Used Sliding table saws 2801-3300mm cutting length for sale (246)

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Crsln Eevyuqfo Awxob

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, cutting length (max.): 3,400 mm, cutting width (max.): 1,250 mm, cutting height (max.): 130 mm, cutting height with scoring (max.): 130 mm, saw blade diameter: 400 mm, table length: 3,200 mm, overall weight: 1,000 kg, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, Equipment: motor brake, scorer, Image 1+2: Used Hans-Schreiner HTS250-1 € 1,890.00 Image 3+4 Demonstration machine, slightly used with guarantee! € 3,300.00 Holzprofi Maker panel saw PS315F-2600 Smooth sliding panel carriage with large extension table, pivoting circular saw blade, parallel stop. Space-saving thanks to easily removable extension table. Scoring device, miter stop and eccentric clamp as standard. Technical data: Main motor power S1 3.8 kW Voltage 400 V Saw blade inclination 45° Format table size 2600 x 267mm Cutting length 2750 mm Blade size 315 mm Bo. 30 mm Scoring blade 100 mm Bo. 20 mm Cutting depth 90°/45° 100 mm / 80 mm Saw blade speed 4500 rpm Scoring blade speed 8500 rpm Extraction connection 100 mm Groove cutter thickness 6-22.5 mm Groove cutter bore 30 mm Weight 336 kg Image 5 Exhibition machine Holzprofi Maker PS315F-2000 for € 3,130.00 Image 6-11 Holzprofi KS400D-3200 € 7,120.00 Main motor power S1: 5.5 kW Groove cutter power S1: 0.75 kW Voltage: 400 V Saw blade inclination: 0-45° Format table size: 3200 x 432 mm Format table travel: approx. 3400 mm Blade size: 400 mm Cutting depth: 130 mm Scoring saw blade: 120/20 mm Saw blade speed: 3000/4000/5000 rpm Scoring saw blade speed: 8000 rpm Cutting width: 1250 mm Weight: 1000 kg Image 12: Holzprofi format circular saw KS315 including scoring unit, smooth-running format sliding carriage with large extension table, pivoting circular saw blade, finely adjustable parallel stop including miter stop and eccentric clamp. Very stable guide of the format table for precise work even with heavy workpieces. With its own motor for the scoring unit for easy switching off. Main motor power S1: 4 kW Pre-scoring motor power S1: 0.75 kW Voltage: 400 V Saw blade inclination: 0-45° Crjln Eeuf A Rxe Awxeb Format table size: 3200 x 375 mm Format table travel: approx. 3400 mm Blade size: 315 mm Cutting depth: 100 mm Pre-scoring saw blade: 120/20 mm Saw blade speed: 4500 rpm Pre-scoring saw blade speed: 8000 rpm Cutting width: 1250 mm Weight: 700 kg € 6590 incl. 20% VAT Image 13: Holzprofi FPL1600VR used machine Motor output 4.6 kW S6 (3.75 kW S1) Voltage 400 volts Max. saw blade diameter 305 mm Cutting height 0 to 90 mm Format table size 1600 mm x 316 mm Table movement 1800 mm Cutting width 835 mm Speed 4000 rpm Saw blade swivel 90-45° Weight approx. 360 kg €2990.00 Image 14: Holzmann TS250 table saw, good condition, 2 kW, approx. 85 kg €790.00

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Used SCM SI 450 E from 2001 in good condition. The machine is CE marked. See further specifications below: Crjln E Awermmz Ijxeb Technical data: Working length 3200 mm Cutting width on parallel fence: 1500 mm Tilt of saw unit: 45 degrees Max. cutting height at 90 degrees with 450 mm blade: 150 mm Max. cutting height at 45 degrees with 450 mm blade: 106 mm Blade speeds: 2500/3500/5000 rpm Motor size: 7.5 HP, 5.5 kW

