Die-cutting machine

Sanwa TRP-1150-SE

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit Podpfjt H Nhhex Abasrc 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: excellent (used), - 30kW engine - built-in dryer - Max. working pressure 7.5 bar Prodpfx Aewlcq Nebaoc

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 90301143, Foil cutter for hot stamping foil, max. 840 mm, 610 meters. Rewinding optional. Prjdpfx Ajy D H Shsbasc

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Predpfx Aoycv Dvsbaoc Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: excellent (used), Year of construction: 2010, ATLAS COPCO GA22FF screw compressor with air dryer after service Technical data: Prodpov Uyxksfx Abaoc capacity: 3.10 m3/min; 22 KW engine; max pressure 9.5 bar; year; 2010 mileage; 8776h!!! 15200 net 18696 gross The compressor is fully functional, ready to work, warranty we provide service.

Condition: good (used), Year of construction: 2000, Atlas Copco ZT30 Air compressor Prjdsvtcw Tepfx Abajc Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO GA30 30Kw 2015 SPRING COMPRESSOR! Screw compressor ATLAS COPCO GA30 machine with heat exchanger after service Technical data: capacity: 5.40 m3/min; 30 KW motor,; 7.5 bar max pressure; year;2015 mileage;8114h!!! 23500 net 28905 gross Prsdpfx Abetqc I Ieaoc Compressor fully operational,ready to work,warranty we provide service.

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO GA30 30Kw 2015 SPRING COMPRESSOR! Screw compressor ATLAS COPCO GA30 machine with heat exchanger after service Technical data: capacity: 5.40 m3/min; Prjdstqc Eyopfx Abaec 30 KW motor,; 7.5 bar max pressure; year;2015 mileage;11330h!!! 23500 net 28905 gross Compressor fully operational,ready to work,warranty we provide service.