Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Fjdex Nfhlepfx Affjpg

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction Fsdpfx Afox Ndu Defepg - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: ready for operation (used), Very well-known and reliable Cauhe die-cutting machine, format 1200x1600 mm, year of manufacture 1996, from second owner. Fpjdexz Ncbspfx Affog

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Fpjdjw R Eqbepfx Affsg Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Fpedpfx Afjx Nd U Djfjg

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. Fodpfx Afotyqizefepg In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: ready for operation (used), For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Fjdpjx A Ivvjfx Affspg Specifications and features: • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Condition: Good, clean, and working condition. Can be demonstrated immediately.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 720 mm, Model: SFML-720C Fpsdpfx Ajyxl Tyjffog Weight: 840 kg Power: 8.5 kW Voltage: 220 V Date of manufacture: 2011 CE certified

Condition: used, 2400x1650 Vacuum feeder N° 2 bottom printing unit Rotary die cutter Fpjdpfx Aoyv E S Reffog Stripper Stacker unit

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Fpsdpfx Aeubztkeffjg Year of manufacture: 2001 on plate EDIGRAPH S.A. Factory number: no nameplate Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good

Condition: excellent (used), Year of construction: 2025, operating hours: 1,260 h, functionality: fully functional, machine/vehicle number: 548, inner diameter: 38 mm, cutting length (max.): 4,000 mm, The core winding machine is designed for the production of 25-layer paper tubes with an internal diameter ranging from Ø 38 to Ø 250 millimeters. 3-year warranty. Fsdpfxsyvgcve Affjpg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W&H 18499 / W&H 14623 /Garant 1723G, total width: 2,200 mm, total length: 130,000 mm, total height: 2,300 mm, We are offering this ready-to-use Windmöller & Hölscher Triumph 3A with QMS 992 inline 4-color flexo printing unit. - For single- or double-ply paper bags - High-bottom folding (Bodendeckblatz) - Machine is currently in production and fully operational Bag Specifications: - 1 or 2-ply paper - Bag width: 180 – 320 mm - Bag gusset: 60 – 180 mm - Bag height: up to 510 mm (610 mm cut-off / tube length) Tube length / cut-off: - 460, 490*, 500, 530*, 550*, 580*, 600, 610* mm (*each format includes 4 printing cylinders) Other formats available only without printing capability. Format plates / bag widths: - 160, 165, 170, 175, 180, 210, 230, 250, 260, 300, 320 mm Max. output (depending on bag size): 40–60 bags/min Fjdpfxjyrqxaj Affopg Max. roll diameter: 1000 mm / 39" Max. roll width: 102 cm / 40" Core diameter: 76 mm / 3" QMS 992 Flexo Printing Unit: - 4-color flexo printing (without doctor blade) - Max. printing length: 1000 mm / 39" We have three additional Triumph 3A machines including QMS 992 inline printing units for sale! If you are looking to produce larger bags (up to 320 x 180 x 760 mm), we would recommend a different machine from our inventory. If you have any questions or require further information, please feel free to contact us. All machines are immediately available!

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Fedsv Ifpuepfx Affopg Possibility to sell them separately

Condition: used, Automatic DIE Cutter TMZ EW-106 with Stripping UnitBaujahr / Year 1995 - Serial-No. 2643 Format / Sheet Size min. 450 x 450mm - max. 760 x 1060mm Dicke / Thickness min. 200g/m²- max. 2.000g/m² Kartondicke / Thickness corrugated max. 6mm Geschwindigkeit / Production per hour 6.000g/h Fpsdpfxjh Uw Tls Affog Stanzkraft / Pressure total max. 300Tm Dimensions of machne L 4600mm x W 2300mm x H 2080mm Approximate net weight 13.500KGSWith Stripping Unit and double Sheet control. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2016, machine/vehicle number: 1037516, Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WSYear 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Fpodjq Rx Srepfx Affsg Speed 0-40 m/min PLC control with touch screenThe Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes. Fpsdpfxev H D Srj Affsg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2023, operating hours: 500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: DFQ1300C3-2 high speed slitting machine, 1. Specification: Slitting Material: Plastic film (15µm–150µm), paper (30–400gsm) Maximum Web Width: 1,300 mm Minimum Slitting Width: 50 mm Mechanical Speed: 350 m/min Slitting Speed: 300 m/min (depending on material) Unwinding Diameter: Ø1,100 mm (shaftless type, includes 3” and 6” clamp adapters) Rewinding Diameter: 2 × Ø600 mm Rewinding Shaft: 3” differential slip air shaft or air shaft Main Motor: 7.5 kW AC servo motor Rewinding Motor: 2 × 5.5 kW AC servo motors Unwinding Tension: 200 Nm magnetic brake Waste Blower: 2.2 kW high-pressure blower Drive System: Synchronous belt and V-belt Guiding Roller: Ø100 × 1,750 mm, hard aluminum alloy (HV700) Mechanical Structure: Cast iron and steel plate Web Guiding: EPC (Edge Position Control) Main Control: PLC + touchscreen Total Power: Approx. 28.2 kW Fodpfx Ajyuwqzoffepg Overall Dimensions: 3,700 × 2,700 × 1,400 mm Weight: Approx. 4,500 kg Standard Equipment: - Shaftless unwinding unit with 3” and 6” chucks - Hydraulic lifting system - Unwind web clamping device (splicing table included) - Line and edge web-guiding system - Slitting section - Razor and rotary blade cutter system - Laser paper core positioning system - Double rewind unit with air shaft - Constant tension pressing structure with web pinching device - Trim removal system (trim blower) - Electrical components - MITSUBISHI brand PLC - YASKAWA brand drives - Touchscreen operation Optional: 1) Differential slip rewind air shaft: 2 pieces

Condition: used, Letter Press Cylinder DIE Cutter Heidelberg KSB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Fpsdpfsyfhthsx Affjg Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Fpjdpjxwcwwsfx Affjg Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: good (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, ETERNA 1620 SAL Extra ref 2950 year 2014 maximum sheet size: 1200 x 1620 mm material: Corrugated board Fala E, B, EB, BC vacuum feeder extended feeder with sheet alignment section – mechanical register cleaning section batch delivery Fpedpfxjytum Rs Affog clamping force: 400 tons

Condition: used, Letter Press Zylidner DIE Cutter Johannisberg 104 Buchdruckzylinder / Letter Press Zylidner DIE Cutter Johannisberg 104 Year 1966 - Serial-No. 2153801 Fedpfsycrz Dsx Affjpg Size min. 360 x 520mm - max. 720 x 1020mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1988, condition: good (used), machine/vehicle number: 11801, Gietz FSA 720 Foil/stamping embossing press. size 720x520 mm, minimum sheet size 297x210, Double sheet detection, pressure 120 t, max speed 5000 sheets/h, pile height 950 mm with max 700kg, pile height on delivery 700mm, dimensions of the machine 380x280x195 cm Machine no: 11801 Fedpfx Aownqrgoffepg

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 6741108, cutting width (max.): 1,370 mm, Size 137 cm, Program, Spare knife, Excellent condition Fpjdpew Inyyefx Affsg Machine no.: 6741108

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 7141440, Size 137 cm, chromed air table, program, spare knife Machine no.: 7141440 Fodpfsw Inymox Affjpg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1024, Size min L 90 x W 75mm, max L 330 x W 160mm, maximum pile height: 150 mm, Max 1200 piles per hour Fpedjvmxtwjpfx Affsg Machine no: 1024