Used label Systems for sale (116)

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340 Bsdpjpyg Tbjfx Ac Necu  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control

Year of construction: 2018, condition: repair required (used), functionality: limited functionality, machine/vehicle number: E01.1.0238.0119.18.1, Demo machine – has not previously been used in production. Being sold due to relocation. The xCUT is the ideal machine for customers requiring all-in-one label production. With the xCUT and a Memjet printer, it is possible to print, laminate, die-cut, and produce a finished label roll in a single pass. › Fully servo-controlled die-cutting unit Bcjdpfx Acsxzp H Te Nou › Digital printer can be integrated › High-precision re-registration › Integrated laminator The system die-cuts and laminates inline with a printing system at speeds of up to 12 meters per minute, or 28 meters per minute in rotary mode, making it suitable for higher volume jobs as well. Another benefit is that the die-cutting process is not decoupled from the printing process; both can be executed in a single operation. Although these machines may appear complex, they are significantly easier to operate compared to systems in the digital cutting segment. Unfortunately, the machine cannot be fully operated because the unwind unit is not functioning. We believe this could be resolved via a software adjustment, but since we do not have a support contact and the unit is not essential for our production, further effort is not worthwhile. The servo drive batteries should be replaced and the machine generally needs to be properly calibrated. A function test and demonstration can be arranged. We are happy to assist with shipping and disassembly. Die-plates in various formats, laminate, and label rolls are also included. Schematics / documentation folder available.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, For sale: Automatic industrial labelling machine designed for labelling round containers of various capacities starting from 25 ml (and similar dimensions). The device is fully operational and ready for immediate use. Technical specification: • Type: Automatic industrial labelling machine • Container capacity: ~50 ml (ideal for cosmetics, pharmaceuticals, food products) • Operating mode: Continuous – integrated belt conveyor • Label type: Self-adhesive from roll • Control: Control panel with digital display • Drive: Electric motors with gearboxes • Power supply: Standard 230V • Construction: Stainless steel – robust, corrosion-resistant and easy to maintain • Adjustments: Height and width of guides, pressure rollers, and labelling head • Labelling speed: Adjustable according to requirements • Conveyor belt width: up to 113 mm • Vertical working range: up to 250 mm • Horizontal working range: up to 113 mm • Conveyor belt height: up to 50 mm • Max label height: 30 mm (can be modified to 195 mm with a simple adjustment) Compatible devices can be found in our other listings. Complete production lines can be configured: • Automatic labeller for containers from 25 ml and similar • Automatic capping and cap application machine • Stainless steel cap feeder • Automatic labeller with belt conveyor – self-adhesive labelling system • Stainless steel rotary infeed/outfeed table for production lines Application: • Cosmetics industry – labelling vials, cream and oil containers • Pharmaceuticals and laboratories – vials, bottles, supplements • Food products – sauces, samples, spices • Household and technical chemicals – small liquid containers Advantages of the device: Bcodpfx Acoxftnvs Nsu • Fully automatic operation • Highly precise label application • Robust industrial construction • Intuitive control panel • Adaptable to different container sizes (with minor configuration changes) Included in the set: • Complete labelling machine with integrated belt conveyor • Bottle guiding and stabilising system • Adjustable labelling head • Control panel • Freestanding version – ready for integration into production line Technical condition: Used, in very good condition. Regularly serviced. Ready for operation. On-site testing possible. VAT invoice issued. Technical support and training available on request.

