Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Cgeliqjqakhujzgget Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Year of construction: 2006, Condition: new, System: centrifugal pump in PP Type: Someflu Cjlieizqrnjqzggogt Pump output : Q – 10 m³/h against 10 m Engine power: 2.7 KW

Year of construction: 2006, Condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Cgsliqzeizq R Ajgget Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW

Year of construction: 2013, Condition: good (used), Used progressing cavity pump Manufacturer Netzsch Type: NM063BY04S18B Machine number: 459933 Year of construction: 2013 Output: 3.50 // 18 m3/h Speed: 91/288 min1/rpm Pressure: 16 // 0.10 bar Coloillx Dsiqzggegt Are you looking for a specific pump? We have other used pumps in stock - please ask us.

Condition: used, Mixed lot Extenterschneckenpumpen , different manufacturers ( Netzsch, Bornemann, Seepex etc ) for the most part functional - but some not) dismantled from the running screaming. Only to be sold as a lot Csliqzoilu Uqoggjgt

Condition: used, System: hydraulic piston membrane pump, used Type: REWA/Abel HMD-G-50-0500 Article no.: A51-288 Construction: long Flow rate: max. 50 m³/h Cjliqoib A Eqszggjgt Delivery pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, Version: with control cabinet and frequency converter

Condition: new, ABEL contact pressure gauge for ABEL piston diaphragm high-pressure pumps. Cgslsiyp S Ijiqzggjt pump monitor, NEW ! We are your service and spare parts partner for ABEL pumps. Almost all spare parts are available from stock or at short notice.

Condition: new, ABEL molded membrane with valve rod for piston membrane high-pressure pump, filling pumps, chamber filter presses. Cgolioiyqiljqzggst NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: new, ABEL valve seats for ABEL piston diaphragm high-pressure pumps. NEW ! Cgolijiyqipoqzggst We are your supplier for ABEL piston diaphragm high-pressure pumps, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL ball with steel core for ABEL piston diaphragm high pressure pumps. Cgjliqeiyqiwezggjt NEW ! We are your supplier for ABEL pumps, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL valve ball on valve seat for ABEL piston diaphragm high pressure pumps. NEW ! Celiqzgjiyqizjgsgt We are your supplier for ABEL piston diaphragm high-pressure pumps, filling pumps, chamber filter presses, service and spare parts partners for ABEL pumps. Spare parts available from stock or at short notice.

Condition: used, Lamella separator 2 pieces identical in construction: - Manufacturer and year of manufacture unknown (probably late 70s) Cslijt Ay Scjqzggegt - Rectangular design, with discharge screws to the funnel - Dimensions: Length 9700mm, width 3500mm, height 6100mm

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Celiqzgjrnnt Ijgsgt Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: used, Used cutter suction excavator Z-243 Cgeliqzgjrq I I Nsget Operating hours: approx. 600 Application: self-maneuvering cutter suction dredger for cleaning water bodies, sludge removal from water bodies Pumping capacity: up to approx. 350 m3/h Suction dredger depth: approx. 5 m Total length with extension: 13,20 m Overall width: 2.90 m Overall height: 2.70 m Depth: 0.75 / 1.18 m Draught: ready for operation 0.62 m Suction pipe diameter: 150 mm Excavator depth at an angle: 45° for extension 5.0 m Fuel capacity: 300 liters Cutting speed (variable speed): 0-90 rpm and vice versa Cutting power: 10 kW / 13 hp Deutz main engine: 90 kW / 120 hp Transportable on the road: Yes Largest part for transport: (main pontoon with extension) 11.60 x 2.50 x 2.50 m, approx. 10 tons Cabin: One-man operation in comfortable, low-noise cabin Transport: Can be dismantled and transported by road, overseas transport in containers Pontoons: The hull consists of several pontoons connected by a proven coupling system Coating: Marine coating system and cathodic protection for optimum protection Consumption: Low fuel consumption and low total cost of ownership System: Closed throat cooling system

Condition: used, Plant: Chamber filter press used, on steel frame, semi-mobile Application: Sludge dewatering Design: R+B 1200/1200/125/30 head-guided Filter plate format: 1200x1200 Number of plates: approx. 125 Filter plates: PP Cake thickness: 30 mm Chamber volume: approx. 3.8 m3 Filter cloths: optionally available to suit the medium Filter pressure: approx. 15 bar Pump technology: optional on request Power connection: 400 Volt / 125 A (CEE) Cgjlerk Ebkjiqzggst Weight: approx. 65 tons plus filter cake Chamber volume: approx. 3.8 m³ Polymer post-dosing pump: e.g. max. 1.5 m³/h - optional on request Polymer hand attachment: optional on request - available e.g. consisting of 2 agitator tanks with agitator approx. 2m³ Sludge conditioning tank: optional - by arrangement e.g. volume approx. 1.8 cbm Purchase or hire: Inspection of the systems by arrangement at our factory. Miscellaneous: Would you like to rent or buy this plant? Please contact us, we will be happy to help you.

Condition: new, ABEL degassing valve for ABEL piston diaphragm high pressure pumps. NEW ! Coliqzgoiyqi Nogegt We are your supplier for ABEL piston diaphragm high pressure pumps and service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Year of construction: 2006, Condition: new, System: centrifugal pump in PP Type: Someflu Pump output : Q – 50 m³/h against 10 m Engine power: 9,0 KW Cgeliqzjizqrrsgget

Year of construction: 2006, Condition: new, System: centrifugal pump in PP Type: Someflu Pump output : Q – 50 m³/h against 10 m Cjliqzsizq Icsggsgt Engine power: 4,8 KW

Year of construction: 2006, Condition: new, System: centrifugal pump in PP Type: Someflu ECO I 50/200 Pump output : Q – 50 m³/h against 10 m Engine power: 4,8 KW Cslisizq Rxoqzggogt

Condition: new, membrane for HMD-G-80-1000 ABEL pump NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice. Colisizt Ryoqzggogt

Year of construction: 1989, Condition: used, Used shredder Manufacturer: Seybert & Rahier Cgjlijil Aqqsqzgget Type: RST 413 Serial no.: 158283 Year of construction: 1989 Q: l/h 0-1000 H: mWS 33 Buffer liquid: 500 cm3

Condition: used, Plant: Used decanter / centrifuge Manufacturer: Flottweg Model: Solid bowl centrifuge Type: Z73-4/454 Machine No.: 010.014.04 Year of construction: 1999 Celijppa Tceqzggegt Drum: max. speed. 2800 min-1 Perm. sediment density: 1,3 kg/dm3

Year of construction: 2002, Condition: used, Machine No..3236 Speed: 3000/3200 rpm. Cgsliqzgeppdd Sogot Drum diameter: 520 mm

Year of construction: 2008, Condition: used, Plant: Decanter Type: Hiller DP51-422 Year of manufacture:2008 Machine number: H4231 Bowl material: 1.4470 Cgeliqzgopptxdegst Total weight: 4350 kg Max. Drum speed: 3400 1/min Max. operating speed: 3300 1/min Inner drum diameter: 505 mm Drum wall thickness: 13.0 mm Separation technology: sludge dewatering by means of decanter centrifuges (solid bowl centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Cslisqa Dv Tsqzggsgt Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.