Used laminating installations for sale (23)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year 2007 In Production UK Automatic thermal film laminator Automatic sheet feeder Vacuum infeed table Laminating unit with heated chrome cylinder ICS Heating unit Sheet separating unit Pile delivery unit Usable working width (mm): 1020 Minimum size (mm): 250 x 280 Maximum size (mm): 1020 x 1400 Mechanical speed: m/min. 70 Size: 102mm x 116mm min 30 x 28 cm speed up to 70 m/min Bodpfx Adjv Tbfisuodk The machine is functional, operational, ready to work.

Condition: good (used), Year of construction: 2017, working width: 1,450 mm, 1450 Automatic backlapping machine Automatic sheet feeder Automatic carton feeder Bjdpsurivvefx Aduedk Automatic register with servo motor Output blanket

Condition: excellent (used), Year of construction: 2001, Jumbo roll Ø max. 1600 mm Bdsdpfx Adsxlkckeusk Jumbo roll width min. 560 mm Jumbo roll width max. 1400 mm Expanding chucks Ø 76 mm, 100 mm, 150 mm and 300 mm Speed depending on material: 200 to 300 m/min Paper grammage: 120 to 600 g/m² Machine can be demonstrated in operation.

Condition: good (used), Year of construction: 2000, Max. Sheet format. 1420 x 1620 mm Min. sheet format: 500 x 500 mm - with MIRUS sheet feeder, type HSII - Suction belt sheet feeder, type 4R - Press belt, type 5 - Package turner (forks) with non-stop device, type 8 - Pile stacker with non-stop roller carpet, type 7 Bjdpfxetru Hze Aduodk Technical data: Working width: 1500 mm Max. Sheet width: 1420 mm Max. Sheet length: 1640 mm Lamination tolerances: +/- 1.5 mm Material thickness: - Carrier material from 0.6 - 7 mm. Single-sided corrugated board only runs through the machine with a stationary flute. - An additional needle bar is required for cardboard of approx. 400 - 500 g/m². is required. - Cover sheet from approx. 180 - 400 g/m². Deviations possible depending on material properties.

Condition: used, Year of construction: 2013, • Web width: 1300 mm • Max mechanical speed: 400 m/min (depending on materials and process) • Substrate types: Film, foil, paper, and combinations thereof Main Components and Features Automatic web tension control across all unwinds and rewinds Motorized adjustment for nip pressure and web alignment Touchscreen HMI for process control and recipe management Modular design for easy access and maintenance Web inspection and defect detection (if installed) Corona Treatment Unit Nordmeccanica Solventless Mixing Unit Continuous, inline mixing of two-component adhesive system Equipped with: Precision gear pumps for both A and B components Automatic ratio control and monitoring Pumps for continuous filling to ensure uninterrupted production Easy-access design for cleaning and maintenance Bedpfx Adsxg Hqaeuodk Drying Tunnel Equipped with 2 thermal oil heating batteries Provide stable and efficient heat transfer Maintain consistent tunnel temperature, essential for proper adhesive drying Integrated with 2 modulating valves Automatically adjust the thermal oil flow Enable fine control of tunnel temperature for different lamination applications LEL (Lower Explosive Limit) Monitoring System Zellweger LEL sensor. Continuously monitors solvent vapor concentration

Condition: good (used), Year of construction: 2007, stream feeder single-side lamination hot lamination using thermofoil or dispersion glue max speed when applying water dispersion glue 50m/min max speed hot lamination 70m/min Bsdpowl Hw Hofx Aduedk material 80 - 600 g/m2 delivery

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 6878, working width: 1,020 mm, total width: 2,000 mm, total length: 12,000 mm, total height: 3,000 mm, stack height: 840 mm, Laminating machine FK 102 S in very good used condition Sheet size min 30 x 45 cm Sheet size max 102 x 124 cm Feeder: Billhöfer A-20-P Smoothing calender: GK-4-1080 Sheet separator: Achilles BT 4.1 Stacker: Bremser S102A1 Additional equipment: pneumatic side lay by TPM electronic overlap control by PME Bjdpfx Asxb Dq Tjdusdk automatic film brake by Achilles film cutting device by TPM spare roller (lamination counterpressure) new, included The machine can laminate using both water-based and thermal films (heating units required) Dismantling/transport/possible customs duties etc. must be organized by the buyer.

