Complete Resaw Line

AKE, Rosèn AKE TB2A-1400H

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Tjderqar Sspfx Ag Ijf

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Tjdek Nm Nrspfx Ag Isf

Year of construction: 1975, condition: good (used), functionality: fully functional, Peeling machine / Centering-Charging device Tjdpot D A S Isfx Ag Ief Peeling machine Angelo Cremona SFL 2700 x 1100 - 1975 Centrering and Charging device CTA 4 - 1976 Veneer unwinding Bertram - 1995 To be dismantled by buyer

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Combo - contour cutter//cutting line: TECNODINAMICA mod. KAOBAND -Cutting line for blocks of size 4800x1200x1200 (finished block size) - Tipper - Guillotine for sectioning up to 2400 mm for the pantograph - Automatic rotation of the cut block for contour cutter/pantograph Tedpsuct Szsfx Ag Ief - Horizontal cutting with automatic wire positioning - Pantograph integrated in the first station with automatic wire positioning. - Automatic lower scrap miling - Side cutting with manual wire positioning - Down cutter with manual wire positioning - Safety fences with micro switchs - PLC with INPUT/OUTPUT cards connected to the PC - Machine in excellent condition - Total length approximately 37m

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Capacity: up to 60 packs per minute Recently packed: 3x4 cardboard 4x6 cardboard 0,5 L glass bottles 0,33 L glass bottles Other formats possible Todpfx Aetq Dzhjg Ief

Year of construction: 2019, operating hours: 100 h, condition: like new (used), machine/vehicle number: oms 08 RP-TR1400, machine then cost 125,000 euros as good as new, hardly used make an offer !!! you can set up pallets of length 6 metres for strapping Tsdpjiypynofx Ag Iof

Condition: used, Year of construction: 2005, Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder Tsdpfx Aom U R Dheg Ijf

Condition: used, Year of construction: 1997, Overview The fully automatic KEG plant was manufactured in 1997 by the German manufacturer BTB. The plant cleans the inside and outside of the KEGs and fills them with a capacity of approx. 60 KEGs/h. Technical details Capacity: 60 KEG/ h for 30l DIN KEGs Formats: 10l, 20l, 30l, 50l, DIN or Euro KEGs Fittings: Micromatic flat fitting and Keggyfittng Scope of delivery Cleanomat CL5 with 4 active cleaning stations with 1 filling station Medium pressure external washer 3x supply units á 300l for mixed water, acid & lye Conveyor belts Volumetric filling system Automatic filling via volumeter Automatic filling via pressure transducer CIP cleaning of the CO2 line   Tedpfetqa Iqjx Ag Ief

Condition: used, Year of construction: 1999, Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. One will be free in June, one in October Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Tjdpfx Agsr It Stj Ief

Condition: used, Year of construction: 2016, Overview  The packer was manufactured in 2016 by the former German company Federspiel. It is located at a large German mineral well and is no longer in operation. The packer was removed at that time because it no longer met the performance requirements. Technical details Capacity: 3800 crates/h (at 0,7l)  Formats: 0,25l; 0,5l; 0,7l; 1,0l  Control Siemens S7 Multi gripper head with 2x12x8 grippers Bottle table  Bottle line-up block Tjdpfx Agjl Hx E Sj Ijf