Condition: good (used), Year of construction: 2019, DOMINO N610i | DIGITAL UV INKJET LABEL PRESS (up to 7 colors including high-opacity white) • High-resolution digital UV inkjet system for professional label production • Supports up to 7 colors (CMYK + White + White) • 600 dpi native resolution with 4 grey levels (nominal 1,340 dpi) • Print speeds up to 75 m/min • Wide range of compatible substrates: paper, PET, PP, PE • Designed for industrial, household, personal care, automotive, chemical, pharmaceutical, food, and beverage applications • Short setup times and consistent print quality • Durable Domino construction and global service support _____ 2. MACHINE DATA Specification Details Manufacturer DOMINO Model N610i Technology UV Inkjet Year of Manufacture September 2018 First Installation February 2019 Operating Hours 6,110 hrs (as of November 2025) Installed Colors CMYK + White + White (6 channels active) Print Resolution 600 dpi native incl. 4 grey levels (nominal 1,340 dpi) Printing Speed Up to 75 m/min Web Width Up to 340 mm Print Width Up to 333 mm Printheads 18 Kyocera Micro-Piezo printheads (4 replaced in 2025) Ink Type UV-curable inks Drying System Integrated UV curing units Substrate Compatibility Paper, PET, PP, PE Digital Front-End ESKO RIP Version 2.2 Unwind Unit Max. 1,000 mm Ø Rewind Unit Max. 1,000 mm Ø Machine Dimensions W 570 cm • D 200 cm • H 180 cm Ink Cabinet Dimensions W 120 cm • D 52 cm • H 81 cm Bcedpfx Acsxzr Ims Nsu Production Status Machine currently in operation Availability Estimated end of February 2026 _____ 3. INCLUDED COMPONENTS • Domino N610i print engine with 18 Kyocera Micro-Piezo printheads • UV curing system • Unwind unit (Ø 1,000 mm) • Rewind unit (Ø 1,000 mm) • Vetaphone corona treatment module • Web guiding module • Web cleaning system • Anti-static control system • Digital front-end with ESKO RIP v2.2 • Color management system • Remote diagnostics & support capabilities • Ink cabinet • Complete operator workstation • All components supplied in 'AS IS' running condition

Year of construction: 2007, condition: ready for operation (used), Offered is a Kocher + Beck rotary die cutter/rotary die cutting system, sheet die cutting machine approx. year 2007. Sheet format X/Y approx. 500mm/720mm, material thickness up to max. 0.5mm, die cutting width max. 540mm, unwind max. 732mm, axial adjustment of the magnetic cylinder: +/-7.5mm, machine dimensions X/Y/Z: approx. 2100mm/1150mm/1500mm, weight: approx. 450kg. Inspection possible by arrangement. Bsdpfsxy R E Uex Ac Necu

Condition: good (used), Bluhm Weber Legi-Air- 4050S Labeling Machine 4.14.1 Basic construction The machine is designed as a closed aluminum profile frame and is very compact. The control cabinets are integrated in the lower part of the frame. Bcodpfx Aoibh Tkoc Neu The main valve terminal is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touch screen. The control panel is mounted on the right side of the rack. A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly. 4.14.2 Functional sequence - The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2. In these two stations - Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices. - After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station. Bluhm Weber Legi-Air- 4050S

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 4785, product width (max.): 300 mm, working width: 290 mm, roll width: 290 mm, type of input current: three-phase, overall weight: 11,000 kg, total height: 2,200 mm, total length: 10,200 mm, total width: 2,000 mm, Equipment: documentation/manual, URGENT SALE: Nilpeter B 3000 - High Quality Flexographic Printing Machine! We sell the Nilpeter B 3000, a reliable and efficient flexographic printing machine that is perfect for fast production of labels, packaging and flexible materials. This machine offers precise printing, easy management and high speed, making it ideal for printers, packaging companies or small businesses. The B 3000 is known for its durability and high-quality manufacturing capabilities, with options for a variety of colors and materials. Condition: very ood Key benefits: Fast and efficient,easy to maintain, low maintenance costs and easy replacement of parts. Flexible use: Supports a variety of materials, from plastic to paper. Urgent opportunity: Need to sell quickly due to business change - first offer accepted! Price: EUR 9,999 – we are negotiating for a quick purchase! Contact: For more information, pictures or a trial run, please contact. Location: Zemun, Serbia Why now? This machine is an investment opportunity - don't miss out! Get in touch urgently and step into more efficient production. Don’t miss out on this opportunity!1× NILPETER B-3000, year: 1994, 6 x UV letterpress + UV drying, 1 x UV flexo + UV/ 3 x rotary cutting station, 1 x unwinding station, 1 x rewinding station, 1 x rewinding station, 5 x automatic control for magnet processing, 1 x corona print, electronic control of cylinder registers, plenty of print and magnetic cylinders and spare parts. • Max. Web Width: 300mm,min web width 110mm, • Spare uv box for screen station, Command unit for the uv station plenty of rubber rollers for uv unit... • Operating instructions and electrical diagrams in English Bcodov Rpc Rspfx Ac Nju