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Bjdoxdimfopfx Aduedk Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Bdsdpfx Adoipvhneusk

Condition: good (used), Year of construction: 1995, Stock drum bucket + press belt Type: SFAM 712_G Year: 1995 Bdedpsu Uclujfx Aduek Max. size: 1650mm Press belt Tünkers

Condition: excellent (used), Year of construction: 2021, Coated web width 1315 mm Bjdpewqdikjfx Aduedk Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, working width: 1,250 mm, type of input current: three-phase, total width: 3,500 mm, total length: 30,000 mm, total height: 3,000 mm, stack height: 2,000 mm, Equipment: double-sided, For sale: Production line designed for manufacturing honeycomb structure laminate. The machine was custom-built for in-house use. Equipment includes: Paper unwind modules, cell forming and unwind roller module, gluing unit, calibrator, conveyors, presses, longitudinal and cross-cutting modules. The machine is ready for testing and features automatic core feeding, automatic glue feeding, stepless speed adjustment, plate heating chamber, 9 longitudinal saw sections, and a cross-cutting section. Line speeds: 2 to 6 m/min. Videos available via WhatsApp. Bdodpjw Tbawsfx Aduek

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Bdjdpfsud Axgex Aduok

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: MATRICOLA NR 1155-06, working width: 1,200 mm, type of input current: three-phase, total width: 4,000 mm, total length: 12,000 mm, total height: 3,000 mm, stack height: 1,500 mm, overall weight: 13,000 kg, Sheet laminating machine with water-based glue system + dryer. Max. format 120x160. Hot knife. Automatic stacker. Overhauled in 2020: coating rollers and heating units replaced. Bdodpew Hr Imofx Aduek

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Bodpfjvy Aipex Adujdk Machine dimensions 10130×2130×2960 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, working width: 1,650 mm, Stock laminating machine - semi-automatic Bodpfx Aetqzqhodujdk Type: A134RS. 1650x2000 Year 1998 Max.size: 1640x2000 mm Min. size: 450x450 mm Cardboard: 100-800 g/sqm Corrugated board: 300 g/sqm - 7.0 mm thickness

Condition: used, Year of construction: 2014, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm secondary unwinder: 1200 mm rewinder: 1200 mm speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Materials: Bsdpfswp R Htox Adusdk COATED WEB BOPP 12 - 80 μ, PETP 10 - 30 μ, LDPE, LLDPE 30 - 200 μ, OPA 12 - 18 μ, NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 60 - 150 μ, PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ, PETP 8 - 30 μ, LDPE, LLDPE 20 - 200 μ, OPA 12 - 18 μ, NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 20 - 150 μ, COEX FILM 25 - 200 μ PAPER 40 - 150 gr/ m2

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Bdsdpfovkg H Tjx Aduek Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 610, Cutting and printing line for 3-layer cardboard with flexo printers (2-colour printing) - maximum sheet size 950 x 2200 mm (skip - feed 1200 mm) - minimum sheet size 260 x 280 mm Bdodpfx Adjwl Izyoujk Machine dimensions length - 3550 mm width - 3660 mm height - 3500 mm weight 8000 kg power consumption - 8 kW Feeding unit to the device using a strip. The operation is supported by sucking the sheet with an air pump

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Lamina GL 1400 Year: 2017 Bsdpfewna R Ejx Adusdk Max size: 1400 x 2150 mm Min width: 70 mm Glue type: 2 guns with hot melt by Nordson Extras: 2 cold tape guns adhesive Very good condition Available immediately Located: Europe Eastern

Condition: like new (used), Year of construction: 2016, functionality: fully functional, working width: 2,050 mm, Stock laminating machine Type: A-14R55A6L7N8N/2050P Year 2016 Max. size: 2050 x 2050 mm Min. size: 500 x 500 mm Print sheet thickness: 100-800 gr. Tolerance: +/- 0,5mm Carrier sheet thickness: Bjdpsuwntrsfx Aduodk Cardboard from 350 gr. (0.5 mm upwards) Corrugated board up to 7.0 mm Solid board up to 2.5 mm - Flush laminating machine - Pile turner

Condition: used, Year of construction: 1996, Web width: 1,300 mm Mechanical speed: 300 m/min Unwind diameter: 800 mm (shaftless, single-position) Bdedpfx Adjw N Nhzeusk Rewind diameter: 800 mm (shaftless, single-position) Core diameter: 3" Web direction control: Integrated web guiding system

Condition: good (used), Heidelberg SBGZ for UV coating with dryer Max size: 56 x 77 cm Machine has roller for UV varnish Bodepwkgxepfx Aduedk Can make spot varnish and full varnish EMA UV Eko dryer Very good condition