Used wood shredder for sale (340)

Condition: good (used), Year of construction: 1993, Rotor width 800 mm Bdedpfx Aep H Sv Doduok 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: excellent (used), Weima WL4 shredder, year: 2022, in excellent condition Bdsdpfx Adoxyxchsusk

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Bededwktkspfx Aduodk Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Bdodpfx Adjxyqncjuok

Condition: used, Wood shredder Weima Manufacturer: Weima Model: WL18/45 Country of manufacture: Germany Year of manufacture: 1997 Number of knives: 58 Rotor diameter: 368 mm Weight: 4000 kg Electric motor: 45 kW Included: Feed conveyors Bedpfjxyx Nnex Aduedk Vibrating conveyors Discharge belt conveyors

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, MORBARK WH3000XP chipper from 2022 in good condition. Serial number 196 1040. Bdjdpjxyiunjfx Adusk

Condition: good (used), Year of construction: 1996, 4-shaft shredder from renowned manufacturer Untha, type RS 30 Bedpoxpn Hnefx Adujdk 2 x 7.5 kW Function tested

Condition: excellent (used), CATALOG NUMBER 7769 TECHNICAL DATA - Loading hopper dimension (top, L/W): 650x240 mm Bjdpfx Asxix Szsduodk - Rotor width: 360 mm - Motor: 7.5 kW - Screen: 8 mm - Knife width: 90 mm - Number of knives: 3 rows of 4 pcs - Throughput: approx. 700 kg/h - Extraction outlet diameter: 100 mm - Dimensions (L/W/H): 1200x830x1440 mm - Weight approx.: 300 kg FEATURES – Made in Poland – Unpainted – Mobile – Very good condition – Used chipper Net price: 16,900 PLN Net price: 4,020 EUR (depending on exchange rate 4.2 PLN/EUR) (Prices may change due to exchange rate fluctuations)

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Bdeded E R D Sepfx Aduok Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SH12005, Untha LR 630 Chipper Operating Hours: 1 h Demonstration Machine Ma. No. SH12005, Year 2024 Item Number: JA_G250303 Description Feed Opening: 624 x 792 mm Hopper Capacity: 0.43 m3 Rotor Diameter: 248 mm Speed: 98 rpm Power: 400V/50 Hz, 18.5 kW Blades: 17 Screen Hole: 15-20 mm Suction Nozzle: 160 mm Weight: Approx. 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Bedpfxov Tbqle Adusdk Cable Harness: 3 m + Connection for Screw Discharge Subject to errors and changes in technical specifications. Note for new machines: • Prices are for pickup (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany - Free shipping! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping options: • We would be happy to provide you with a transport quote. • Pickup from our location in Ottendorf-Okrilla, free of charge upon request. (Assembly and instruction of the goods for demonstration purposes is optionally available upon request!) • Optionally, our trained service staff will assemble the machine at your location and provide you with a brief instruction. Travel, driving, and service times are subject to an additional charge.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Heinola chipper TT-75 RS Bodpfxjxrcgzs Aduedk year 2006 infeeding with vibra conveyor 6 m long 600 mm width + 1 year old magnetic.

Condition: like new (used), Year of construction: 2022, operating hours: 26 h, functionality: fully functional, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Bdjdpfjxyit Rex Aduek

Condition: good (used), Year of construction: 2006, Chipper with rotor width 800 mm Bodpfxsxyud Ie Adusdk Rotor diameter 368 mm with 40 knives Motor 22 kW Only 850 operating hours

