Used Pottinger Novacat 225 H Crw for sale (25,052)

Condition: used, Year of construction: 2008, Quick blade change / Fjdpjt A Smxofx Adujgk

Condition: used, Year of construction: 2010, First registration: 07.05.2010 / _____ / PTO shaft 540 rpm / lower link pin KAT II / hydraulic reverse swing / drive speed 540 rpm / drum mower with center suspension / Fedpjqrruxofx Adujgk

Condition: used, Year of construction: 2013, Working width 8.76 - 9.56 m hydr. edge protection folding hydr. support pressure control / quick blade change Parking supports Operation Power Control PTO shaft / Fjdpfet Sr R Asx Adujgk

Year of construction: 2025, condition: new, New OS-225-NX Nitrogen PSA Generator with the delivery for 505.2 Nm³/h at 5 bar (g) and a purity of 98.0 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 20.21 m³/min Pressure 7 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 505.2 Nm³/h Nitrogen pressure: 5 bar (g) Purity: 98.0% Equipment: Nitrogen Generator OS-225-NX Compressed Air - Pressure Dew Point Sensor Air-Purity-Control Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor Fgjdpfxswa I Ebo Aduek -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: new, functionality: fully functional, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,740 kg, lifting height: 2,736 mm, Year of construction: 2023, operating hours: 5 h, total length: 2,928 mm, construction height: 2,140 mm, drive type: Diesel, load capacity: 1,015 kg, construction width: 1,040 mm, Yard loader Condition: New machine Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Fgodpfjwkavyjx Aduok Rear tires Condition: 80 - 100% 3rd valve, roof cover, Hydr. quick hitch, 2 x LED work lights on the swing arm,

Condition: good (used), Year of construction: 2012, operating hours: 619 h, load capacity: 2,000 kg, lifting height: 6,115 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, empty load weight: 4,000 kg, mileage: 619 km, Electric duplex forklift from the German brand Still, year 2012; ONLY 619 hours on the clock; Capacity of 2,000 kg; Lifts up to a height of 6,115 mm; Overall height 2,610 mm; Equipped with FREELIFT; Equipped with SIDESHIFT and FORK POSITIONER; 2022 battery with external charger; video will follow. Fgedex Exbwspfx Aduok

Condition: used, This used and robust stacking rack is a flexible and space-saving solution for storing pallets and goods in warehouses and distribution centers. With its generous dimensions of 2150 x 1100 x 310 mm (L x W x H), the rack is suitable for storing up to two Euro pallets side by side. The construction is made of hot-dip galvanized steel, Fgjdjx Ahpispfx Adujk

Condition: used, Year of construction: 2013, Stainless steel 316, double-walled: 98 L, 3.5 bar, 150 °C // Reactor: 3500 L, 1 bar, 95 °C // With three-blade agitator on three levels (total 9 blades), 3.6 kW, 250–1435 rpm – please request the drawings! Supplied with a pump. Fgodpfxjx E S I De Aduok

Condition: used, Year of construction: 2005, total height: 1,200 mm, total length: 8,120 mm, total width: 850 mm, Weight: 1.240 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 535 Fgodpsx A S Upsfx Aduok - Main motor power [kW]: 6.0 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Options: Automatic pusher system - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 8120mm x 850mm x 1200mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 This 3-axis H. Winter Routermax Basic 1325 Eco was manufactured in 2021. Ideal for precision CNC routing, this machine offers robust performance for woodworking and other detailed applications. Consider the opportunity to buy this H. Winter Routermax Basic 1325 Eco CNC router. Contact us for more information. Fgjdpfxsx D D S Ae Aduok Application Types CNC Wood Machining

