Year of construction: 1966, operating hours: 10,000 h, Condition: excellent (used), Functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. Cgjbvmstyyvwe Uz Eet The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: used, Year of construction: 1996, Technical specifications:Reel width: min. 600mm, max. 1.130 mm (1.150mm)Reel diameter: max. 1520mmCore diameter: min. 70mm, max. 150mmPrinting length: min. 350 mm, max. 720 mmCutting range cross cutter: min. 210mm (190mm), max 720mmCutting frequency: max. 1500/minSheet count per web: min. 4, max. 64Book thickness unfolded/folded: max. 6mm/12mmNumber of pockets: 3-5Size range:Unbound side: mix. 100mm, max. 245mmBound side: mix. 135mm, max. 373mmDeep pile delivery: mix. 600mmx300mm, max. 1130mmx720mmMechanical capacityRuling section: 500m/minConverting section: 100 /120 strokes/minCorresponding to books/minute: bis 720 Cgjbvovr Nc Hsm Uz Eot

Condition: new, - Engine power 7,5kW - cutting force 20to Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm - machine weight approx. 2500kg - tank capacity approx.100Liter Cjbveftnt Nom Uz Eegt - hand guard in the area of the control panel and opposite to it -colouring of body RAL according to customer's request protective grid/knife bar RAL 1028 melon yellow Ordered goods Price and further information on request

Condition: used, Straightening machine, strip straightener with adjusting gear motor LENZE straightening machine was used for cardboard approx. 350 x 1,5 mm not usable as classical straightening machine type 11.712.02.10 Output speed geared motor 12 to 72 rpm infinitely variable torque 80 to 40 Nm Straightening roll speed 19 to 115 rpm. Straightening roll width 520 mm Straightening roll diameter 90 mm Number of straightening rolls total 4 pieces Motor power 0,37 kW Mains connection 380 Volt, 50 Hz - Pair of pull rolls, drive of the lower rubberized roll via open gear drive - Speed by infinitely variable speed adjustment via handwheel on gear motor - Straightening rolls upper part mechanically adjustable Cjbvsdzp U Aem Uz Eegt - straightening unit with 3 rolls, one of the rolls is missing (rolls of the straightening unit not driven) - on stable metal base - straightening machine was used for cardboard approx. 350 x 1,5 mm space requirement L x W x H 630 x 460x 1060 mm weight approx. 160 kg good condition

Condition: used, Year of construction: 1998, Vacuum feeder n° 2 colors Manual Slotter Folder Gluer Counter Ejector Cjbvotpcapom Uz Eegt

Condition: new, · Die easy to replace · Automatic feeding with double sheet detection and automatic correction · Allows plain paper, coated paper, cardboard, PE film, etc. · Mainly suitable for stickers, tags, wine labels, playing cards, small boxes, etc. · Rotary die-cutting machine with magnetic cylinder · High pile suction feeder · Touch screen · Machine with automatic stripping Cgebvm Uzjfg Ahue Eet · Three-cylinder system, with cover plate · Precision pressure adjustment · Wrap-around ejection system · Sensor for top reading and front registration

Condition: good (used), Functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Characteristics: Capacity: max ~ 240000 T/pa Width: 4800 mm Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min Cebvm Usvptqijz Eegt

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Cgjbvm Uzeipvhne Est

Condition: good (used), Year of construction: 2006, Functionality: fully functional, punching pressure: 350 t, type of input current: three-phase, power: 4 kW (5.44 HP), Equipment - Format 82x112cm - Motorized quick-clamping frame - Cutting plate - Timer for opening and closing times - Brake on the flywheel Cjbvjrwi Hvem Uz Ejgt - Pneumatic clutch with safety valve - 3 operating modes - Manual pressure adjustment via handwheel - High-quality safety systems - CE certificate - Long-term spare parts security - Manufacturer: cauhe-industries.com

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Cobodzqmzjvm Uz Eegt Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: good (used), Year of construction: 2007, FTP SAFM 800 Year: 2007 Cobjvzg Ekovm Uz Eegt Max paper size: 780 x 1040 mm Min paper size: 340 x 340 mm Max speed: 40 m/min Weight: 1600 kg In production Available immediately.

Year of construction: 2014, Condition: good (used), Semi-automatic laminator machine Cjbvsm Amiyjm Uz Ejgt Meiguang FMB-1300A Min. size: 360x360mm Max. size: 1300x1200mm Year: 2014

Condition: good (used), Functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min Cgjbvm Uovptbuoz Est

Condition: good (used), The AccuPlace Model 3065 is a film adhesive and label applicator, designed to place items of maximum dimension 76 mm x 165 mm with high accuracy and reproducibility. Notes - 1. 8 Nos. available 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Cgsbvmevm Epfj Uz Eot Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Year of construction: 2005, Condition: used, Sun feed with wheel N° 2 bottom colors Rotary die cutter unit Cobvm Uzeu Nmfwe Ejgt Stacker cleaner Giovanardi year 1999 (max. width 2,000 mm) Max format 2400x1260

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Cgjbvou Umcqsm Uz Eet Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Condition: good (used), Heidelberg SBGZ for UV coating with dryer Max size: 56 x 77 cm Machine has roller for UV varnish Can make spot varnish and full varnish EMA UV Eko dryer Cjbvjpwkgxsm Uz Eegt Very good condition

Condition: good (used), Year of construction: 2017, working width: 1,450 mm, 1450 Automatic backlapping machine Csbvmeurivvj Uz Esgt Automatic sheet feeder Automatic carton feeder Automatic register with servo motor Output blanket

Year of construction: 2019, Condition: excellent (used), Functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm Cobvevphiyjm Uz Ejgt * Sleeve diameter max: 150 mm

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Cgebvm Uzst H Nhhj Est Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Cgsbveud Axgsm Uz Ejt

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 4,390 mm, total length: 6,334 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate Cgsbvst H Nc Sjm Uz Eet 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Year of construction: 2025, Condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline Cgobslyqrcovm Uz Eet operator platform 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2025, Condition: new, Specification: Cebvm Uelyqpdez Ejgt Maximum sheet size 570 x 820 mm Minimum sheet size 230 x 280 mm Max. cutting pressure 1.8 MN Maximum number of strokes per hours 8.000 sh h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000g/m² Corrugated board up to a maximum thickness of 3 mm Equipment Feeder Strippingstation including auxiliary pile for Non-Stop delivery Centerline 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2025, Condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Cebvolyp Emjm Uz Esgt Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machine delivery time: 6-8 month after order