Condition: new, Year of construction: 2023, STOCK SALE!!! The L'invincibile SiX represents the highest tier of panel saws. Its key advantage is the dual-direction blade tilt (+/- 46°), a supporting arm with robust THK guides, and the FULL SUPPORT sliding table, which wirelessly connects to the new 15" EYE-S display. When it comes to L'invincibile panel saws, there's little more to say—they are top-of-the-line machines, built to meet the highest user demands! TECHNICAL SPECIFICATIONS: - Saw blade diameter: 550 mm - Dual-direction tilt (+46° / -46°) - Inverter for motor speed control - Sliding table length: 3200 mm - Scoring blade speed: 6000 RPM Csln E Ajvzqdkewxerb - Rip capacity (right-side guide): 1500 mm - Scoring blade motor power: 0.9 kW - Scoring blade diameter: 160 mm - Main motor power: 9 kW - Saw blade speed (RPM): 2800 - 4200 - Max. cutting height at 90°/45°: 205 / 130 mm - Dust extraction ports (mm): 1 x 120 / 1 x 100 !!! The price does not include VAT!!! we do not provide service and installation

Year of construction: 2008, Condition: excellent (used), SAC CS40 Format Panel Saw year 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420mm, locks for easy panel loading in any position steel gliding system Main saw arbor(30 mm) 45° tilting electric raise & lower of main blade. Main motor 5,5 kW, self-braking motor utting speeds 2,600 - 4,000 and 5,600 rpm Blade diameter max 400 mm Colnshwwlpj E Awxorb max cutting height 130 mm ( 90° ) 100 mm ( 45° ) rip fence 1,500 mm scoring saw motor 0,75 kW 120 mm (Dia. scoring blade - 8,000 RPM scoring unit w/external adjustment ) Square crosscut fence with stops, extension table with miter fence & sliding outrigger support. 400 V , 50 Hz weight 820 Kg CE ,marked

Condition: like new (used), Functionality: fully functional, Selling a complete workshop with all machines and tools as well as workbenches. There is also an extraction system in the basement. The perfect option for anyone who wants to open a carpentry/joinery workshop. Crsln Ejvvti Ee Awxob The machines are also sold individually, but a complete purchase is possible. Help is provided with loading and loading can be done directly at the workshop using the transport ramp. You can see everything in the video, except for the extraction system in the basement.

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Coln E Asvyup Ujwxjrb

Condition: like new (used), Year of construction: 2006, 3 meter trolley Crsln E Aevzvixswxeb Complete machine will meet the requirements

Condition: good (used), Year of construction: 2017, *Danish one owner machine* Cuttinglenght: 3.200 mm. Motor: 7,5 hk, 400V, 50 hz. Max. Ø blade: 300/350 mm. Crjln E Awjvvk S Rsxob Tiltable sawblade. 0-45 °.

Condition: ready for operation (used), Roller diameter 500 mm Thrust 950 mm Workpiece height 400 mm Table size 900 x 900 mm Table inclination 30/10 degrees Speed 15-2300 m/min Blade length 4800 mm Total power requirement 4 kW Machine weight approx. 1.4 t Space requirement approx. 2.1 x 1 x 2.2 m Control conventional Accessories Creln E Aevy Tyfewxob Welding device Blow-out device Grinding motor

Condition: good (used), Year of construction: 2004, Functionality: fully functional, Griggio CA 400 sliding table saw Year of manufacture 2004 S/N MC 00071750 Colnetpv Abo E Awxjrb Cutting length aluminum sliding table: 3200mm Double roller on the outside mechanical height and tilt adjustment motor power 5.5 kw main blade diameter 400 mm with scoring saw blade 3 speeds: 300/400 / 600 rpm Machine according to CE standard Weight 820 kg

