Condition: ready for operation (used), With control cabinet and documentation, the machine was hardly used, in inspection is possible. Cjbvm Usnkcwwoz Ejgt

Year of construction: 2012, Condition: like new (used), We have a Buhrs 1000 poly wrapping system available. Year 2013. You could modify this system to paper wrapping if you like. This machine is later on completed with a extra base and two extra rotary feeders SYSTEM INFORMATION Cgsbvm Uohid Adez Eet System brand: Buhrs Machine type: Buhrs 1000 Poly Wrapping System (max.13.000 c/h) Year: 2013 CONFIGURATION 1 Buhrs 1000 main product feeder, type shuttle feeder 1 Buhrs 1000 master base station 4 Buhrs 1000 rotary feeder 1 Buhrs 1000 module for filmpackaging with double action sealbar, max 13.000

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, Functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Csbvovy Aipom Uz Eegt Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: excellent (used), Year of construction: 2005, We are offering a Beiren MPQ1040 flat bed die-cutting machine, manufactured in 2005, known for its reliability and high performance in industrial printing and packaging operations for carton and corrugated box making. Function: Die cutting + stripping Key Specifications: Cgjbvm Uzsvzngpj Eot Model: Beiren MPQ1040 Year of Manufacture: 2005 Maximum Sheet Size: 1040 x 720 mm Minimum Sheet Size: 400 x 360 mm Maximum Die-Cutting Speed: 6500 sheets/hour Material Compatibility: Paper, cardboard, and corrugated board (up to 4 mm thickness) Features and Benefits: Precision Die-Cutting: High cutting accuracy ensures perfect results for packaging, labels, and promotional materials. Automatic Feeding System: Smooth and efficient sheet feeding for continuous operation. User-Friendly Control Panel: Intuitive controls for easy operation and quick job changeovers. Robust Construction: Built for long-term, heavy-duty use with minimal maintenance requirements. Safety Features: Equipped with protective covers and emergency stop systems for operator safety. Condition and Maintenance: Machine is in excellent working condition, fully operational, and regularly maintained. Original manuals and documentation are included. Available for inspection upon request. Additional Information: Shipping: Assistance with transport and logistics can be arranged. This Beiren MPQ1040 die-cutting machine is an ideal solution for printing houses and packaging manufacturers seeking a reliable, high-performance solution for their production needs.

Condition: excellent (used), Year of construction: 2008, Ref: 10908 . 2008 Cauhe GH260 Guillotine Very heavy duty, large format 2.6m guillotine Equipped with: Microcut+ Flat screen colour digital programming with CIP3/4 compatibility Retractable side gauges for rear loading Infrared front table safety guard Fully enclosed rear guarding Designed to meet EN1010 Part 3 “ Cutting Machines” safety standards Double-pull down knife action, giving more power and precision cutting. Pneumatic failsafe clutch and brake system. Variable pressure hydraulic clamping. Simple and safe knife change system. Stainless steel machine table. Monitored pneumatic safety latch. Twin precision rotating ball screw back-gauge drive system. Extra cut buttons, to enable cutting from left, centre and right hand side of machine. Heavy duty - weighing in at 22,000kg Material: Paper: Bible Stock Double wax Printing Photographic Felt Duplex Bank Gummed Carbon Blotting Chromolux Parchment Writing Tissue Tracing Csbvm Uzevmf Are Ejgt Card Bristol Art Board: Duplex Finish News Hardboard Straw Multiplex Wood pulp Wood/other: Veneers sandpaper felt raw rubber Leather Emery cloth Linoleum Lead foil Hard rubber cork Plastics/textiles: Acetate film Cellophane PVC Celluloid Textile fabrics Transparent film Specification: Max. cutting width: 2600mm Max. pile height: 160mm Cutting length:2600mm Front table length: 800mm Table height: 940mm Machine length: 4700mm Machine width: 4600mm Machine height: 1800mm Clamp width (min cut): 145mm Cycles per minute: 22 RPM Back-gauge speed: 150 M/s

Condition: used, machine/vehicle number: 36 057, Roller glue spreader, laminating machine, laminating machine, laminating machine, layering machine Cjbvm Uzsirnwbj Eegt -Manufacturer: Hymmen, glue application machine layer machine type 36 -Working width: 1300 mm -Roller diameter: Ø175 x 1300 mm / Ø235 x 1300 mm / Ø85 x 1300 mm -Individual components: see photos -Dimensions: 2230/1100/H1410 mm -Weight: 1260 kg

Year of construction: 1965, Condition: ready for operation (used), Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg. Cjbvm Uolc N Szsz Ejgt

Condition: excellent (used), We have a BECK HV600 shrinktunnel available. This machine is ready after complete maintenance and is working like new! Csbvjhcdhlom Uz Ejgt The measurements are in the pictures.

