Three-layer parquet production line

A.COSTA CARICATORE

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET Njdpfx Ahodvlcyj Nswf SECOND-HAND, FULLY RECONDITIONED

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 Nwodpfxjt Akcfs Ah Njf 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Nwsdpfxstzld Uo Ah Njf

Condition: good (used), Year of construction: 2010, Poliedra is a dryer suitable for the curing of UV lacquers on three-dimensional surfaces. In the case of spray applications, the UV dryer must also cure the product applied to the vertical edges of the panel. Superfici developed UV modules with special reflectors. The special geometry of the reflector of the "Poliedra" UV supports a uniformly UV irradiation distribution, both on the surface and on the edges. In this way, with a single lamp, inclined with respect to the direction of advancement of the pieces, lamp length 1700 mm – 120 W/cm available lamp power from 40 to 120 W/cm type of lamps gallium and mercury (new lamps) Njdpfxsmmbvtj Ah Nowf

Condition: good (used), Year of construction: 1969, Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm Nwsdpfx Ahoidckfs Nsf template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: good (used), The machine has been overhauled many new parts new cables new hydraulic station The machine has been checked, is functional, Nwodpfxev Ihdzo Ah Njf We can send a video.

Condition: new, Cefla painting system Nodpfxswhbrwj Ah Njwf

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank Nodpfex Dmdhsx Ah Nswf • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Nwodpeumrgajfx Ah Nsf Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Nwsdpfx Ahow Hfzas Nof Product description: The Easyplan is a compact yet powerful drying system designed for both softwood and hardwood drying, as well as for ISPM-15 compliant pallet and wood packaging heat treatment. It guarantees full phytosanitary compliance and consistently provides high-quality drying results across a wide variety of timber species. Installation is completed in less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automated: simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: - Electric - Gas - Hot water / steam Key benefits: - Capacities of 10 m³ or 20 m³ to match different production requirements - Suitable for both softwood and hardwood - ISPM-15 compliant pallet and wood packaging heat treatment - Fully automatic drying process - Fast installation in under 24 hours - Flexible heating solutions to suit available energy sources Easyplan is the ideal solution for companies seeking a compact, fast-to-install timber drying and ISPM-15 pallet treatment system that does not compromise on performance or quality.