Condition: excellent (used), CATALOG NUMBER 7772 TECHNICAL DATA - Top feed hopper dimensions (L/W): 440x990mm - Bottom feed hopper dimensions (L/W): 400x450mm - Rotor working width: 430mm - Main motor: 18.5kW - Number of knives: 2 pcs - Screen size: 19x19mm - Dimensions (L/W/H): 1740x960x2160mm Bdodpfx Asxix I Nodujk - Weight: 1160kg ADVANTAGES – German-made – Very good condition – Used chipper Net price: 24,900 PLN Net price: 5,920 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% Bdsdjd Hkqhepfx Adujk - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: used, Year of construction: 2016, Гидравлический кожух рубительной машины обеспечивает легкий доступ к ножу, в то время как 23 дюйма (58,42 см) Измельчение диаметра подходит для некоторых крупных деревьев. Bdedpfx Aowlf Idsduok Благодаря измельчительному диску 75 дюймов (190,5 см) модель 23 способна измельчать большие объемы древесины Длина 27 футов 4 дюйма 8,33 см Высота 13 футов 6 дюймов 4,11 см Ширина 10 футов 10 дюймов 3,3 м Полная масса 45 000 фунтов 20 412 кг Тандемная масса 40 000 фунтов подвеска (18143,7 кг) Двигатель CAT

Condition: good (used), Year of construction: 1998, High-performance shredder with 1.2 m rotor width Large rotor diameter of 368 mm with 64 blades 37 kW motor Engine and gearbox replaced 6 years ago Bdodpfx Ajxwwvujdujk

Condition: excellent (used), Catalogue number 7259 Bdodpfx Aderit Nloujk TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg Bodpfx Aop R I Nlsduodk ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made Bsdov Ublfspfx Adusdk – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: excellent (used), functionality: fully functional, Catalogue number 7442 TECHNICAL DATA - Infeed width: 410mm - Infeed height: 120mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 60x60mm - Top: toothed feed shaft - Bottom: 2 toothed feed shafts - Feeding belt length: 4100mm - Feeding belt width: 400mm - Auto-reverse - Main motor: 30kW - Feed motor: 2×1.5kW - Machine dimensions (L/W/H): 2300x1550x1500mm - Feeder dimensions (L/W/H): 4400x500x1000mm - Weight: 2135kg ADVANTAGES – Made in Poland – Auto-reverse (adjustable) – Equipped with conveyor belt – DTR documentation – used shredder, very good condition Net price: 76,900 PLN Net price: 18,300 EUR based on 4.2 EUR rate (Prices may vary with significant fluctuations) Bsdeufxlrepfx Adusdk

Condition: excellent (used), CATALOG NUMBER 7615 Technical data: - Inlet width: 550 mm - Inlet height: 200 mm - Shaft width: 570 mm - Knife length: 570 mm - Number of knives: 2 pcs - Sieve dimensions: 60x120 mm - Toothed feed roller, lower split type - Lower feed roller motor: 2.5 kW - Toothed feed roller, upper - Upper feed roller motor: 2.5 kW - Vibrating chute: 2.2 kW - Vibrating chute length: 3200 mm - Vibrating chute width: 490 mm - Main motor: 45 kW - Auto-reverse - Reverse function - Extraction spigot diameter: 250 mm - Machine overall dimensions (L/W/H): 2100x2000x1100 mm - Vibrating chute overall dimensions (L/W/H): 3200x700x600 mm - Weight approx.: 3500 kg ADVANTAGES – Wide feed opening – Auto-reverse (adjustable) Bdodpfx Aswa Al Nedusk – Reverse function – Used shredder, in very good condition Net price: 119,900 PLN Net price: 28,550 EUR (based on 4.2 EUR exchange rate) (Prices may change with strong fluctuations)

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR Bdedeignt Uopfx Adujk (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7595 Technical data: - Loading hopper inlet: 1400x1400mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 600mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife dimension: 40x40mm - V-Rotor - Screen: 10mm - Hydraulic pressure drawer Bedpov R E Amsfx Aduedk - Electric auto-reverse - Dimensions (L/W/H): 1810x1210x2120mm - Weight: 1220kg ADVANTAGES – Made in Germany – V-Rotor – Technical documentation (DTR) – Hydraulic pressure drawer – Auto-reverse – Used chipper in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse Bedporx T E Tsfx Aduodk - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)