Roller coater

Cefla Smartcoater MF EVO

Condition: used, Year of construction: 2019, Paint application machine with reverse-running metering roller. Application machine for primers and top coats. Dsdpfszf N Tuox Aitskp Adjustable speeds via frequency converter for transport, application roller, and metering roller. Control panel with touch screen for setting all machine parameters. - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER MF-EVO - Year of manufacture: 2019 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Paint application roller ~ 50 - 60 Shore - Application quantity ~ 4-50g/m² - Roller diameter: 250 mm - Dosing roller: 173 mm - Dosing roller with switchable reverse operation - Double diaphragm pump 1 piece - Transport system with belt - Compressed air connection: 6 bar - Mobile on flanged rollers - Feed speed ~ 4 - 20 m/min - Control cabinet on the machine, traveling with it - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Location: not in stock - Available from August 2026

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET SECOND-HAND, FULLY RECONDITIONED Djdedvlcyopfx Aitokp

Condition: excellent (used), ROLLER COATER with SINGLE SPREADING-COATING ROLLER Dodpfx Aogz Swlsitokp Max working width mm 1300 Length of the machine mm 900 (ca.) Thickness of the panels (working height): mm 3 - 80 Adjustable feeding speed: m/min 5 -20 PLC control pane (Touch Screen) Telemecanique/Schneider Built-in electric and command panel Total installed power KW 2,9 Equipped with: 1°) Dosing unit (Chromium plated Doctor roller diam. mm 173, KW 0,75 ca.) 2°) Coating unit (Rubbered spreading roller diam. mm 250 (ca.) KW 0.75, with a rubbered bottom roller, counter-placed to the top one (diam. mm 182 ca., (ca.) KW 0,75)

Condition: new, Cefla painting system Dkodpfx Aiowhbrwetsp

Condition: good (used), Year of construction: 1969, Work table Clamping area 500 x 200 mm Distance between milling spindle and work table 300 mm Longitudinal movement of the table, manual 300 mm Transverse movement of the table, manual 160 mm Template table Template table 550 x 324 mm Distance between pantograph arm and clamping area 20 mm Rotatable 360° Template slots 7 pcs., spacing 45 mm Milling spindle Spindle speeds 1,900 – 15,000 rpm Cutting speed 1 – 226 m/min Motor speed 2,800 rpm Internal taper of the tool spindle 1:5 Size of the collet bore 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Dodpfsidckfjx Aitjkp Pantograph Transmission ratio 1:1 to 1:50 Drive power 0.2 kW Dimensions Footprint L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / Special features: • 1 set of templates with letters and numbers • Stylus

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Dedpow Hfzaofx Aitekp Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Flexible heating options to match available energy sources

Condition: used, machine/vehicle number: 007960, Squaring: First and Second Pass Djdpfxewl Dnij Aitokp Max Panel Thickness: 200 mm Max feed speed: 36 m/min Distance between dogs: 450 mm

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm Dkedpfefgyigjx Aitep band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Dkodpfx Aiew Anc Eotep Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 155mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: used, Year of construction: 2003, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF - Volt. 380/50 - S/N 772 Dodpemxktpjfx Aitjkp - Year 2003