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Crolskuzd Hsn E Awxsb Scorer: yes Height adjustment saw blade: motorized Pivot adjustment saw blade: motorized Width stop adjustment: manual Display saw blade angle: digital Display cutting height: digital Display width stop: scale Display cutting ruler: scale Saw blade diameter: 550mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7,5 kW Motor brake: yes / automatic Suction connection: 100mm and 120mm machine length: 3600mm Machine width: 2000mm Weight: 1000kg

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Celn E Awevyupzoxsrb

Condition: excellent (used), Year of construction: 2009, Griggio Fromat circular saw SC 1400 4 kw year of construction 2009 table 1500mm Crjlnetp Tm Uo E Awxeb

Condition: good (used), Year of construction: 2020, Functionality: fully functional, Selling panel saw Winter A45 - 3200, year of manufacture 2020 CNC Deluxe, very good condition Crelevw Tr Nsn E Awxsb

Condition: excellent (used), SICAR BOOM 3200 format saw Length of the carriage 3200mm Cutting width on the right side 1310mm Main motor 5.5kw Undercutter on separate motor 0.55kw Maximum saw size 400mm Cslnjvkdife E Awxerb Cutting height max 125mm Manual adjustment of saw angle up to 45° Saw speed variable on belt 3000/4000/5000r.p.m Year of production 2007 CE certificate

Condition: new, Year of construction: 2023, Carriage length: 3200 mm Cutting width at rip fence: 1270 mm Cutting width at the cross-cut fence: 3200 mm Max. Cutting height 90°: 140 mm Max. Cutting height 45°: 99 mm Scorer: yes Saw blade height adjustment: motorized Swivel adjustment saw blade: motorized Parallel fence adjustment: motorized Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Cutting ruler display: Scale Saw blade diameter: 400 mm Speeds: 3000 - 4000 - 5000 rpm Motor power: 7.0 kW Motor brake: yes / automatic Suction nozzle diameter: 80 mm / 120 mm Machine length: 3600 mm Machine width: 1900 mm weight: 1600 kg Cjln E Ael D Rxxowxorb

Condition: new, Concept 350 Plus Partnership Edition- Cutting length 3200 mm -General equipment features:Saw unit can be tilted up to 46°Pressure beam, incl.:LED lighting with 3 differentaction colors:- WHITE: machine at rest- RED: pressure beam lowers oremergency stop function- BLUE: saw unit movesvariable support table 800 x 200 mmscoring system using main saw blade in synchronizationautomatic workpiece length detection forminimum travel distancesmovable and height-adjustable control panel,incl.:- Saw blade stand- Template holder- Emergency stop button, start button, selector switchGrooving/scoring, sawing/sawing, rotary switch- Feed speed- Switch for laser (optional)- USB socketPartnership Edition, incl.:- Motorized width stop with 4 aluminium stops that move synchronouslyAll 4 stops move up to 1,300 mm. The table is approx. 2,000 mm long.- Screen control (8" touchscreen). The graphical user interface offersthe following functions:- Tool database- Angle cut calculation at the cross-cut fence- Cutting plans can be created and saved- Programs can be saved, exported and imported on USB- Telescopic fence extendable to 3,400 mm incl. 2 digital displaysTechnical data:- Cutting length: 3,200 mm- Max. Saw blade projection: 100 mmat 90°, 72 mm at 45°- Saw blade: diameter 300 - 350 mm,bore 30 mm- Saw blade rotation: 4,000 rpm- Motor: 5 kW (= 7.5 HP)- Feed speed: 0 - 40 m/min.- Total length: approx. 4,270 mm- Weight: from approx. 1,150 to 1,550 kg(depending on equipment)- Required air pressure: 7 bar- Suction nozzle: 1 x 100 mm, 1 x 120 mm- Order AL202 - 38.060,00 € LVP / Partnership Edition 33.490,00 €Options:- Cutting line laser- Order no.: 36410451 - 985,00 € LVP / Partnership Edition 895,00 €- Saw motor with 7,5 kW (10 HP)- Order no.: ,00 € LVP / Partnership Edition 525,00 €available from stock immediately24 h ready for ?v=Heg6aO4rGdc Crjln E Asvyupnjwxeb

