270M-350-90U

ARBURG

Year of construction: 1996, operating hours: 24,222 h, condition: good (used), This Dr. Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 80M - Year of construction: 1996 - Screw diameter: 42mm - Shot volume: 200 cm³ Ndjdpepwh Akefx Af Sef - Clamping force: 80T - Working hours: 24,222

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, load hours: 60,790 h, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Ndedjh Tk Rvspfx Af Ssf Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Njdpfx Afjrthkue Ssdf Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: excellent (used), Year of construction: 1997, Arburg 520C-220-675 Closing 220 TO Nodpof S A R Aofx Af Ssdf Scrow 35 mm Year 1997 Tie bars wide 52x52

Condition: used, Year of construction: 2006, (2006) Arburg 420 C 800-350 DUROPLAST Clamping force: 80 ton Ndodpfeuy Sdtjx Af Ssf Screw dia: 40mm Weight 3400 kg Machine used for Bakelite production (DUROPLAST)

Condition: good (used), Year of construction: 1993, Netstal 870/1500 HP Ndedpjducptefx Af Ssf YEAR 1993 Wear strength 150 TO

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 25,000 h, machine/vehicle number: CAT09500EAYL02286, Machine in working condition. Nedpfx Asww Nv Aef Sodf

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Nsdpfxsk Rnvme Af Sodf Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Ndsdpfx Ajuh U Izjf Sof Closing 30 tons Year 1992 Scrow 32 Spray weighted 123g

Condition: excellent (used), Year of construction: 2003, Arburg 420C-800-250 Closing 80 tons Ndedpepdr Dcefx Af Sof Scrow 30 mm year 2003 Spars wide 42x42 Spray weight 97 g