Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear Crjlqjcuh D Re Hqznob -Drive: 1.5 / 2.0 kW -Drill speed: 2200/4400 rpm -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm -Height adjustment: max. Mm -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg

Condition: used, length: 1.800 mm width: 1.100 mm height: 1.200 mm Crslst Sbc Ieq Hqznsb division: 32 mm Number of drills: 26 engine: 1,5 kW Gannomat hole drilling machine for drilling dowel holes or rows of holes in workpieces.

Condition: used, Bit mortiser Crslsr Iqixsq Hqznob 380V

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Pluging: Three-phased Power: 1,5 Kw Motor: 2 CV Overall dimensions Lenght: 1200 mm Width: 1250 mm Height: 1650 mm Weight: 350 Kg Crslqsui Ebhs Hqznjb

Condition: used, Fittings drilling machine, row drilling machine Crelq Hqzjb A Hd Hensb -Support table: 2200 mm -Multi-spindle head: 5 drills -Drill distance: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240kg

Condition: used, Engine: 1.1 kW // 2,700 rpm. * Foot operation. Celq Hqslfcnwjznsrb

Condition: ready for operation (used), Technical characteristics Semi-automatic 13-spindle multi-spindle drilling machine Distance between chucks : 32 mm Center distance between first and last chuck : 384 mm Max. drilling depth : 75 mm Spindle speed : 2800 rpm Cast-iron table 600 x 400 mm Max. workpiece dimensions : 600 x 3000 mm 1.5 hp motor 1 vertical pneumatic presser Cycle start with foot pedal Operating pressure 6 bars Colq Hqzjttdm Dsnerb Power and Motors Voltage: 380 V Pluging: Three-phased Power: 2 Kw Motor: 1,5 CV Overall dimensions Lenght: 750 mm Width: 560 mm Height: 1200 mm Weight: 160 Kg

Condition: used, Drill stand, drill stop, drill press stand, drill jig, drill bushing jig -Quick release device -Max. Height: 100mm Crslq Hqzod Rh Rcjnjb -Dimensions: 400/240/H220 mm -Weight: 22 kg

Condition: used, table width: 1.080 mm division: 32 mm Hole drilling machine or dowel drilling machine Dübelfix for drilling dowel holes or rows of holes in workpieces. Crjlqjtuv Iyo Hqznob Table width: 1,080 mm Pitch: 32 mm

Condition: ready for operation (used), Technical characteristics 5 inferior heads Variable inter axis value Hydro pneumatical Max length 3500 mm Power and Motors Voltage: 380 V Pluging: Three-phased Crelq Hqerfr Nijznsb Overall dimensions

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear Cslsf Dlureq Hqznjrb -Workpiece clamping; pneumatic -Number of drills: 21 pieces. 32 mm grid -Bore head: swiveling -Bore depth: max. 80 mm -Height adjustment: max. 80 mm -Underframe: transport castors that can be steered on 4 pieces -Dimensions: 1090/1330 / H1460 mm -Weight: 433 kg

Condition: used, Support table: 300 x 37 cm Engine: 1.6 kW Celelfcntjq Hqznjrb engine: 1,6 kW MAW BEV electric pneumatic cup band drilling machine for drilling cup bands or fittings.

Condition: ready for operation (used), Technical characteristics multi-spindle drilling head (7) 3-axis manual orientable stroke 125 mm 4 manual length stops pneumatic cycle pedal control worktop height 900 mm Caractéristiques-perçagePneumatical adjusting cyclesPedal command Crelq Hqjtx Hxpjznsb Power and Motors Power: 2.2 Kw Overall dimensions

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 3x drill heads available -Price: per piece -Dimensions: 470/120/H150 mm Cslq Hqzob A Rmgonjrb -Weight: 7 kg/piece

Condition: like new (used), Shank: 8 mm Crelqsvbhaio Hqznjb diameter: Mainly 5.8 & 4.5 mm Quantity: 30 pieces material: HSS

Condition: ready for operation (used), Technical characteristics Power and Motors Overall dimensions Crolq Heryt A Ijqznsb

Condition: used, Quills, processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. Feed: stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill machining units available -Price: per piece Crolqsb A Iiaj Hqznob -Weight: 25 kg/piece

Condition: used, Spindle mount: MK 2 Connected load: 750 W // 400 V // 50 Hz Drilling performance: 25 mm Celet Rmbyjq Hqznorb

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. Crolqek Rticj Hqznsb SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm Cjljb A Rttoq Hqznorb -fixed, without feed -Number: 8x drill heads available -Price: per piece -Dimensions: 700/120/H150 mm -Weight: 11 kg/piece

Condition: used, Working width: 720 mm working width: 820 mm Cjlqjlfcn Es Hqznsrb Max. passage: 45 mm Max throughput: 120 mm Drilling depth vertical: 45 mm, horizontal: 120 mm

Condition: ready for operation (used), Technical characteristics Power and Motors Crelq Hetqq Hpeqznob Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 1142 mm Width: 800 mm Height: 1140 mm Weight: 300 Kg

Condition: used, Wood step drills, wood drills, countersinks, end mills, drill holders, click quick-change chucks -for: Line drilling machine, fitting drilling machine -from: a wood workshop Crjlqob A Rbms Hqznob -15 kg: milling cutter, drill bit, countersink, click quick-change chuck

Condition: ready for operation (used), Technical characteristics 4-head CN drill transfer at the end of the tenoner can be part of a production chain Power and Motors Crelq Hqzjrt Sapsnjb Overall dimensions

Condition: used, Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm -Thread recording -Adjustable drilling distance: 15-65 mm Celq Hqzeb A Tcpenerb -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece