Used miter saws for sale (94)

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor Dodpsi Dfidsfx Ahbouw with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° Dujdpsyxxzwjfx Ahbsw - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1988, Double Mitre Saw Düspohl DGK 400 B Duodpfx Ahsyv R Nzsbsw Stock number: 001071 Double Mitre Saw Düspohl Type: DGV 400 B Year of manufacture: 1988 Swivelling saw blades Max. cutting length: 2500 mm Approx. cutting height: 70 mm Max. saw blade diameter: approx. 300 mm Was used for door frames Motor power: 4 kW Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Dodpfx Ahjk H Ic Uebeuw Image: similar. Machine is still in original packaging.

Condition: used, Technical specifications: Dujdpfx Ahezhubisbjw Max. blade diameter: 300 mm Max. cutting height: 110 mm Max. cutting width: 2,800 mm Adjustable blade angle up to 45° Pneumatic clamping system Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2.5 kW Overall dimensions: Length: 1100 mm Width: 3600 mm Height: 1300 mm

Condition: used, Technical specifications: Maximum saw blade diameter: 300 mm Maximum cutting width with two blades: 2700 mm Minimum cutting width with two blades: 250 mm Capability for angled cutting Motor power: 2 x 2.2 kW Dusdpfxszht Tqe Ahbjw Power supply: 380 V Dimensions: Height: 1300 mm Length: 3600 mm Width: 1000 mm

Condition: used, Technical specifications: Dusdpfjzht Saox Ahbew Max. blade diameter: 300 mm Cutting range: 45° Pneumatic clamping Blade guard Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 1.5 kW

Condition: excellent (used), functionality: fully functional, MITRE SAW model OMS SALVARANI FC 300 RAP with dust aspirator second hand machine working conditions : good CE regulation : Yes complete with extractor cabinet volt. 380/50 blade diameter mm. 300 Dsdpfxozghdzj Ahbeuw

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm Djdpfx Aszdkttshbeuw MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: used, cutting width 330 mm Cutting height 135 mm Motor output 2,2 kW Dodjy Tpqlepfx Ahbsuw The Graule type ZS 135 cross-cut saw is a pivoting cross-cut saw for cutting to length and mitre cuts.

Condition: excellent (used), Saw – miter saw Pertici Univer 40mm Blade diameter: 400 mm Blade bore: 30 mm Motors: 2.2 kW Max cutting width: 190 mm Max height: 110 mm Duedpfxexmhf Sj Ahbow Two angle adjustments for cutting CE certificate DTR documentation

Condition: excellent (used), Brevetti Junior 250 double frame saw Cutting width max 60mm Cutting height max 60mm Cutting at an angle of 45° Max saw size 250mm Duodpfswdw Tvsx Ahbsw Cutting cycle up and down Smooth saw feed adjustment Motor power 2×1.5kw Extraction nozzles 2x 100mm

Condition: excellent (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Dujdpfxswwhhdo Ahbjw Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: excellent (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Dodpfoyybyfox Ahbjuw Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: ready for operation (used), functionality: fully functional, saw blade diameter: 250 mm, rotational speed (min.): 3,250 rpm, Brevetti C15 Double Mitre Saw Dedpfexyxhdex Ahbjuw Machine designed for cutting at a 45° angle Applications include trimming: decorative frames, cabinet door frames, glazing beads Saw blade size max/min: 275/250 mm Saw blade speed: 3250 rpm Motor power: 2×1.5 kW Pneumatic material clamping Pneumatic feed of the cutting unit 2x extraction ports 100 mm

Condition: good (used), Code: 0390 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Djdpey Tk I Ssfx Ahbouw Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 110

Condition: good (used), cutting width 300 mm Cutting height 85 mm Motor output 1,5 kW Djdpsyiu Sfjfx Ahbsuw saw-blade dia. 300 mm connected load frequency 380 V

Condition: used, cutting length ca. 2.200 mm mitre angle 45° - 90° workpiece max. 50 x 70 mm Dusdpew D Dfxsfx Ahbow

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg Dsdjygm Akjpfx Ahbjuw - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: good (used), functionality: fully functional, Double blade radial saw OMGA RADIALMATIC 900-5 Min./max. working length: 130/2700 mm Dsdpfx Ahey Sr H Tsbsuw Cutting height: 125 mm Cutting depth: 825 mm Blade diameter: 400 mm Motor power: 2×3.68 kW

Condition: ready for operation (used), Year of construction: 2000, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 300 mm, height adjustment type: mechanical, total length: 132 mm, total width: 104 mm, total height: 160 mm, overall weight: 130 kg, cutting length (max.): 700 mm, mount diameter: 30 mm, OMGA RN700 Radial Saw Specifications: - condition - used - manufacturer - OMGA - model - RN700 - disc diameter max 300 mm - disc diameter min 295 mm - spindle 30 mm - saw motor - 2,94 kW - maximum dimensions of the cut piece 80 x 700 mm - guards on the saw for the safety of the saw operator - retracting cable for the body of the saw - adjustment of cutting in three planes - suction nozzle fi 80 mm - 2000 year of production - the machine meets CE standards Dusdpfeuf R Huex Ahbow - weight - 130 kg - overall dimensions - 132 x 104 x 160 cm ( W x L x H ) Additional information: - the machine is in excellent technical condition, ready for immediate use - the pictures show the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and transportation costs

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation Dodpfeyyyfyox Ahbouw - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions.

Condition: good (used), functionality: fully functional, Table and mitre saw TGS 173 with sliding table - on mobile base unit with 2 drawers - Adjustable feet NOT included Transport available at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers. Dujdpfox R Eadjx Ahbew

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Dedpfxjt Uk Rms Ahbsuw

Condition: excellent (used), functionality: fully functional, Saw in very good condition. Includes towing brake. Dsdpsy Tt Hdefx Ahbouw