Membrane for ABEL HMD-G-80-1000

Membrane

Condition: new, ABEL molded membrane with valve rod for piston membrane high-pressure pump, filling pumps, chamber filter presses. NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice. Lasdpfoiyqiljx Ad Neg

Condition: new, membrane for HMD-G-32-0250 ABEL pump NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice. Lsdoizt R Djpfx Ad Njag

Condition: new, membrane for HMD-G-50-0500 ABEL pump NEW ! Laodpfeizt Rvex Ad Nsg We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Year of construction: 2026, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm Ljdpfxjff Agis Ad Neag temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: new, Year of construction: 2026, functionality: fully functional, MEMBRANES FOR MEMBRANE AND VACUUM PRESSES Made of silicone or natural rubber We offer high-quality silicone and natural rubber membranes for all common membrane and vacuum presses. Our membranes are available cut to your required dimensions or as roll material. SILICONE MEMBRANE MS2 Type: MS2 Material: Silicone Colour: Milky white Surface: Smooth/textured Maximum production width: 2,000 mm Shore hardness: 50 ± 3 Shore A Thickness: 3.0 mm Operating temperature: –50 °C to +200 °C SILICONE MEMBRANE MS2-50 Type: MS2-50 Material: Silicone Colour: Milky white Surface: Smooth Maximum production width: 1,800 mm Shore hardness: 50 ± 3 Shore A Thickness: 3.0 mm Operating temperature: –60 °C to +230 °C SILICONE MEMBRANE MS1 Type: MS1 Material: Silicone Colour: Milky blue Surface: Smooth Maximum production width: 1,800 mm Shore hardness: 45 ± 3 Shore A Thickness: 2.0 mm Operating temperature: –60 °C to +230 °C NATURAL RUBBER MEMBRANE MNK-R Type: MNK-R Material: Natural rubber Colour: Brown Surface: Smooth/textured Maximum production width: 2,000 mm Shore hardness: 45 ± 3 Shore A Available thicknesses: 2.5 / 3.0 / 4.0 mm Operating temperature: –20 °C to +125 °C STANDARD SILICONE SHEETING RSS Type: RSS Material: Silicone Colour: Reddish brown or transparent, other colours available on request Surface: Smooth on both sides Standard length: Cut to size or supplied as a 10 m roll, other lengths available on request Standard width: 1,200 mm, up to 1,800 mm available on request Shore hardness: 30–80 Shore A Thickness: 0.5–10 mm SILICONE ROUND CORDS RSC We also offer silicone round cords in various diameters. Type: RSC Material: Silicone Colour: Grey or transparent Standard diameters: 4–12 mm Maximum diameter: 50 mm Shore hardness: 60 ± 5 Shore A Operating temperature: –60 °C to +230 °C We will be happy to help you select the right membrane for your press and application. The stated values are guidelines and refer to normal room temperature. We reserve the right to make changes to the design and dimensions. Lasdpfx Aded S Efae Nsg

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications Ljdpfevhctwsx Ad Noag - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0