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Complete with controller Year - November 2022 In excellent condition Bjdpetq E Rkefx Ac Njcu

Condition: good (used), Label letterpress printing machine Iwasaki, machine no. 1499, 3 colors, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, in good condition, immediately available. 3 machines available. Working width: 21 cm and 18 cm. Upon request, we are happy to inform you about additional machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Bedpjiphikofx Ac Nocu

Condition: good (used), Year of construction: 1991, General Features: • Age: 1991 • Punching/Die-Cutting size: 220 x 260mm • Heavy-duty German industrial design • Solid cast-iron frame for high cutting precision • Electric drive system suitable for continuous production • Designed for commercial printing and finishing operations • User-friendly operation • Long lifetime typical of BUSCH guillotines Included: • Standard documentation (if available) • Machine as inspected at current location Condition: • Good working condition for its age • Can be tested under power Bsdpexxlbhofx Ac Necu • No known issues reported • Clean mechanical condition typical for BUSCH machinery

Condition: good (used), Year of construction: 2018, functionality: fully functional, For Sale: CARTES GT364VHSR (2018) Condition: Pre-owned, carefully maintained, fully functional Availability: By arrangement The CARTES GT364VHSR combines advanced technologies with a modular design, making it one of the most competitive solutions on the market. It not only guarantees premium finishing results but also enables the production of high-value labels with maximum efficiency and economy. Main Configuration - Modular machine with MHPS system: Automatic, independent positioning of each unit. 1. Infeed Unit - Servo-driven Ø76mm pneumatic expanding shaft (reels up to Ø800mm / 200kg) - Automatic web tension control based on reel diameter, end-of-material automatic stop - Electronic web guide with ultrasonic sensor, splicing table, pneumatic clamps & tape dispenser - High-sensitivity photocell for print mark or contrast point detection - Fully servo motor-controlled web transport - VETAPHONE Corona treater system, 2 kW 2. Flexo Varnishing Unit - Full rotary flexo varnishing with UV dryer (40–160 W/cm) - TRESU closed chamber "V" unit 3. Hot Stamping & Embossing Unit - 2 transverse and 1 longitudinal foil feeders - Hologram photocell & gauges 4. Silk Screen Printing Unit - Flatbed for full backgrounds, spot & tactile printing - UV curing system (29–250 W/cm) - Vacuum table for multiple frame sizes 5. Semi-rotary Die-Cutting with AGS & IDS - Gearless magnetic cylinder, die thickness: 0.2–2 mm - Air Gap System (AGS): Perfect cutting depth control from the first cycle, minimizing waste and die breakage - Image Distortion System (IDS): Software-based die adaptation (+/-20%), allowing reuse of existing dies for different repeat lengths 6. Powerscope BST 5000 with motorized support 7. Outfeed Unit - Fully servo-driven draw & rewind system with slitting (10 razor blades) Bodpexwl Dmsfx Ac Njcu - Two Ø76mm shafts (up to Ø800mm & Ø500mm reels), automatic tension control (CW/CCW) - Additional Ø25mm shaft for special applications - Ø76mm matrix shaft (up to Ø500mm reels), optimized for high-speed matrix stripping of intricate shapes - PC for remote diagnostics & updates (Cartes support) Key Advantages - Highly modular configuration adaptable to production requirements - Multiple advanced finishing technologies integrated in one system - Cost efficiency via reduced waste and die reuse - Remote support & updates for long-term reliability Additional Equipment - Comprehensive accessory package included - Extensive range of spare parts available

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s Bcedjt D E Aiopfx Ac Nsu General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: good (used), Year of construction: 2008, OMET FLEXY S330 Year of Manufacture: 2008 _____ Technical Specifications: - Number of Colors: 8 - Web Width: 350 mm - Print Width: 330 mm - Drying System: o UV drying on all stations o 3 additional hot air dryers Unwinder: Single Rewinder: Double _____ Additional features: Bcodpfsu St R Esx Ac Nou - 3 Corona Treaters - 1 turn bar - Material thickness: Min. 50 μm, Max. 350 μm - 1 Turn Bar for cold foil lamination - 2 Cutting Stations - 1 Laminating Unit for varnishing and self-adhesive lamination - Coldfoil - Camera Inspection _____

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Bcjdsxw Uqvepfx Ac Nsu Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: good (used), Year of construction: 2000, SANJO PO3-350 / Offset Labelpreess We present this SANJO PO3 Offset Labelpress max format 254mm x 330mm / year of manufacture 2000 Machine details:  Year of construction: 2000  Printing process: 6 x Offfset (Toray)  FLEXO VARNISH UNIT Bcjdpfxeu I Nu Ss Ac Neu  unwind unit  CORONA DISCHARGE UNIT  2 x HOTSTAMPING UNIT  1 x AIR COOLING DEVICE  UV AIR COOLED UV UNITS  FLATBED DIE CUTTING STATION  SANJO REWINDER with SPOR VARNISHER  MULTIPASS UNIT  High Speed modification has been included Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: LST20217541, stack height: 100 mm, overall weight: 350 kg, total width: 810 mm, input current: 20 A, total height: 1,060 mm, total length: 2,540 mm, input voltage: 220 V, input frequency: 50 Hz, PFi Blade B3+ Specifications: Working area: 210 x 297 mm - 400 x 600 mm Grammage: 120 - 400 g/m2 (depending on tool use) Cutting thickness: up to 1.3 mm Cutting speed: up to 800 mm/second Cutting tolerance: +/- 0.3 mm Blade material: tungsten steel Feeder: Stack feeder with 5 combined lifting and dragging suction cups Feeder capacity: 100 mm Control systems: CCD camera Power supply: 220 V, 50 Hz, 20 A, 4 kW Bodpfx Ajwi Nkwsc Nocu Dimensions (L x W x H): 2,540 x 810 x 1,060 mm Weight: 350 kg The machine has been overhauled in our workshop and serviced according to the manufacturer's specifications. The warranty is 6 months. The machine is available from our warehouse in Barsbüttel near Hamburg. Optional shipping within Germany is negotiable. On-site installation and training (within Germany) are negotiable. A maintenance contract is available.

Condition: as good as new (ex-display), Year of construction: 2022, 450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder Bodpfx Aoh Uctvec Njcu 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding Width: 40mm Total Power: 8KW Power Supply: 3PH+N+PE Air Source: 0.8MPa (As 40*30 products, 25m a small roll calculation: 3000m raw materials, average 30 minutes a roll of raw material. Every 25m a small roll and rewinding 6 rolls at the same time. 720 rolls can be produced in 10 minutes) Machine in stock in our showroom

Year of construction: 2010, condition: excellent (used), MECTEC A2220/B-C160-110/110-L ID.NO. 2504 Mectec label applicator without wave function year mod 2010 including conveyor belt. Dimensions 150 x 100 H 180 cm. Bodpfx Acoki Tqve Nocu

Condition: excellent (used), Year of construction: 2018, Converting Line GM 330 FB-D (Hot stamping + Screen printing) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Maximum web width: 350 mm Minimum web width: 50 mm Maximum unwind diameter: 700 mm Maximum rewind diameter: 600 mm - Vetaphone Corona Treater - BST Web Guiding System Hot Foil Stamping Unit (Flatbed) Speed: 6,000 impressions/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with 250 mm diameter Substrates: 50–500 µm Plate thickness: 5-10 mm (7 mm standard) Stamping pressure: 30 tons Foil feed in both transverse and longitudinal direction (rotatable turret) Temperature range: 80° - 130° C Heating time approx. 20 min. Screen Printing Unit Bsdpfxjw I T Ucs Ac Necu Speed: 4,000 cycles/h or 5-15 m/min Web width: 110 mm - 330 mm Frame size: 660 mm x 500 mm Frame type: 30 mm x 30 mm aluminum frame Printing area: 330 mm (length) x 330 mm (width)

Condition: good (used), Year of construction: 2011, Manufacturer / Model: ASAHI DEGRAF AWP 1116 PD with AWP FILTER Type: Water-wash flexographic plate processor with filtration unit Year of Manufacture: 2010 / 2011 Location: Germany _____ Technical Data Unit Model Serial No. Year Electrics Power Amperage Main Processor ASAHI DEGRAF AWP 1116 PD 830 010 03-2011 400 V 3PH + N 50/60 Hz 19 kW 28 / 48.5 A Filter Unit ASAHI DEGRAF AWP FILTER FJD 383 011 10-2010 230 V 3PH 50 Hz 2 kW 6 / 10.5 A Bjdpfx Aexq A Icjc Nscu _____ Machine Description • Automatic Asahi water-wash flexographic plate processor for AWP plates • Integrated drying, washout, and filtration sections • Touchscreen control panel with display for speed, temperature, and plate length • Adjustable washout speed and bath temperature • Separate AWP Filter unit for closed-loop water recycling • CE-certified, stainless steel construction • Compact and reliable design for continuous operation • Machine currently installed and operational _____ General Condition The equipment is in good working condition, complete and well-maintained. It can be inspected in operation at its current location by prior arrangement. All parts and panels are original and fully functional. _____

