Press brake

ATLANTIC HPE 40400

Year of construction: 2000, Condition: used, pressure 230 t chamfer lenght 5000 mm distance between columns 4050 mm 800 mm 500 mm 300 mm 600 mm BC 45 Grafik 18,7 kW 22,0 t 6,0 x 2,2 x 3,75 m Ncolhcdoh Dxw Usw Ijr - 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t Ncslhcdwsu Rni Hs Ijr dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Equipment: -with side stop L: 1000 x W: 100 x H: 60 mm and stop bar 990 mm, with 8 supports -Operation via control panel and foot control -Cutting zone lighting -stroke counter *

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard Ncelhsu Uwyyjcdw Isr - 2x emergency stop buttons at the front

Condition: excellent (used), Year of construction: 2018, operating hours: 62 h, Functionality: fully functional, resolution (max.): 1,200 dpi, Equipment: cooling unit, The Atlantic Zeiser DBNL (Digital Blister Near Line) was used as a demo machine and has only run for a total of 62 hours. Some of the original protective film is still present. The machine can be tested on site. The printing machine prints with inkjet on foil or aluminum foil, intended use is the pharmaceutical sector. Included is the matching cooling unit and the print head (monochrome) More pictures in full resolution on request. English: Ncslhcdjrk Rnkew Ijr The Atlantic Zeiser DBNL (Digital Blister Near Line) was used as a demo machine and has only run for a total of 62 hours. Some of the original protective film is still present. The machine can be tested on site. The printing machine prints with inkjet on foil or aluminum foil, intended use is the pharmaceutical sector. Included is the matching cooling unit and the print head (monochrome) More pictures in full resolution on request.

Condition: good (used), Year of construction: 1993, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness steel (max.): 13 mm, cutting length (max.): 3,050 mm, motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Ncslhsv Tk Efjcdw Isr Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: CDL 184, Atlantic Zeiser Card Line - CDL 184 machine for card personalization. It is configured with following components: Ncolhjuv E Hgocdw Ior Kora Packmat card feeder with extension belt Videojet BX 6500 Hi Speed ink jet printer Camera for personalization verification Hot stamping module Labeler for scratch off labels Camera for scratch field verification Reject bin Exit conveyer The Machine can print cards in ISO size 85x 54mm and in 85x133mm Multi Pin cards also Product samples shown In working condition, can be seen in production

Condition: used, Year of construction: 1993, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 6.0 mm cutting angle 0.5 - 3.0 ° down holder 18 Stück no. of strokes 9 - 17 Hub/min back stop - adjustable max. 1000 mm Control konv. work height max. 930 mm engine output 22.0 kW weight 8000 kg Nelot Smfzjhcdw Iocr range L-W-H 4150 x 2020 x 2240 mm Equipment: - electro-hydraulic / slide-guided sheet metal shears - front control panel, pivoting - front left - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, adjustable from behind - electro-motorized rear stop 10-1000 mm * 2x stable guide arms (with guides and drive spindle) * stop rail adjustable in parallel * with analog position display + handwheel for fine adjustment * display on a counter up to 0.1 mm - 1x side stop - 1x freely movable foot switch - front finger guard - operating instructions (PDF)

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Nelhou Icpcecdw Iecr Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 12 mm distance between columns 3100 mm table height over floor 900 mm cutting angle adjustment 0,5 - 3 ° no. of strokes 6 - 13 Hub/min back stop - adjustable 1000 mm down holder 18 St Ncjlhcdweu Uu Smj Ier oil volume 350 l total power requirement 22,5 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives

Condition: good (used), Year of construction: 2016, Functionality: fully functional, We request your binding offer. Technical specifications: • Machine is functional, assembled, and ready to test. • UV printing system with two OMEGA 36i high-end UV inkjet printing modules and Piezo DoD technology, including rotary encoder, software dongle, two SmartCure Air LED-based UV curing units, air-cooled UV LED drying technology, and a 19" industrial PC version for the Basix minicontroller. Nolev Iy U Sjhcdw Ijcr Available from: immediately Delivery terms: ex works (Brandenburg) Payment terms: Payment before pickup. Accessories are not guaranteed. The following applies: "Item sold as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 6 mm distance between columns 3460 mm table height 800 mm 0 220 bar cutting angle adjustment 0,5x3 ° down holder 18 back stop - adjustable 750 mm front stop - adjustable 1000 mm main drive 7,5 kW oil volume 300 l total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7x2,0x1,8 m Ncolhcjvxwmyodw Ior cutting angle adjustment manually blade gap adjustment manually angle stop

Condition: good (used), Year of construction: 2004, card printing machine Nsljp R Nrxjhcdw Iocr

Condition: used, Year of construction: 1992, sheet width 3050 mm plate thickness 6.0 mm cutting angle 0.5 - 3.0 ° down holder 18 Stück no. of strokes 9 / 14 Hub/min back stop - adjustable 750 mm Control SC7p engine output 10.0 kW weight 4800 kg range L-W-H 3750 x 1600 x 2450 mm Nslhcdwsriiqdj Iecr from a maintenance workshop well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - "backdrop-guided" - ATLANTIC NC control unit - model "SC7p" * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Finger protection at the front - EMERGENCY stop button at the front - rear sheet metal slides - User manual (PDF) * Machine link: ?machineno=1008-9325328

Condition: good (used), Hydraulic pump, oil pump, gear pump, press brake, folding bench, folding machine, hydraulic punch, hydraulic punch -Spare part: Hydraulic pump from Atlantic press brake type: HPT 13536 -Manufacturer: Eckerle Ncelhjfpidiecdw Ior -Pump type: 1PF2GH3-12/013RE07MU2 -Drive: Loher type 132M-4 -Power: 7.5 kW 1440 rpm -Dimensions: 800/370/H300 mm -Weight 98 kg

Condition: used, Year of construction: 1997, sheet width 3050 mm plate thickness 6 mm distance between columns 3100 mm back stop - adjustable 750 mm cutting angle adjustment 0,5 - 3,0 ° no. of strokes 9 - 17 Hub/min Ncelhsvh Nakscdw Isr table height over floor 775 mm total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of machine L x W x H 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Nelevy H Iiehcdw Ijcr Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, total height: 2,800 mm, back gauge travel distance Z-axis: 750 mm, pressing force: 175 t, total width: 2,300 mm, total length: 3,400 mm, throat depth: 300 mm, overall weight: 11,000 kg, operating speed: 200 mm/s, distance between stands: 2,600 mm, bending length: 3,100 mm, throat depth of stand: 300 mm, type of input current: three-phase, input voltage: 400 V, Hydraulically controlled press brake ATLANTIC HPT 175/30, control ATL 550, split block die and punch, max. pressing pressure 175 tons, controlled stop, max. operating pressure 235 bar, motor power 15 kW, weight approx. 11 tons, Ncjlhjvyr Iujcdw Ijr

Year of construction: 1989, Condition: good (used), machine/vehicle number: 56089, Pressure: 135 t Working width: 4100 mm Clear distance between columns: 3150 mm Stand projection: 250 mm max. installation height: 310 mm Working speed: 7 mm/sec Return stroke speed: 50 mm/sec Njlhenzhvkjcdw Iecr electr. Connection: 400 V, 11 kW Weight: 10.8 tons Required space: 4250 x 1800 x 2400 mm

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA Ncelhcdjvx Uw Ajw Ier no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm Equipment: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 8 * Pre-selected positioning from the back stop * Digital display of the actual value * electro-hydraulic cutting angle adjustment with digital display * programmable retraction from the back stop * programmable cutting length limitation * EMERGENCY OFF switch - NC electro-motorized back stop, on ball screws - manual cutting gap adjustment, adjustable from the front - finger protection at the front - 1x side stop .. 1,000 mm - 2x front support arms - protective device behind the machine - rear sheet metal slide - 1x freely movable foot switch - original operating instructions

Year of construction: 1992, Condition: good (used), machine/vehicle number: 92063963, Offer 22588 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - cutting angle adjustable mot. 0,5 - 3 °. - cutting gap adjustment by hand - number of hydraulic hold-downs 18 pcs - mot. backgauge 10 - 750 mm Nelhcdwoipmi Us Iecr - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - hydraulic drive 400 V / 7,5 kW - table height 770 mm - Space requirement incl. backgauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - weight approx. 4500 kg - with: - E. - foot - switch - cutting line lighting

Condition: not inspected (used), Year of construction: 1990, Functionality: fully functional, machine/vehicle number: Serie Nr. 56282, total height: 2,400 mm, total width: 1,800 mm, total length: 4,000 mm, overall weight: 8,500 kg, Equipment: type plate available, ATLANTIC HPA 30-135 / Good condition -Pressure force 135 tons -folding length 3050mm -Clearance between the uprights 2550mm -Motorized height adjustment -automatic backgauge Nolhceu Ni Izjdw Iecr -Foot switch / hand switch -ready for demonstration under power

Condition: good (used), Year of construction: 1997, Functionality: fully functional, total height: 2,280 mm, back gauge: 500 mm, installation height: 325 mm, pressing force: 135 t, total width: 1,700 mm, total length: 3,500 mm, throat depth: 250 mm, overall weight: 7,800 kg, distance between stands: 2,600 mm, bending length: 3,000 mm, We are selling a hydraulic press brake with the following equipment Ncjlhcdsvi I Snow Ior Upper tool and lower tool complete motorized back gauge motorized adjustment of immersion depth 2 support arms Two-hand operation and foot switch

Condition: good (used), HACO - Atlantic HPA 30-135 / Good condition with tools -Pressure force 135 tons -folding length 3050mm -Clearance between the uprights 2550mm -Complete upper beam / tools and separate segments in different lengths -Two dies -Motorized height adjustment -Manual backgauge -Front support 2x -Foot switch / hand switch Dimensions: LxWxH 4x1.8x2.4 meters / weight approx. 8.5 to Errors / input errors excepted Njljvdkwpjhcdw Iocr

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: Nceljt Tw Uijhcdw Ijr - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch - Cutting line lighting - Sheet support - Rear guard with protective grille

Condition: good (used), Year of construction: 1997, Functionality: fully functional, back gauge: 750 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,000 mm, overall weight: 5,000 kg, A pair of guillotine shears in good condition from the manufacturer Haco/Atlantik is for sale Equipment as follows: Ncslhevi I A Hjcdw Ior motorized backgauge hydraulic cutting angle adjustment The cutting gap is adjusted manually from the center. 3 support arms