Condition: excellent (used), Well-functioning PFE brand inserter Csbetuditjvm Uz Esgt In operational condition

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 12-23, A fully automatic cutting machine for Tissue paper rolls. High precision servo control system - "Control Techniques" Cutting large rolls Diam. up to 280mm - in single channel. Cutting rolls in two channels - up to max. Dia. of 140mm Automatic lubricant spraying system and air cooling for the blade. The machine complies with CE Safety standards. Specifications: - Product cutting dia.(Max)– 280 mm - Cutting speed Max – 160 cuts/min (x 2 lines = 320 Toilet rolls/min) - Computerized controlled functions: * Product and trim length * Cutting speed * Sharpening frequency and advance * Blade lubrication frequency * Fault display * Counter (coded) * Inlet conveyor and hoper transferring logs automatically from the ewinder into the cutting channel. * Choice of program according to the various products. - Clamps – machine is supplied together with 4 rigid pneumatically operated clamps, according to customers products dia. - Blade dia. – 600 - 800 mm - Electric supply – 12 kw x 380 v Cgjbvm Ujup U Rajz Eot - Air pressure – 1/4 hose 6 atm - Dimensions – 6.5 x 2,2 x 2.4 m - Weight – 3500 kg

Condition: good (used), Year of construction: 1996, 2 lines of ridgid box making machines with an extra lid-closing machine at the end of the 2 lines. Price is 25.000,- € for each line. Sold only as set. Cebvm Uji Dpb Usz Eogt

Condition: used, Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production Cobjf D Az Njvm Uz Esgt -Kannegiesser System: BRILKA -Kannegiesser: cut and twist collar. -pneumatic: foot switch -Dimensions: 520/900/H1190 mm -Weight: 33 kg

Condition: ready for operation (used), Power consumption: 20kWh, compressed air supply: 6bar, connected load: 22kVA, with documentation. Cgebvm Uel Ax Sxjz Ejt

Year of construction: 1968, operating hours: 35,000 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. Cjbvmetyy Sfs Uz Eegt In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Year of construction: 1994, Condition: ready for operation (used), Format: 0.2/ 0.7/ 1l. Csbvmsgquvij Uz Ejgt

Condition: ready for operation (used), Format: 320-640x320-860mm, weight: 7t. Csbvm Uzoht Hfij Esgt

Year of construction: 2012, Condition: ready for operation (used), There are eight identical label dispense available, speed: 0-80m/min, output: 1000 label/ min, length: 700mm, width: 320mm, height: 500mm, including accessories. Cjbsflmc Nsvm Uz Eegt

Year of construction: 2010, Condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Cebvm Uzokkiwxe Eogt

Year of construction: 2018, Condition: ready for operation (used), Paper tube length/ diameter: 1000-1600/ 20-160mm, connected load: 1.5kW, length: 4600mm, width: 1500mm, height: 1400mm, weight: 680kg, with instruction manual. Csbvm Uzjilqr Se Esgt

Year of construction: 1972, Condition: ready for operation (used), Format: 1000x700mm, an inspection is possible. Cjbvm Usqzkdqsz Eogt

Year of construction: 2011, Condition: ready for operation (used), Connected load: 2kVA, length: 1200mm, width: 767mm, height: 1292mm, weight: 228kg, with two film rolls. Cgjbvm Uohvrpujz Est

Condition: ready for operation (used), Sheet format: 890x1180mm, inner frame width: 820x1120mm, pressing force: 300t, motor power: 4kW, length: 1800mm, width: 2100mm, weight: 4.3t. Cgjbvm Uoht Hfmsz Eot

Condition: ready for operation (used), Working width: 1320mm. Cgobvmsip D Rwo Uz Eet

Year of construction: 1994, Condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Csbvm Uoix Ahbsz Esgt

Year of construction: 2007, Condition: ready for operation (used), Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t. Cgsbvm Uof H Dlboz Ejt