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories Bjdpexq A Hlsfx Ac Njcu • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Year of construction: 2016, condition: good (used), Manufacturer / Model: FLEXOR TYO 380 2C Type: Slitter / Rewinder / Die-Cutting Line Year / Serial No.: 2016 Manufacturer: EMIS Sp. z o.o. (Poland) Location: Labelpressshop / Germany Condition: Used – in good working condition Availability: Immediate Technical Specifications Specification | Details ---|--- Max. web width | 380 mm Min. slitting width | 20 mm Max. speed | 320 m/min (product-dependent) Max. roll diameter | Unwind 800 mm / Rewind – dependent on configuration Pneumatic unwind shaft | 1 pc – 75 mm diameter Magnetic cylinder range | 80 – 192 teeth Drive system | Fully servo-controlled Slitting system | Shear knives with cassette insert Die-cutting modules | Double die-cut unit with two servo-driven advance shafts Web guiding | E+L (web guiding system) Missing label sensor | Installed (up to 12 lanes) Additional features | Glitter rewind module / Touch panel operation / Dual servo shafts Languages available | German / English / Polish Included Accessories Description | Details ---|--- Magnetic cylinders | 80 – 1 pc, 92 – 1 pc, 95 – 1 pc, 96 – 1 pc, 104 – 1 pc (total 5 pcs) Manuals / documentation | Available at seller’s site Electrical connection | 3 × 400 V, 50 Hz, 32 A CEE plug Air requirement | min. 6 bar Machine Dimensions & Weight Length: 2.6 m Width: 1.4 m Height: 1.9 m Weight: 2.5 t Power consumption: 12.5 kW Bodpfx Acjxph Nis Nscu

Year of construction: 1993, condition: good (used), Manufacturer / Model: ROTOFLEX/ VSI 400 & Ixor Type: Label inserter / cutter / slitter / rewinder with inspection Year / Serial No.: 1993 – 2019 / VLI1254970403P Location: Labelpressshop / Germany Condition: Used – excellent working condition Availability: Immediate Technical Details Max. web width: 400 mm Paper weight range: 90 – 160 gsm Bcedpfxoxph Ifs Ac Neu Max. unwind diameter: 700 mm Max. rewind diameter: 400 mm Shaft diameter: Unwind 76 mm / Rewind 76 & 40 mm Max. speed: 230 m / min Equipment included: Unwind unit with tension control & web guide, splice table with clamps and automatic web holders, Ixor digital label inserter with touchscreen panel, knife unit with up to 6 razor knives and separators, visual inspection and missing-label control, two rewinder spindles for fast changeover Power supply: 230 V / 50 Hz Safety systems: All machine safeties installed and fully functional

Year of construction: 1999, condition: good (used), Type: Slitter / Rewinder with inspection system Year / Serial No.: n/a / R240-840427 Location: Labelpressshop / Germany Condition: Used – functional Bcedpfsxph H Ijx Ac Nju Availability: Immediate _____ Technical Details Description Web width: up to 250 mm Max. unwind roll diameter: 700 mm Max. rewind roll diameter: 400 mm Unwind shaft diameter: 76 mm Rewind shaft diameter: 76 mm & 50 mm Machine speed: 0 – 230 m/min Operation: Electric drive with foot pedal Power supply: 220 V, 1 Ph, 18 A, 50 Hz Main function: Rewinding rolls in register to smaller rolls with inspection and counting (labels/meters) Inspection system: Visual strobe light for missing label detection Knives: Up to 7 razor knives Tension control: Installed on unwind unit

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Manual colour registration Web guiding control One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Bcjdexrdb Hepfx Ac Nsu Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Units for web-turning, peel-off, lamination included Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.