Condition: used, Year of construction: 2006, Carriage length: 3200 mm Cutting width at the width stop: 1300 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 150 mm Scorer: Yes Saw blade height adjustment: electric / position control Swivel adjustment saw blade: electric / position control Crjln E Awovadxxjxeb Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: Digital Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3500mm Machine width: 2200mm weight: 1000kg

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Cutting width approx. 1300 mm max. blade diameter 400 mm swiveling up to 45° scoring unit parallelogram protection control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded - Cjljvyt D Dsn E Awxsrb

Condition: new, A machine for beginners and professionals ic equipment:- Manual height and swivel adjustment 0 – 46°of the saw blade, with digital display- drive power 4 kW (5.5 hp) with a speed,4200 rpm.- Double trolley, trolley length 3200 mm- Miter stop, cutting to length up to 3450 mm- Braking device, illuminated button- saw blade diameter max. 315 mm,- Saw blade overhang max. 104 mm- Cutting height 100 mm, 70 mm at 45°- Machine height 88 cmPackage 5 including:- 5.5 kW (7.5 hp), 2 speeds- Rip fence DIGIT X, 1000 mm*- Large extraction hood (PSV)- Without scorer (prepared for the subsequent installation of ascoring unit) Coln Eevyd Duj Awxjrb

Condition: new, -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- With her strong equipment she trumps herselfthe smallest space.- The cut quality and flexibility are excellentin daily hnical specifications:Sliding table length 2600 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45 ° max. 72 mmmanual height and swivel adjustment 0-45 °Cutting width 1000 mm, manually adjustableCutting to length at the crosscut-miter fenceup to 2600 mmExtraction connection top / bottom 50/100 mmWeight 550 kgWorking height 910 mm Cjlnovyd Dns E Awxsrb

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mmused, top condition, top equipmentMake SACType CS 450Year of construction 2003Machine no. LD 2206CE-type testedMotor 5.5 kWSteel guidesCar length approx. 3200 mmCutting width approx. 1550 de diameter 450 mmswiveling up to 45 °Scoring unitControl panel can be swiveled at the topRip fence with automatic controlTable top extension approx. 940 mm x 650 mmElectric height adjustmentPositioning control 3 axesDigital display:- Height- cutting angle- Rip fence- Rotation speedExtraction connection D 100 mm / 120 mmRequired space approx. 3400 mm x 3700 mm x 1800 mmWeight approx. 1500 kgTotal connected load approx. 6.25 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Coln Esvyd Dbj Awxorb

Condition: new, The Altendorf F 25 offers everything a panel saw needs to be able to do in a small space. And all in uncompromising Altendorf quality. A machine for beginners and professionals alike. Basic equipment: - Manual height and swivel adjustment 0 - 46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4200 rpm. - Double trolley, trolley length 3200 mm - Angle miter stop, cutting to length up to 3450 mm - Braking device, illuminated button - Saw blade diameter max. 315 mm, - Saw blade projection max. 104 mm Colevyd A Don E Awxsrb - Cutting height 100 mm, 70 mm at 45° - Machine height 88 cm Package 1 includes: - 5.5 kW (7.5 HP), 2 speeds - Parallel stop, 1000 mm* - Large suction hood (PSV) - Basic scoring saw with LED lighting

Condition: used, Year of construction: 1987, used, good condition Make Ulmia Type 1728 Year of manufacture 1987 Machine no. 262 GS-tested Reinforced motor 5.0 kW Steel guides Carriage length approx. 1600 mm Cutting width approx. 950 mm Cutting length of roller table path 1900 mm Cutting height approx. 105 mm Cslnovwgibo E Awxerb Max. blade diameter 350 mm Swivels up to 45° Parallelogram protection Weight approx. 600 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty