CONDITION Capacity: Dcjdpfjyh Aqwjx Abwjf -Width of plate: 2000 mm -plate rolling thickness 10 mm -plate pre-bending thickness 8 mm Rollers surface length 2050 mm upper roll 200 mm pinch roll 180 mm side rolls 150 mm Configuration installed: Surface hardening of the four rolls Conical bending hydraulic attachment - hardened pad. Central rollers powered driven rotation with gear unit & hydraulic motor individual Calibration system for re-rolling of welded shells rounding. Console electric centralized commands joysticks with screen readout CNC DAVI GENIUS Opening front side hydraulic drop-end to unload closed shells. Variable speed or rolling Safety installation with emergency stop. CNC controller Davi Genius , programmable for automatic plate roll. digital readout of the 4 roller on screen. Dimension 3700x1050 x H 1450 mm - weight 4 ton Voltage 380 / 415/440/480 Vac - Hz 50 / 60 User manual, service manual, cnc manual, with the machine

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Dcodpswaauuofx Abwef Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Condition: new, punches and dies for EHT press brake Dcodpfx Abjiq Dnkowef

Condition: used, Type: C280-35L Pressure: 280 T Working length: 5.300 mm Technical characteristics: HYDRAULIC Dcsdpfxj Du Txs Abwef New hydraulic and electric systems

Condition: excellent (used), Year of construction: 2007, Amada AC 2510 NT CNC Turret Punch Year 2007 200kN force, 51 tool stations Country of Manufacture: Japan Bridge Type 20 tonnes (196kN) Press Type AC Servo Drive Axis Traverse Distance 1270 x 2500mm Workable Maximum Sheet Size 1270mm x 5000mm (with auto repositioning) Fully serviced with Amada uk. Max. Material Thickness 6.4mm mild steel Max. Hole Diameter 88.9 mm Max. Material Weight 150 kg No. of Stations 24 A up to 12.7 mm 18 B up to 31.7 mm 3 C up to 50.8 mm 2 D up to 88.9 mm 3 AI up to 31.7 mm 1 AI up to 50.8 mm Axis Speed (X, Y) 100 m/min Hits Per Minute Turret Speed Bi-Directional 30 R.P.M Punching Accuracy 0.1 mm (incl 1 reposition) Ram Stroke Length 41 Tool Lubrication Axis Drives Electric Power Required 19 KVA Air Pressure Required 5.0 Kgf/cm2 Air Flow 500 l/min Djdpfx Aowgb E Ujbwocf Machine Length 4165 mm Machine Width 5120 mm Machine Height 2082 mm Machine Weight 13000 kg AMNC-F windows based network control 15″ Colour LCD touch screen

Condition: new, Load Weight Shelf 28000 kg Loading weight per level 2000 kg Number of load levels 2 x 7 Stk. Recommended material length 6000 mm Dcedofgyhaopfx Abwef Column width 3000 mm Shelf height 2440 mm dimensions 3,7 x 2,55 x 2,4 m

Condition: good (used), functionality: fully functional, Year of construction: 1998, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 18,400 kg, total length: 4,400 mm, total width: 2,350 mm, total height: 2,250 mm, cutting length (max.): 4,100 mm, Equipment: finger protection, safety light barrier, Cuttinglength: 4.100 mm Cutting thickness: 13 mm Back gauge: 1.000 mm Control: Darley Delem Featured with: - Sheetsupporters frontside 4000 mm - Footpedal - Material conveyor - Extra sets knives - Documentation Country of origin: The Netherlands Motor power: 30 kW Dsdpfx Abjwc Sahewocf Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18.400 kg

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Dcodpfx Aet Tqkdsbwsf Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 10x3200 SMO-3210-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 10.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 12 - Backgauge retract distance: 600 mm - Motor power: 15.0 kW - Length: 4000 mm - Width: 1800 mm - Height: 2100 mm - Total mass: 8400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. Dcsdpoiukw Tefx Abwef E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, Lvd PPEB 110/20 MNC 95 Sheet metal bending machine Good condition Includes machine manual Machine weight: ca.9480 kg Width: 3600 mm Length: 2700 mm Height: 3000 mm Dcedpfev Er T Usx Abwjf