Condition: used, tank capacity: 2,950 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: 4 feet made of V2A; total height stated is estimated Speed: 1475 rpm Outer diameter: 1,600 mm Inner diameter: 1,400 mm Total height: 3,500 mm Heating/cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 151 °C Max. permissible operating overpressure: 5.0 bar Max. overpressure: 2.5 bar Agitator: Dissolver Support type: feet Location: Bremen Technical documentation: drawing, TÜV papers Cylinder temperature control: double jacket Nameplate: Vacuum: 0.9 bar Volume: 2,950 litres Double jacket volume: 148.0 litres Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last application: pharmaceutical Fsdpfx Adexqadzsusgk TANK Max. permissible operating temperature: 138 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulating jacket: hermetically welded Insulation material: mineral wool Insulating jacket material: stainless steel Insulation thickness: 70 mm EQUIPMENT Manhole / dome: in upper head (DN 500) Outlet: available MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator arrangement: offset in upper head Agitator equipment: additional 1 propeller on agitator shaft Top head wall thickness: 5.7 mm

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Fedpfxoxmvb Ij Aduogk Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: used, machine/vehicle number: W09SSK338L0H49954, axle configuration: 3 axles, first registration: 11/2020, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - SAF Assen = Remarks = Structure Fgsdpfx Ajx Ez Duodujk Volume: 95 m3 = More information = Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 50% Rear axle 3: Tyre profile: 50%

Condition: used, Year of construction: 2013, Stainless steel 316, double-walled: 130 L, 3.5 bar, 150 °C // Reactor: 6,935 L, 1 bar, 95 °C // With 3-blade agitator on 3 or 4 levels (total 12 blades), 5.5 kW, 68 rpm – please request the drawings! Supplied with a pump and filling hopper (cobalt dosing system). Fgsdpfex E S H Hex Aduek

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Weight: 1.240 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 100658 - Main motor power [kW]: 7.5 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fsdpfx Adswniuajuogk Yorick Diebels

Condition: new, Circular saw blade HSS diameter 225 mm Fgjdpfxemxi T Uo Aduek Number of teeth 180 pitch 4 mm width 2 mm Bore 32 mm (28419) unused, from magazine liquidation

Condition: good (used), Technical data for the pallet racking upright: Racking system: Dexion Type: S 4 Included in delivery: 01x pallet racking upright, used Material color: Sendzimir galvanized Type: H Profile dimensions: 81.7 x 77.21 x 2.5 mm Including horizontal and diagonal braces, base plates. The uprights are pre-assembled (bolted truss construction) Height: 11,050 mm Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Fgjdpfxsxxq Tvj Aduok This item is only available for collection. Transport or shipping of this item is associated with additional costs, which can be specifically requested from us depending on the delivery location and scope of delivery.

Year of construction: 2019, condition: used, Dehumitiser - Luchtbevochtiger Type : DA310 Fgsdox Dtngepfx Adusk

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Fjdpfex Dkrpox Adujgk Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: used, HM-ZN 8500 undercutting saw Serial number: 277 Connection Voltage: 400V- 6,6KW Weight: 1400 KG Saw blade max: 700mm Fgodpfx Aswnhz Sjdujk Saw blade min: 600mm Bore: 30mm Saw blade tiltable Length automatic feed: 9500 mm Length output conveyor: 4300 mm Total dimensions: 15000x1500x1800 mm (LxWxH) - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. Fodpfx Aex Dkq Ssduegk - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, Year of construction: 2002, - Year: 2002 - Documentation available: No - CE certificate present: No Fgsdpfx Adewnh T Isujk Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, Undercut cross-cut saw HM-D 6500-R Serial number: 319 Connection Voltage: 400V- 11KW Weight: 2450 KG Saw blade max: 550 mm Saw blade min: 500mm Bore: 30mm Length automatic feed: unknown Available from August 2024 Fjdpfx Adjwng Sisuegk - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 319 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total height: 1,900 mm, total length: 1,800 mm, total width: 1,800 mm, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Fgsdpfx Adjxzgrgeuek - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 388 - Main motor power [kW]: 6.0 - Max. saw length [mm]: 9500 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 550 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 9000 - Output table length [mm]: 3650 - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 1800mm x 1800mm x 1900mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 1,550 mm, total length: 1,400 mm, total width: 1,100 mm, Weight: 1.500 kg - Documentation available: No - CE certificate present: No - Max. saw length [mm]: 6000 - Max. saw height [mm]: 230 - Input table length [mm]: 6000 - Options: Automatic pusher system - Transport dimensions: 1400mm x 1100mm x 1550mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Fedpfxjxixh Ae Adujgk