Used flexographic printing presses for sale (81)

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L Blsdpevakdzefx Aduor SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: good (used), Year of construction: 2006, 8-color web width: 330 mm Bljdpfx Ajxzr Eroduor Corona UV etc.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, • Model: SIAT L33 150 TC • Machine in very good condition, completely overhauled in 2022. • Machine type: Semi-automatic, three-color flexographic printing press • Color printing: Up to 3 colors • Web width: 150 mm • Printing width: 150 mm • Suitable for: PVC, OPP, Acrylic OPP, cellophane, paper, and reinforced films • Applications: Primarily for printing on self-adhesive tapes • Central impression drum: Heated, with ceramic drums • Rewind: Automatic rewind turrets with automatic coupling of printed tape to empty cores • Corona treatment: Yes • Slitting: By razor blades • Drying: 3 hot air drying tunnels • Speed control: Up to 160 m/min, adjustable via inverter Blsdpfoxznwkox Aduer • Maximum roll diameter (unwind): 360 mm • Maximum roll diameter (rewind): 300 mm • Unwinder shaft diameter: 3 inches

Condition: good (used), Manufacturer: Bieffebi Tip: Mirage Bljdpfxjixtn He Adujr Cylinder length: 1350mm Cylinder diameter: 340mm

Condition: excellent (used), Year of construction: 2021, 1 color flexo printing machine Manufacturer: Altinisik Makina Model: AA1290 Year of manufacture: 2021 Format: 1290x1800 mm With skipfeed: 1550mm min. 350x750mm Cardboard thickness with special thickness up to 28mm Bodpfxjtuvuue Aduelr Speed up to 7,000 Bg/h

Condition: used, Year of construction: 1989, DCM HAC 1400/5 Flexographic 5 Colour Printing Press (1989) With Inkmaster Ink Dispensing system Comprising of: Bjdpfexn N U Rox Adujlr ENR web feed (1994) DCM web cutting (1994) AFS Corona AVE-150D surface treatment system (2021) Inkmaker PICCS15-21-007 ink dispensing system

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Blsdpfxoxzrx Es Adusr Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: good (used), Year of construction: 2006, web width: 330 mm Bsdpoxzr Dzefx Aduolr Corona 8-color UV Cold In Production etc.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: UZ0611, working width: 1,320 mm, type of input current: three-phase, overall weight: 40,000 kg, total height: 5,300 mm, total length: 12,800 mm, total width: 6,200 mm, compressed air connection: 6 bar, Fully operational 8-color printing machine. Equipped with BST Eltromat visual inspection system, Bosch Rexroth drive system, and Tresu ink pumping system. The machine comes with an up-to-date record of preventive and corrective maintenance, numerous software updates, and traceability of replaced components. Bljdexwm Hijpfx Adujr

Condition: used, Year of construction: 2003, Flexographic label printing machine GALLUS EM 280 • Unwinder • EL web guide • Corona treatment • Contact web cleaner • Delam-relam • Turnbar • 8 flexo units • 8 UV dryers • Cold foil unit Blodpoxr Didsfx Adusr • 2 Die cutting units • Waste matrix rewinder • Sheeting unit • Camera view system

Condition: good (used), Year of construction: 2002, Göpfert Impression 16/20 Prefeeder Serco Year 2002 6-color flexo with chambered doctor blade system Max. speed: 10,000 sheets/h Max. size: 1520x2000 mm Board thickness: 1-9 mm Vacuum stacker Bjdpfx Aexlzbdsduelr

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Blodpoxuwanofx Aduor Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: used, Year of construction: 2006, Configuration: • Unwinder • Teknek web cleaner • Corona treatment • 6 flexo print stations • 6 × IST UV dryers • Cold foil module • Cold foil unwind/rewind • Lamination module • Laminate unwinder • Die-cutting section with 3 stations • EL camera system • Rewinder Tooling included: Bodsxzq T Uopfx Aduelr • Print cylinders + magnetic cylinder + varnish roller: o Sizes: Z87, Z96, Z110, Z132, Z140 o 5 print cylinders of each size o 1 varnish cylinder for print station 6 • 16 anilox rollers Additional information: • End of 2024: full revision of the printing units and related tools completed.

Condition: good (used), Year of construction: 2006, GALLUS EM 410 Bjdpfxsxzr Awj Adujlr Year: 2006 10-color Cold foil etc.

Condition: good (used), Year of construction: 1991, functionality: fully functional, product width (max.): 2,500 mm, working width: 2,500 mm, roll diameter: 1,500 mm, year of last overhaul: 2024, We have available for sale a Cobden Chadwick pre-print press line- 2500mm wide- see photographs. This is a fantastic opportunity and is the best conditioned pre-print press we have ever offered for sale/relocation. The machine controls were upgraded by Pre-Print Technology Ltd in 2017 – new servo control deck positioning + downstream register system. Please kindly let us know as soon as possible if you would like to visit the site to inspect the press line. Cobden Chadwick Linerflex press - manufactured 1991 Machine location: United Kingdom Cobden Chadwick Linerflex press consisting of the following 6 colour C.I 1 colour pre-tint unit with cantilever Blodpfjt Uc Iqjx Adusr 1 colour downstream unit with cantilever Twin Wood & Stirling unwind Marquip splicer Warburton rewind Drive system for pre-tint, chill rollers, varnish unit and rewind Drying: IR cassettes by Waverley Fife web guiders Sero motors for print deck positioning Original press performance parameters; Maximum speed: 300 metres per minute Repeat range: 700mm to 2000mm all units Gear pith: 10mm Maximum print width: 98” PLC: Mitsubishi Main press frames: Light blue azure Ancillary equipment Heaford Cobra mounter proofer AV Flexologic Mounter proofer Print roll stock (120 off) including print gear and sleeve attachments Anilox roller stock (17off) including anilox gear and clutch attachments. Cantilever print sleeves (12off) Print roller and anilox storage racking system with overhead hoist C.I temperature control unit Chiller unit for chill rolls Print unit doctor chambers with related inking system Mobile operator trolley for print deck access Mobile Print roller and anilox roller trolleys C.I hoist lifting attachment bar Machine voltage: 415V, 50hz

Condition: used, Technical data: Printing width: 600 mm Colors: 4 Bledpjxxmz Nefx Adusr Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used

Condition: good (used), Year of construction: 2007, Web width: 410 mm 9-color Corona Bjdpfx Adjxzrz Tsuolr Die Cutting Coldfoil Unit etc. In Production

Condition: good (used), Year of construction: 2010, Printing & Drying • 8 × flexographic print units • GEW UV lamps installed on all sections • Chilled impression drums (visible in photos) _____ Converting & Finishing • Kocher & Beck GapMaster die-cutting system • Delam / Relam unit with compensator • Foiling / combo unit • Matrix section & rewinding path visible in the line _____ Web Handling • Unwinder • Rewinder Blsdpfx Aoxxa Rdeduor • Web guide • Tension control • Various rollers and carriers • Touchscreen main control (Siemens panel) • Operator panels at each station _____

Condition: good (used), Year of construction: 2011, Model: NILPETER MO4 Printing Width: 420 mm Number of Printing Units: 9 total (1 x Flexo + 7 x Offset + 1 x Flexo) Printing Process: Combination – Offset & Flexo Cylinder Gears (Tooth Counts): 200T / 192T / 184T Offset Units: 7 complete units including: – 7 blanket cylinders – 7 plate cylinders Flexo Unit: 1 integrated flexo printing station with cliché cylinder Additional Configuration: 1 lamination station installed after the final unit Gear Sets Included: – 7 blanket cylinders (200T) – 7 plate cylinders (200T) – 1 cliché cylinder (200T) – 7 blanket cylinders (192T) – 5 plate cylinders (192T) – 1 cliché cylinder (192T) – 7 blanket cylinders (184T) – 7 plate cylinders (184T) – 1 cliché cylinder (184T) Magnetic Cylinders: 1 × 184T 1 × 192T 1 × 200T Web Width: up to 420 mm Substrate Range: self-adhesive paper, film, foil Additional Features: UV curing, lamination, sheeting & die-cutting capability Condition: Good, complete with cylinders and accessories Location: Germany Bledpfxjxv A D Is Adusr Availability: Immediate _____ TOOLING & ACCESSORIES • Full set of offset cylinders and gears (184T / 192T / 200T) • Magnetic cylinders (184T, 192T, 200T) • Flexo cliché cylinder and lamination station • Complete technical documentation • Additional spare parts and tools available upon request _____ GENERAL CONDITION The press is in very good mechanical and visual condition, complete with all main printing units, gears, magnetic cylinders, and accessories. Ready for demonstration and inspection in Germany.

Condition: good (used), MPS EF 410 - 8 color Label Printing Machine Ref.: FGT 25-230 We are pleased to present this 2008 MPS EF 410 - a high-precision, versatile UV flexo press designed for a wide range of applications. The MPS EF 410 model is a servo-driven, 410mm wide, multi-substrate press, capable of running self-adhesive materials as well as unsupported plastic films. With robust features and premium components, this machine is engineered for reliable, high-quality production. _____ Key Specifications & Configuration - Printing Width: 410 mm - Technology: Servo-driven UV flexo press - Substrate Handling: Spiral rollers and chill drums for multi-substrate versatility _____ Machine Features - Unwind Unit with Lift - Web Guide & Splice Table Bljdou Rdgbopfx Adusr - Teknek Web Cleaner - 8 Flexo Printing Units for optimal color flexibility - Automatic Registration Control ensuring precise alignment - Delam/Relam with Web Turn Bars - enables printing of 2 colors on reverse side - Anti-Static Bars across the web path - 9 GEW UV Dryers providing efficient curing _____ Enhanced Finishing Capabilities - Full Rail System allowing for tool movement along the press - Overlamination/Cold Foil with UV drying for premium effects - Double Die Station: o 1 x K&B Gapmaster Die for advanced control o 1 x Tecnocut Electronically Adjustable Anvil - Dual Web Inspection Cameras (Top & Bottom) - Razor Slitting for precise edge cutting - Waste Matrix Rewind and Product Rewind units _____ Additional Equipment & Accessories - Impression Cylinder Sets (x8): Sizes include 68, 72, 74, 77, 78, 80, 84, 88, 90, 93, 96, 99, 102, 104, 108, 114, 120, 128 - Magnetic Cylinders: Sizes include 136, 144, 148, 154, 160, 168, 176, 180, 93, 96, 99, 102, 104, 114, 120, 128 - 22 Anilox Rolls in various sizes for consistent ink distribution _____ Technical and Optical Condition: - Technical: 9/10 (checked and in excellent running condition) - Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: good (used), Year of construction: 2009, Technical Specifications - Year: 2009 - Location: Germany - Availability: Immediate - Current Condition: Dismantled; can be reassembled for testing with materials Printing Features - Number of Colors: 8 - Printing Width: 330 mm - Printing Repeat Range: 8 mm - 24 mm - Max Unwind Diameter: 1000 mm Additional Specifications - Material Width: 350 mm - Max Mechanical Speed: 200 m/min Suitable Materials - Paper - Light cardboard - Adhesive paper Additional Components - Unwinder: Equipped with FIFE Electronic Web Guide - Laminating Unit: Cold laminating unit on rails - Backside Printing Unit: Paper tipping unit on rails Drying System - UV Dryers: 8 UV RAY ovens, 330 mm each - Ventilation: 8 fans - Control Cabinet: For command protection and control Converting Unit - Die-Cutting Unit: Configured for two dies, with one die included - Scraping Unit: Pneumatically adjustable pressure roller - Longitudinal Cutting: Rotary blades with pneumatic control - Die Position Adjustment: Micrometric, electrically adjustable longitudinally and transversely (+/- 10 mm) Rewinding Unit Bljdpfx Asu N Hldsduer Additional Features - Magnetic cylinder replacement organizer - FIFE Video Camera

Condition: good (used), Year of construction: 2009, Exclusive Offer for OMET VARYFLEX VF 530 F1 🌟 🔹 Color/Webwidth: 8 x Flexoprinting / 530mm 🔹 Brand: OMET 🔹 Year: 2009 _____ ✨ Features at a Glance ✨ 📄 Designed for Versatility This advanced printing line is perfect for self-adhesive labels on a variety of materials, from paper to plastic films! 🎨 🎛 Unwinder & Web Cleaner Includes a single-side contact web cleaner and corona treatment for optimal material preparation. 🎨 8 Flexo Printing Units with Sleeve Technology Complete with 8 pull-out ink cassettes for easy color changes. Plus, a reverse printing kit on the 1st unit! 💡 UV Drying & Cold Foil Capabilities Equipped with 8 GEW UV lamps and a cold foil unit on sliding rails for metallic effects and high-end finishes! 🔧 Die-Cutting & Finishing Two rotary die-cutting stations with a hoist for quick magnetic cylinder changes. Plus, a longitudinal scissor cutting unit with 4 knives for precise slitting. 📸 Inspection system BST Eltromat camera for real-time monitoring and a vision system for accurate register control. _____ Bjdpfx Adeu Ik Uyeuslr 💼 Included Equipment 💼 🟢 Complete set of sleeves Various sizes of cliché sleeves and holders, designed for seamless compatibility and versatility. 🌈 22 Anilox Cylinders Multiple line counts and volumes for flexible ink application and printing quality. ⚙️ 4 Magnetic Cylinders Ready to meet diverse cutting and finishing requirements with sizes Z120, Z135, Z168, and Z176. _____ 📝 Ready to Take Your Label Printing to the Next Level? 📝 This OMET VARYFLEX VF 530 F1 from 2009 offers premium performance, flexibility, and all the tools needed for professional label printing.

Condition: good (used), Year of construction: 2013, Manufacturer / Model: ASAHI DEGRAF AFP 912 EH QDLF Type: Flexographic Plate Processor (Exposure – Heating – Drying – Light Finishing) Year of Manufacture: 2013 Location: Germany _____ Technical Data Model: AFP 912 EH QDLF Serial No.: 362.068 Electrics: 400 V 3 PH + N / 230 V 3 PH – 50/60 Hz Power: 9.5 kW Amperage: 15 / 28 A Weight: 720 kg _____ Machine Description Blsdpfx Adjxq A Iijusr • Combined exposure, drying, and light-finishing system for flexographic plates • Suitable for Asahi AFP series plates (solvent and water-wash types) • Top-loading design with UV exposure and integrated heating unit • Touchscreen control panel with process parameter management • Compact all-in-one design for plate exposure, post-exposure, and light finishing • Stainless steel internal structure with advanced temperature control • CE certified – built by Degraf S.p.A., Italy • High-quality UV system for uniform and stable exposure • Machine complete and operational _____ General Condition The unit is in good working condition, complete and well-maintained. It is currently installed in production and can be inspected in operation upon prior appointment. All components and drawers are intact and original. _____

Condition: like new (used), Year of construction: 2015, Manufacturer / Model: GALLUS EM 280 Type: 6-color flexographic printing press with UV curing and converting units Year of Manufacture: 2015 Web Width: n/a Location: Labelpresshop Condition: Used – fully functional, very clean condition _____ Blsdpfexn S U Hsx Aduer Configuration Unit Description / Details 6 × Flexo printing units Equipped with GEW UV curing (6 UV stations) 1 × Turn bar Installed 1 × Die-cutting unit Standard rotary die station 1 × Label shifter Installed 1 × Hot foil unit Can also be used for cold foil 1 × Screen printing unit Installed Unwinder / Rewinder Integrated Web guiding system Installed CE Marking Machine CE-certified UV system 6 × GEW UV dryers

Condition: good (used), Year of construction: 2000, MPS EP 410 – 10 Colors Type: 10-color flexographic printing press with UV curing and multiple converting units Web Width: 410 mm Year of Manufacture: 2000 Location: Labelpresshop Condition: Used – fully functional Configuration Unit Description / Details 10 × Flexo printing units Each equipped with GEW UV lamps Screen printing Possible on print stations 1–7 Unwinder Installed 2 × Die-cutting units Operate as Gap Master Hot foil unit Gilding unit Cold foil unit Installed Laminating unit Installed Delam / Relam unit Allows printing on adhesive side Web guiding system Installed Rewinder Installed Corona treatment Installed CE Marking Machine CE-certified Included Accessories Set of magnetic, printing, and screen cylinders + anilox rolls Anilox Rolls The machine is supplied with the following anilox rolls, all in usable condition: • 500 L/cm – 2.8 cm³/m² • 400 L/cm – 4.5 cm³/m² • 305 L/cm – 4.1 cm³/m² • 320 L/cm – 6.2 cm³/m² • 180 L/cm – 7.0 cm³/m² • 260 L/cm – 5.7 cm³/m² • 145 L/cm – 8.0 cm³/m² • 300 L/cm – 7.5 cm³/m² Bsdpjxn S Iysfx Aduelr • 305 L/cm – 4.1 cm³/m² Printing and Magnetic Cylinders The MPS EP410 comes with a complete set of printing cylinders (PC) and magnetic cylinders (MC) in various sizes. Quantities and diameters according to the current owner's list: T 96 – 1 MC / 10 PC T 98 – 0 MC / 7 PC T 100 – 1 MC / 10 PC T 104 – 1 MC / 10 PC T 108 – 1 MC / 0 PC T 112 – 1 MC / 10 PC T 116 – 1 MC / 10 PC T 120 – 1 MC / 10 PC T 124 – 1 MC / 10 PC T 128 – 0 MC / 10 PC T 135 – 1 MC / 10 PC T 136 – 1 MC / 10 PC T 141 – 1 MC / 2 PC T 148 – 0 MC / 3 PC T 184 – 1 MC / 10 PC T 192 – 0 MC / 2 PC All cylinders are used but in serviceable condition; actual condition may vary. General Condition • Supplied with full set of anilox rolls and cylinders • Immediately available